Wild Bill
04-08-14, 14:52
Hi, this is my first posting so I hope it is okay. I've already tried to search for a solution but so far haven't found anything completely similar.
I have just upgraded my Vu+ Ultimo from ViX 3.0 build 808 to Apollo build 023. As I could not restore a settings backup file, I first grabbed screen shots of the old menu settings and the major ones I have now set as they had been, either with the Setup Wizard or by going into the menus afterwards. My three tuners are now setup exactly as they were before and all are the same: DiSEqC A/B for 28.2E and 19.2E. I have attached two current screenshots:
36435 36434
In the past, I could select from the 19.2E providers as well as FreeSat and Sky for 28.2E, and I used AustriaSat Astra 1 for 19.2E. After the upgrade however, I only can see the 28.2E providers. I can tune to 19.2E channels with no problem. I have put some BBC and German channels in my Favourites bouquet to prove the DiSEqC switch is working properly and can smoothly switch between these using the CH +/- button on the remote.
36436
I've also seen that this problem can be a result of poor signal quality/misaligned dish, but the signal strength on all the 19.2E channels I have tried are all between 95%-100%. I cannot find any other settings to instruct ABM look for any particular providers or providers for a particular satellite. I see in the v1.1 manual that "ABM will only present you with setup options that are compatible with the tuner configuration of your STB."
Could someone please explain where I am going wrong? Thanks very much.
I have just upgraded my Vu+ Ultimo from ViX 3.0 build 808 to Apollo build 023. As I could not restore a settings backup file, I first grabbed screen shots of the old menu settings and the major ones I have now set as they had been, either with the Setup Wizard or by going into the menus afterwards. My three tuners are now setup exactly as they were before and all are the same: DiSEqC A/B for 28.2E and 19.2E. I have attached two current screenshots:
36435 36434
In the past, I could select from the 19.2E providers as well as FreeSat and Sky for 28.2E, and I used AustriaSat Astra 1 for 19.2E. After the upgrade however, I only can see the 28.2E providers. I can tune to 19.2E channels with no problem. I have put some BBC and German channels in my Favourites bouquet to prove the DiSEqC switch is working properly and can smoothly switch between these using the CH +/- button on the remote.
36436
I've also seen that this problem can be a result of poor signal quality/misaligned dish, but the signal strength on all the 19.2E channels I have tried are all between 95%-100%. I cannot find any other settings to instruct ABM look for any particular providers or providers for a particular satellite. I see in the v1.1 manual that "ABM will only present you with setup options that are compatible with the tuner configuration of your STB."
Could someone please explain where I am going wrong? Thanks very much.