Sicilian
24-10-14, 15:36
Flashing the Receiver.
1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
3. Open the folder you extracted to your desktop, in this case named openvix-Apollo.064-xpeedlx_usb, you will see another folder named xpeedlx, this is your image file. Copy the entire xpeedlx folder directly to the USB stick
4. Fully power the receiver down via the rear rocker switch.
5. Make sure no USB devices are plugged into the receiver at this point.
6. Insert the USB stick containing the image files into one of the USB ports on the receiver.
7. Power the receiver on.
8. When the receiver powers up you will see the message “press arrow UP to upgrade” on the receivers display. Press the '+' button now on front panel.
9. During the flashing process you should see the message “upgrading” on the receivers, DO NOT power the receiver down during this process.
10. If successful the receiver will reboot it self after the flashing process has completed.
1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
3. Open the folder you extracted to your desktop, in this case named openvix-Apollo.064-xpeedlx_usb, you will see another folder named xpeedlx, this is your image file. Copy the entire xpeedlx folder directly to the USB stick
4. Fully power the receiver down via the rear rocker switch.
5. Make sure no USB devices are plugged into the receiver at this point.
6. Insert the USB stick containing the image files into one of the USB ports on the receiver.
7. Power the receiver on.
8. When the receiver powers up you will see the message “press arrow UP to upgrade” on the receivers display. Press the '+' button now on front panel.
9. During the flashing process you should see the message “upgrading” on the receivers, DO NOT power the receiver down during this process.
10. If successful the receiver will reboot it self after the flashing process has completed.