S
sharky
Guest
Hi, hope someone can help....tried alsorts,but everytime i try to connect DCC it keeps saying Telnet disconnected
Any help would be much appreciated
Any help would be much appreciated
Superb quality and spec AB-Com PULSe 4K SE only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...
[VU+ Uno] Dreambox Control Center, Dreambox Login Failed, FTP Connected, Telnet Disconnected
Despite what it says on the bottom line the red line to your box indicates you are not connected to it - so no FTP and no Telnet. First thing to note is that you probably have the old E1 version of DCC - the correct version will show Dreambox Control Center E2 at the top.
Once you get the correct DCC version check again. If still get an error - possible faults are wrong password, wrong box IP or no connection to box.
Note: now that I have posted you might get a lot of boring replies saying don't use DCC - please ignore them. If you have the correct password & connections DCC will easily connect to your Uno.
Once you get the correct DCC version check again. If still get an error - possible faults are wrong password, wrong box IP or no connection to box.
Note: now that I have posted you might get a lot of boring replies saying don't use DCC - please ignore them. If you have the correct password & connections DCC will easily connect to your Uno.
S
sharky
Guest
Hi,thanks for the post....i have downloaded again to make sure i am using correct version of DCC....but it is still showing the same
IAmATeaf
New member
What os are you running, it's worth checking that if you have a firewall running that you've allowed dcc access to the network.
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk
to add info here...
sharky brought his uno to my house today.
we put zeus 22 on it, connected to my network perfectly and box performs as it should.
box i.d and password are as default.
his box i.p is correct as shown in pic above.
i can't vouch for his internet connection (whether it's wired or not) maybe he will check and report back.
at his home he is using DCC 2.96 the same as i am at home.
DCC is ticked as an exception in windows firewall on his computer.
sharky brought his uno to my house today.
we put zeus 22 on it, connected to my network perfectly and box performs as it should.
box i.d and password are as default.
his box i.p is correct as shown in pic above.
i can't vouch for his internet connection (whether it's wired or not) maybe he will check and report back.
at his home he is using DCC 2.96 the same as i am at home.
DCC is ticked as an exception in windows firewall on his computer.
W
weirskynet
Guest
The password won't be dreambox
Tell him to try
Admin
Then vuplus for password with all correct IP address filed out
Sent from my iPhone using Tapatalk
Weirskynet
Living in harmony with his ,
Vu+ Solo2 ,
Tell him to try
Admin
Then vuplus for password with all correct IP address filed out
Sent from my iPhone using Tapatalk
Weirskynet
Living in harmony with his ,
Vu+ Solo2 ,
when his box was at my house DCC connected to the receiver just fine using root and dreambox.
why would it be any different when he takes it home?
W
weirskynet
Guest
Just from using both a dreambox and now a solo2 I noticed the dreambox password was dreambox
And vuplus ones are standard vuplus
Tell him to try it
Sent from my iPhone using Tapatalk
Weirskynet
Living in harmony with his ,
Vu+ Solo2 ,
And vuplus ones are standard vuplus
Tell him to try it
Sent from my iPhone using Tapatalk
Weirskynet
Living in harmony with his ,
Vu+ Solo2 ,
IAmATeaf
New member
If using w8.1 then delete the irewall exception and then run dcc so that it prompts again.
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk
S
sharky
Guest
tried everything suggested up to now ...but still no joy.
this is the message i get
this is the message i get
Ignoring this 'boring' reply, maybe try a proper FTP client?
Filezilla never seems to fail.
Code:
https://filezilla-project.org/
stick50jr
ViX Beta Tester ,
DCC 2.96 is for Enigma1 (25/5/2009)... the latest version for Enigma2 is DCC-E2 v1.5 (1/7/2012)
This link is from the developers web site... best place to get the program IMO.
However, your problem may be settings in DCC (Enigma2 uses different settings/directories to Enigma1). At your place, if you've just installed DCC 2.96 then the default settings will be Enigma1. At your friends place (who is also on DCC 2.96) he has probably changed the settings to suit Enigma2. Just install DCC-E2 and the settings should be correct by default. To change the defaults click on 'Experts' (left hand side, among the list of Configuration options).
I'm using DCC-E2 v1.5 and I also use Filezillla 3.8 and also Microsoft Telnet Client for Windows (in may case Windows 7). All work well. DCC-E2 is a friendly gui and does simlinks whereas Filezilla is generally more powerful/faster but doesn't seem to handle simlinks properly. The Telnet Client allows you to test telnet independently from these bells & whistles programs.
On my Vu+ Duo, the default telnet username & password is 'root' & ''
That is username = root and no password at all.
Hope this helps.
This link is from the developers web site... best place to get the program IMO.
However, your problem may be settings in DCC (Enigma2 uses different settings/directories to Enigma1). At your place, if you've just installed DCC 2.96 then the default settings will be Enigma1. At your friends place (who is also on DCC 2.96) he has probably changed the settings to suit Enigma2. Just install DCC-E2 and the settings should be correct by default. To change the defaults click on 'Experts' (left hand side, among the list of Configuration options).
I'm using DCC-E2 v1.5 and I also use Filezillla 3.8 and also Microsoft Telnet Client for Windows (in may case Windows 7). All work well. DCC-E2 is a friendly gui and does simlinks whereas Filezilla is generally more powerful/faster but doesn't seem to handle simlinks properly. The Telnet Client allows you to test telnet independently from these bells & whistles programs.
On my Vu+ Duo, the default telnet username & password is 'root' & ''
That is username = root and no password at all.
Hope this helps.
Last edited:
Rob van der Does
ViX Beta Tester
I'm also using DCC-E2 v1.5 and Filezillla 3.8: they both work fine for all my boxes.
IAmATeaf
New member
To me that message does look like a firewall problem, can you try disabling it and maybe even your av and try again?
stick50jr
ViX Beta Tester ,
Yes, I meant to say that Windows 7 requires that DCC be added to the Firewall exceptions (or disable the Firewall). So this suggesstion should certainly be taken up.
S
sharky
Guest
Hi...downloaded the most recent DCC..but still having the same problem.
However I'm now getting a few of my channels, but i'm still unable to get them all. Some i get don't seemed to be tuned properly.
However I'm now getting a few of my channels, but i'm still unable to get them all. Some i get don't seemed to be tuned properly.
stick50jr
ViX Beta Tester ,
But you have not confirmed whether you are using DCC v2.96 (latest for E1) or DCC-E2 v1.5 (latest for E2)... nor have you confirmed that you've disabled the firewall for DCC...
Whether your channels are tuning or not is a whole new discussion area...
i can confirm he used DCC-E2 v1.5 and disabled firewall for DCC