xixas86
25-05-15, 15:21
Hello,
This step by step tutorial, will help in How to remove RF unit from WeTek.
VERY IMPORTANT!!!!
This tutorial it's to help some user's that have 2 or more WeTek at home.
Beware of any damage you might do in your WeTek.
Follow the tutorial at your own risk!
If any component is damage, we won't take any responsability!
First of all, plug off every cable/microSD/HDD you have connected on your WeTek.
For this tutorial you need
1 Screwdriver like the image below
http://s17.postimg.org/jzjwj7q3z/screw.png
If you have a tuner plugged, unplugged like the image
http://s4.postimg.org/xjsehnt4d/20150402_144527.jpg
http://s16.postimg.org/w2u4tqsat/20150402_144547.jpg
Now, we need to remove this 4 rubber's and underneath it, the screw's as well
Don't forget the screw in the middle
http://s16.postimg.org/5rz4hj4jp/20150402_144404.jpg
http://s4.postimg.org/xet8lqb71/20150402_144614.jpg
now, remove the 4 screw's
http://s4.postimg.org/4mmh293jh/20150402_144654.jpg
Now, we're going to open WeTek case, as i said before USE AT YOUR OWN RISK
Please see the pictures first, then try to open WeTek!
Very carefully push the case off
http://s4.postimg.org/osldne9t9/20150402_144732.jpg
At the back
http://s4.postimg.org/v01d1auy5/20150402_144941.jpg
In the front
http://s4.postimg.org/a6yycw2el/20150402_145003.jpg
After opening the case, beware with the Wifi adaptor (image below)
http://s4.postimg.org/lx8agj5t9/20150402_144750.jpg
Now, let's remove the RF Unit from WeTek
In the image below, you have to "tokens" plugged.
One black, other red.
http://s4.postimg.org/qcvazj7l9/20150402_144800.jpg
Plug out the black one like the image below
http://s4.postimg.org/ym76dy1bh/20150402_144809.jpg
http://s4.postimg.org/6omygi1il/20150402_144815.jpg
Do not unplug this Red Token, you can damage your WeTek!
Just check out if the token is well plugged like the image below
http://s4.postimg.org/k1q3j46ct/20150402_144821.jpg
And it's done
This step by step tutorial, will help in How to remove RF unit from WeTek.
VERY IMPORTANT!!!!
This tutorial it's to help some user's that have 2 or more WeTek at home.
Beware of any damage you might do in your WeTek.
Follow the tutorial at your own risk!
If any component is damage, we won't take any responsability!
First of all, plug off every cable/microSD/HDD you have connected on your WeTek.
For this tutorial you need
1 Screwdriver like the image below
http://s17.postimg.org/jzjwj7q3z/screw.png
If you have a tuner plugged, unplugged like the image
http://s4.postimg.org/xjsehnt4d/20150402_144527.jpg
http://s16.postimg.org/w2u4tqsat/20150402_144547.jpg
Now, we need to remove this 4 rubber's and underneath it, the screw's as well
Don't forget the screw in the middle
http://s16.postimg.org/5rz4hj4jp/20150402_144404.jpg
http://s4.postimg.org/xet8lqb71/20150402_144614.jpg
now, remove the 4 screw's
http://s4.postimg.org/4mmh293jh/20150402_144654.jpg
Now, we're going to open WeTek case, as i said before USE AT YOUR OWN RISK
Please see the pictures first, then try to open WeTek!
Very carefully push the case off
http://s4.postimg.org/osldne9t9/20150402_144732.jpg
At the back
http://s4.postimg.org/v01d1auy5/20150402_144941.jpg
In the front
http://s4.postimg.org/a6yycw2el/20150402_145003.jpg
After opening the case, beware with the Wifi adaptor (image below)
http://s4.postimg.org/lx8agj5t9/20150402_144750.jpg
Now, let's remove the RF Unit from WeTek
In the image below, you have to "tokens" plugged.
One black, other red.
http://s4.postimg.org/qcvazj7l9/20150402_144800.jpg
Plug out the black one like the image below
http://s4.postimg.org/ym76dy1bh/20150402_144809.jpg
http://s4.postimg.org/6omygi1il/20150402_144815.jpg
Do not unplug this Red Token, you can damage your WeTek!
Just check out if the token is well plugged like the image below
http://s4.postimg.org/k1q3j46ct/20150402_144821.jpg
And it's done