View Full Version : dreambox setup plzz
i need help to setup dreambox from basic can anyone help me plzz
Your first issue is which image, there are multitude of images have a browse of the forum and pick one you like than can do the rest of configuration.
1st thingis wat hardware i need to connect it wid my laptop im totaly new wid dreambox so can u plz xplain me evrything
If you want it to connect it to a laptop it will need to be connected to your network, for that the DM can be connected either by wifi or hardwired. The sponsor sells a tenda wifi module as well as homeplugs tht will enable you to do that
Once done, you should be able to see the DMin your network onthe laptop or tbrough your browser by entering the ip addy of the dm
A file transfer proggy like cute ftp or flash ftp, this allows you to connect to the box, as you will need to work in the box for bouqeuts, services,connection line, etc,,,etc,,,
You will however need to be connected to the internet, so you will have to connect to your router, with a rj45 straight ethernet cable, to get your self an ip address for your box,
You will have to download an image that is compatable with your box, i do believe they are on this site in the downloads for the dreambox box... just for starters m8 !!!
sorry, just to add, you can use dreamup to install your image straight to the box from your lappy, if you are not to familiar with the fts programs....
a good place to start would be by reading this thread.
http://www.world-of-satellite.com/showthread.php?11225-Dreambox-500-for-noobies
can i connect dreambox wid my cable instead of connecting it wid my dish ? thxs guys realy appriciet ur help. and do i need to connect my dreambox to put file on my to my laptop wid ethernet wire ?
if it's a DM500's ie a satellite receiver then it must be connected to a satellite dish in order to receive it's channels, if it's a DM500'C then it's a cable receiver and must be connected to a cable tv feed.
if you want to connect to your box with dream up, then you will need an RS232 data cable, as you do not need an ip addess to install the image, so you do not need an ethernet [ RJ54 ] cable
yeah now i get you. no you dont need the box to be connected to the dish while flashing but you will need a RS232 null modem cable to flash the box as using the lan network port with dreamup can be very buggy and cause more problems for you if the flash does not complete.
hi wen ever i try to install dreamup on my laptop it says com port not found need help. im connecting it wid rs232 cable
silverfox0786
11-10-11, 17:27
you need to allocate a com port to it
look in device manager and look at comport then set that com port to dreamup
trying to connect my dm500s wid rs232 cable but weneva i try to install dreamup on my xp its shows com port not found error need help guys
silverfox0786
11-10-11, 17:52
looks like you dont have com drivers installed
you either need a direct com port or comm to usb and drivers need to be installed for dreamup to recognise and continue install
i got rs 232 to usb cable. i need drivers for it to make dreamup work can u plzz show me a way for it
silverfox0786
11-10-11, 18:13
there is a driver cd that comes with the adaptor you need to load that
bassethound
11-10-11, 18:14
try these drivers USB to Serial 9-Pin Male Adaptor
silverfox0786
11-10-11, 18:16
is that prolific drivers basset as all usb have different chips in em
here is my ones for prolific
even after installing dis all drivers it dosnt regocnise it. dont know wat to do now
dream up can be a pest trying to get it to work, you need an rs 232, not a usb to rs232, as this is very very hard to get woking, a laptop with the rs232 output is ideal, then disable firewall, disable your anti virus, come off the internet, and go laptop to box only, if you use a laptop with the rs232 output dream up will come up with the com port for you, and this is usualy com 3, but it could also be com port 1, i would also recommend dream up version 1.3.2.1 as ive had it working a few time now....
im using xp so is dat the reason its working ?? wat do i need now to make dreamup n dreambox wrk
do you have a laptop with a rs323 output, as this will help a lot m8, usb to rs232 using dream up is very very had to catch, i have used a rs323 cable only with dream up a few times, and it is very easy to catch dream up this way ?? compared with using usb to rs323 cable,
naa i dont hav rs323 port on my laptop is der any oder way to connect it wid my laptop
I have never had dream up working with a usb to rs232 cable, so i bought an older laptop with a rs output, and dream up has worked every time m8, mostly with com port 3, or com port 1...
