View Full Version : [VU+ Duo2] Cannot clear one channel.
sandiego69
13-11-15, 11:01
Strange problem. I have a legal card which I use with CCcam 2.3. One channel (SCT HQ) has been replaced by another (PassionXXX) with identical parameters. This channel is on Hotbird 11717 V. The weird thing is I still get all the other 11 channels on the card but only audio on the channel in question.
If I use Webif and stream to my PC the video channel is cleared. I have rescanned numerous times and have no problems with any other channel from the same transponder. What I have noticed but may not be significant is when pressing OK twice I see on some channels the frequency is showing not 11717 but 14141. Strange!
I have a Duo2 with a twin DVB-S tuner. In other words two cables into the same tuner.
Please help.
sandiego69
14-11-15, 10:09
Nobody with any thoughts at all?
They might be introducing pairing/encryption - same as the Sky HD channels.
Have you tried the card in an official box.
sandiego69
14-11-15, 15:58
No as I don't use an official box. I rely on my trusty Duo2. As I said it is strange that if I Webif to my PC there is no problem and all clear. As far as I can also tell the transmission parameters/spec are exactly the same, so theoretically it was just a name change.
Strange problem. I have a legal card which I use with CCcam 2.3. One channel (SCT HQ) has been replaced by another (PassionXXX) with identical parameters. This channel is on Hotbird 11717 V. The weird thing is I still get all the other 11 channels on the card but only audio on the channel in question.
If I use Webif and stream to my PC the video channel is cleared. I have rescanned numerous times and have no problems with any other channel from the same transponder. What I have noticed but may not be significant is when pressing OK twice I see on some channels the frequency is showing not 11717 but 14141. Strange!
I have a Duo2 with a twin DVB-S tuner. In other words two cables into the same tuner.
Please help.
I have the same issue, seems strange :confused:
There is a similar problem with some other channels that can't be discussed here.
You probably need to edit your lamedb file for this particular channel. The lamedb file is in the /etc/ folder, you can search for the channel in there and try changing the parameters.
sandiego69
15-11-15, 12:32
Thanks. I did have a look in the lamedb but to be honest I don't really have a clue as to which parameters are correct or wrong.
The card supplier is not being much help. If you do find an answer please let me know. Thanks again.
I have exact same problem using Vu+ Duo and CCCam:confused::confused:
So how do I go about ascertaining what the parameters should be?
DaMacFunkin
16-11-15, 09:46
Good question I would like to know also.
Thank you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.