View Full Version : Keep Getting Tune Failed
On Tuesday night i was watching tv via 28e on my Twin and all the channels were fine. Then last night the same channels wouldn't open and kept saying Tune Failed with the signal as 0%. I have checked the frequency on Kingofsat to see if it has moved and it hasn't. Is there a reason why i am getting Tune Failed? Is it my LNB?
Help appreciated thanks
Rob van der Does
14-11-13, 11:50
'Tune failed' means literally that the tuner can't tune to the service. This can be due to a problem in any part of the chain you're using (LNB/F-connectors-COAX (water??)/switch/tuner).
Or you need to do a rescan. You get the error if channel has moved from its original frequency as well.
Or you need to do a rescan. You get the error if channel has moved from its original frequency as well.
but the channels work on and off so it cant be the frequencies
but the channels work on and off so it cant be the frequencies
Check if your dish is not being affected by wind. This does happen
Rob van der Does
14-11-13, 15:47
Or you need to do a rescan. You get the error if channel has moved from its original frequency as well.
True.
but the channels work on and off so it cant be the frequencies
So that indeed suggests an issue with your hardware components.
My solo2 recently has being saying this when I start up the box, quickly finds the channel though
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.