View Full Version : virgin & your area in autobouqetmaker
virgin autobouqetmaker never used one of these before I down loaded the virgin channels with the nano t3 do I use it like the D B E to put channels in order wear do I find it please
abu baniaz
11-01-15, 22:16
ABM works. Try it.
iv found the virgin autobouqetmaker in the vix image it dosent work iv had to do a automatic scan and that working wear do I get the abm from please
abu baniaz
11-01-15, 22:45
ABM = AutoBouquetsMaker
What settings are you using for the provider details?
Are you sure you have used the correct NetID?
Can you explain a bit more by "not working"
im ussig virgin cable uk 6952 auto scan brought 529 channels up abm says time out in a few seconds
abu baniaz
11-01-15, 23:04
ABM will not work if you have told it to use the wrong NetID.
i no it sounds daft it will not let me put the numbers in
abu baniaz
11-01-15, 23:21
Scroll left/right until you get to your one.
all it says time out tunner lock no Keighley or Bradford code is 6952
abu baniaz
11-01-15, 23:38
Tuner lock normally means wrong netID is being used. Are you sure you have the right one?
yes auto tunner works fine it says westyorkshire 01 virgin uk in the menu
abu baniaz
11-01-15, 23:57
I don't know what you mean by auto tuner. You can use any NetID for a normal E2 scan, it will find the channels.
For ABM and AutoBouquets cable, you must use the correct NetID (unless you are in a pure area). You must find out what your NetID is. Best way is by checking engineers menu of your offical receiver.
Bradford westyorkshire 40961 Keighley westyorkshire 40961 there both right
abu baniaz
12-01-15, 00:06
What setting are you using in ABM? (You said it is using 00001 West Yorkshire above. You have to change it)
Did you save after selecting your region?
Tuner type DVB-C
Confuration mode enabled
Network ID 00000
Used service scan type Provider
Provider to scan Virgin Media UK (40961
please could explain how u would set it up ill give it another go regards simon
abu baniaz
12-01-15, 00:36
In your above post, you have described tuner configuration. That is fine, leave it as it is.
You must tell ABM what Net ID to use. Look at this screenshot, move down to area, keep pressing left until you get to 40961 (don't worry about name). Once you have selected 40961, press green for OK, This saves your settings.
Once you have told ABM what NetID to use, you can then scan using ABM.
Best way is by checking engineers menu of your offical receiver.
Or checking with your neighbours if you don't have one.
DaMacFunkin
12-01-15, 13:45
... but you should have one unless you intend to only watch the 4 unencrypted channels...
Hi abu,
i have the tm nano 3t and trying to access autobouquets for VM. it doesnt give me the option for vM provider as per your earlier screenshot. any ideas what i need to do?
i'm on openpli image
abu baniaz
01-02-15, 20:22
Have you changed tuner to Cable instead of Terrestrial?
Yes i have. ive set tuner configuration to as per previous but set to 40160 which is for GM area
running a service scan and that is picking up channels, 109 so far after 31%
Yes i have. ive set tuner configuration to as per previous but set to 40160 which is for GM area
Manchester 1 is 41060
Sorry mate, you are right. ive changed it to manchester 1 as per your post.
however it did pick up 600 channels on 40160.
So still can't get autobouquets to pick up VM
abu baniaz
01-02-15, 21:01
GM = Greater Manchester
abu baniaz
01-02-15, 21:32
Just checked the 28/1/2015 4D (Based on OpenPLI) image. The ABM in that image although not most recent, it does have Cable as well as HD Terrestrial for the few regions people have provided data.
Which image are you on?
Menu > Information > About
abu baniaz
01-02-15, 22:12
@Melodious, you have an old image. Flash latest 4D image or latest Openvix image.
4D images
http://www.downloadtmsw.com/bbs/main.php
Openvix images
http://openvix.co.uk/
is there any guides to installing the openpli image?
abu baniaz
01-02-15, 22:52
is there any guides to installing the openpli image?
http://www.world-of-satellite.com/showthread.php?38693-How-to-flash-Technomate-TM-Nano-2-Super
Apart from image name, same as above
ok going to give it a try now. cheers mate
do we have on site a list of cable netids for people to use? or can one be posted if allowed:D
Rights its done managed to do the autobouquets. Cheers for that.
Another question, i'm trying to setup mgcam, i assume i can download these from plugins? does the mc_cfg file have to have special settings?
abu baniaz
02-02-15, 00:10
You can download the cam from plugins, but you have to provide your own config files. They have been posted on forum.
@Cactikid, all headend NetIDs are listed in ABM. We have not listed the individual towns/boroughs. Pretty sure somone posted them already.
ok as have a net id list lol
abu baniaz
02-02-15, 00:30
ok as have a net id list lol
Post it in here http://www.world-of-satellite.com/showthread.php?38120-Logs-for-Pure-area-required&highlight=pure+logs
yes just done hope its ok lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.