View Full Version : tuner arrangement
I received my ET10000 the other day, today I connected it up to my system, the receiver as 2 dvbs2 tuners and 2 hybrid tuner, hybrid tuner are in A and B sat tuners are in C and D, when setting up receiver up it does not find tuner D, can anyone shed any light on this
What tuners are you seeing? Two hybrid tuners and 1x Satellite tuner?
Try power off.
Swap the two satellite tuners around, could be one needs re-seating.
If all four still not visible, unplug all tuners and plug in both sat only in slots A & B, see if they're both visible.
If they are, plug in one Hybrid tuner at a time in slots C & D. Booting each time you add a tuner, to ensure visible.
Ensure power is disconnect whilst removing or plugin in tuners.
I have changed tuner position of C and D and are all working, must have seating problem
Tuner D as gone missing again, receiver seeing tuner A and B which are hybrid and C is sat tuner D is not being shown, should I try sat tuners in A and B and hybrids in C and D
I have hybrid cable tuner in a,b,c and sat in d all works great i had sat in slot a but was having recording problems since switching tuners around all is good, but the small box i got the tuner in says sat in slot d can cause cam problems but the way i have it all 4 tuners record with no problems
I received my ET10000 on Wednesday from sponsor with 2 sat and hybrid tuners installed, A and B are hybrid C and D are sat, from the start tuner D does not show, changed tuner D placed in slot C and D in slot C that worked, but now on Saturday night tuner D is not showing again, has anyone got any ideas should I contact sponsor
abu baniaz
06-09-15, 11:03
Is it the same module giving issues or same slot?
no I moved them around from C to D and D to C
forgot to mention tuners have separate feeds, should not make any difference
The manual states this if it helps
WARNING: DO NOT USE FOLLOWING COMBINATION:
Tuner 1 : any tuner
Tuner 2 : any tuner
Tuner 3 : DVB-S2 tuner
Tuner 4 : DVB-C tuner
or
Tuner 1 : any tuner
Tuner 2 : any tuner
Tuner 3 : DVB-C
Tuner 4 : DVB-C
Any other combination is supported.
WOS supplied with tuner 1 and 2 with hybrid and tuner 3 and 4 with sat, I have seen that in the manual
abu baniaz
06-09-15, 12:58
no I moved them around from C to D and D to C
You cannot move the slots along, you can only move the tuners along. Which of the following statements is correct?
The same tuner fails whichever slot you put it in.
Whichever tuner module you put in a slot, you have issues with that tuner slot.
You cannot move the slots along, you can only move the tuners along. Which of the following statements is correct?
The same tuner fails whichever slot you put it in.
Whichever tuner module you put in a slot, you have issues with that tuner slot.
sorry I meant tuner C went in slot D and tuner D went in slot C
abu baniaz
06-09-15, 13:14
So what is at fault, the tuner module (the tuner cards you can take out and move along) or tuner slot (the holes on the circuit board)?
abu baniaz
06-09-15, 13:37
Label your tuners as H1, H2, S1 and S2. (H for hybrid, S for satellite).
For example,
if H1 fails whether you put it in Tuner Slot A, Tuner slot B, Tuner Slot C or Tuner Slot D, we can conclude there is a problem with Tuner module H1.
On the other hand,
if you put H1, H2, S1, or S2 in Tuner Slot C, and you always havea problem with it in Slot C, we can establish there is an issue with the slot/arrangement.
tomorrow I will be trying different permutations for the tuners
I think I have a faulty sat tuner, in every slot it shows no signal
Sounds to me like the slot for tuner D might be the problem as that is the slot that the tuner us in which works and the disappears as the OP has mentioned above.
Sent from my GT-I9505 using Tapatalk
I have tried in all slots today, still no joy
abu baniaz
07-09-15, 21:31
I have tried in all slots today, still no joy
All tuner modules fail in all tuner slots now?
no just 1 sat tuner module is failing, hybrid tuners and other sat all are working fine, sponsors have asked to return the tuner
World of Satellite replaced tuner everything is working fine
how have you set them ie 2 x dvb= a b, then hybrid = c d??
I have slots A and C with DVB-C and C and D with DVB-S. Originally had DVB-S in slots A and B but this caused issues when recording 2 cable channels at the same time.
?? do you mean A and B and C and D? ie B is missing from above!
1554leslie
30-11-16, 20:27
I had a similar problem with my et 8500 and turned out to be a faulty tuner
For anybody else, I went with A = DVB, B= HYBRID C/T, C= HYBRID C/T, D= DVB all working perfectly.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.