View Full Version : USB Stick Terrestrial A867
I've got a usb stickk A867 for terrestrial channels.
Which software do I need to use it on Vu+solo2 Vix Image?
Thks.
Any help/info on this subject please? Thks.
Hi there. For instruction on how to install on VIX go here
http://www.world-of-satellite.com/showpost.php?p=137507
But be warned I've encountered issues by using the A867. As reported here:
http://www.world-of-satellite.com/showpost.php?p=173008
So please let us know how it goes for you
Thanks very much for your reply. Will try it later on this week as I,m away atm.
The A867 does not work even on ET6500 with the last VIX ...
What to do?
The A867 does not work even on ET6500 with the last VIX ...
What to do?
just have a look at the first link I posted in this very thread at #3.
Thanks for the reply, but I solved by changing in lib/firmware the file dvb-usb-af9035-01.fw with the file dvb-usb-af9035-02.fw.
If you allow me I put it online.
Thanks for the reply, but I solved by changing in lib/firmware the file dvb-usb-af9035-01.fw with the file dvb-usb-af9035-02.fw.
If you allow me I put it online.
Interesting, where did you find that firmware version? I'm wondering if that could be used on Vu+ receiver too.
So lemme try to understand: you installed the dvb-usb-af9035-01.fw from feed and then manually replaced it with the 02 version? Is that rite?
Just make a little test: If you restart enigma2 does the DVBT tuner still work?
Yes, it is ...
Now the A867 works
So please share here the 02 I'll test on my duo
If you allow me I put it online.
If it's not already in the feeds, please do & also let us know where you got it from so the feeds can be updated.
OK..
http://bayfiles.com/file/CTyf/doH1DA/dvb-usb-af9035-02.fw
I tested it on Xtrend ET6500.....
when "replacing" did you just remove the 01 and put the 02. Or did you then rename the 02 to match 01?
not working for me on DUO.
I did install from the plugin's feed dvb-usb-af9035-01.fw
Removed the dvb-usb-af9035-01.fw from lib/firmware and uploaded the dvb-usb-af9035-02.fw you provided. Changed permission to 644 and tryed both leaving the name as is and changing it to match dvb-usb-af9035-01.fw.
Everytime I rebooted but the tuner was not showed.
And here's the terminal report:
dmesg | grep dvb
dvb_bcm7335: module license 'Proprietary' taints kernel.
lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 05e3:0608
Bus 001 Device 004: ID 07ca:a867
lsmod
Module Size Used by
ipv6 346460 12
brcmfb 1127 2
dvb_bcm7335 4943401 32 brcmfb
procmk 1397 1 dvb_bcm7335
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.