You could try DCC software m8
silverfox0786
11-10-11, 21:31
i got a usb to rs232 and so has basset we both have it working ok
you just need to make sure drivers are installed and its plugged in during installation of dreamup
is der anyoder way to connect dreambox wid my latop ? wat u say abt null modem cable or any oder way to connect it
silverfox0786
11-10-11, 21:43
you can try network install but not sure how it works
or try this method
http://www.world-of-satellite.com/showthread.php?11224-How-to-flash-a-E1-Based-DMM-Via-TELNET
also here is a noob setup guide
http://www.world-of-satellite.com/showthread.php?11225-Dreambox-500-for-noobies
my dreamup is working but wen i click on connect it says switch on ur dreambox n after den it dosnt connect y is dat need help again guys thxs
try a different com port m8....
it only give me com1 dats all
then there may be something esle stopping it, ive had that a lot, and usually there is something else on the computer stopping it from connecting to your box, disable firewall & anti virus and try again
even after switching my firewall n antivirus off it keeps saying swtich on ur dreambox need help guys
i hav got connected wid dreambox control center wid dream box now i dont know how to add my image file on dream box can anyone guide me plzz thxs
you must have an image on your comuter m8,[ if youve not got one you will need one on your computer ] so as you load it on to DCC and upload it to your box....??
i got dat image on my computer but i dont know where do i need to transfer dat image on dreambox
You've posted this on the DM500 and its difficult to flash. it can be done but you need to follow these instructions to the letter, if you are unsure use one of the cable methods.
Telnet Commands
To flash an image using Telnet
This method will only work with a .img image file.
Rename the image file to backup.img
FTP the image file to the /tmp folder on the dreambox
Telnet to your box and paste the following command:
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
To telnet, click START > RUN and type Telnet ip.address.of.dreambox
A command window will appear, enter username root and password dreambox.
To backup an image using Telnet
Telnet to the box and paste the following command:
cat /dev/mtd/3 > /tmp/backup.img
FTP to the box and navigate to the /tmp
Here you will find the backup.img file.
I would try the backup method first to make sure you done it right and as a test before you actually try to flash.
im trying to type the command it says file not found11808 help me plzz
ok i did the backup thing i can c backup file on my ftp now so wat do i do now can anyone guide me plzz
basilyoung
14-10-11, 21:45
Rename the image file to backup.img
as per the post you copied the backup image
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
so the image you want to transferr, needs to be renamed to "backup.img" THEN TRANSFERR IT TO TEMP
and use the telnet command
how can i add sky free few channels on my dm500s thxs
silverfox0786
14-10-11, 22:48
just add this channel setting to it you will be fine using dbedit
http://www.world-of-satellite.com/showthread.php?4023-Silverfox0786-28.2E-Enigma-I-SD-Settings-and-Picons
where do i add this file m8. im new to dis can u xplain me where to add this file by ftp plzz
you ftp your service/ bouquet file into..... var/tuxbox/config/enigma, then you can use dreamboxedit to re-adjust them to your own settings... not sure what folder you would put the picons in, has i never had them in my last enigma1 box m8 !!... but it could be var/picons... but like i said... im not sure m8
my box only gets freeview i wanna get asian channels guys. n all uk freeview channels works on astra only i get hotbird but nothing comeup on it guys need help i wanna add jade3 can u help me out plzz
silverfox0786
16-10-11, 14:08
freeveiw is fine
for asian you need to supscribe to viewasia, and zee packages
but yoiu have to be an exsisiting sky sub to get it or atleast have a FTV card for them to send signal to
once thats done plug in card to dmm and away you go
if i dont wanna subscribe viewasia wat do i need to do to watch dem
if i dont wanna subscribe viewasia wat do i need to do to watch dem
Use Google because we will not show you haw to pirate the channels on this forum.
atleast somoene can tell me lol wat to google or wat site to go thxs
silverfox0786
16-10-11, 14:42
read the rules
if i dont wanna subscribe viewasia wat do i need to do to watch dem
Have a read of the forum rules, all the info is there:thumbsup::rolleyes:
FATAL ERROR
couldn't load RC Mapping file for dm5xxx
PLEASE HELP ME
FATAL ERROR
couldn't load RC Mapping file for dm5xxx
PLEASE HELP ME
first you should make your own thread for this problem rather than adding it to a existing one otherwise it may get over looked and you may not get the help you need.
also we need you to provide as much information as possible about the receiver and image you were using, and exactly what you did that led up to you seeing this error.
the more details you can provide the better the chance you will have at getting a solution.
i have got this box i have no idea what is the image box name dm500s cccam i thing image name darknight
as i said create your own thread rather than attaching your's to this one. and how did you come to see this error ? also bear in mind that if you just bought this receiver is is very likely it is a cloned unit as Dream Multimedia ceased production of the DM500s around 6 to 7 years ago.
YESTERDAY I INSTALL CCCAM 2.2 after that this problem start, this message show in start up. and after that i cant do any thing box stuck in startup
as i said create your own thread rather than attaching your's to this one. and how did you come to see this error ? also bear in mind that if you just bought this receiver is is very likely it is a cloned unit as Dream Multimedia ceased production of the DM500s around 6 to 7 years ago.
i have no idea how can creat my own thread.
sorry for that.
Create your own thread for this please.
go here
http://www.world-of-satellite.com/forumdisplay.php?44-Dreambox-DM500
then click on the big Create New Thread button.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.