rassi
26-03-16, 07:26
I do seem to have network transfer speed issue with LX3. What kind of speeds others are getting with it?
LX3 over gbit network with NFS:
Results for write throughput:
97.612 Mbit/s with udp,async,wsize=8192
97.612 Mbit/s with tcp,async,wsize=8192
97.612 Mbit/s with tcp,async,wsize=32768
97.612 Mbit/s with tcp,async,wsize=16384
89.478 Mbit/s with udp,async,wsize=4096
89.478 Mbit/s with udp,async,wsize=16384
89.478 Mbit/s with tcp,async,wsize=4096
42.949 Mbit/s with udp,async,wsize=32768
Results for read throughput:
1073.741 Mbit/s with udp,async,rsize=8192
1073.741 Mbit/s with udp,async,rsize=32768
1073.741 Mbit/s with udp,async,rsize=16384
1073.741 Mbit/s with tcp,async,rsize=8192
1073.741 Mbit/s with tcp,async,rsize=4096
1073.741 Mbit/s with tcp,async,rsize=32768
1073.741 Mbit/s with tcp,async,rsize=16384
To the same server but with other machine, so server not limiting write throughput
Results for write throughput:
1073.741 Mbit/s with udp,async,wsize=32768
536.870 Mbit/s with udp,async,wsize=8192
357.913 Mbit/s with tcp,async,wsize=4096
Results for read throughput:
1073.741 Mbit/s with udp,async,rsize=32768
root@xpeedlx3:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 4
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: ags
Wake-on: d
SecureOn password: 00:00:00:00:00:00
Link detected: yes
LX3 over gbit network with NFS:
Results for write throughput:
97.612 Mbit/s with udp,async,wsize=8192
97.612 Mbit/s with tcp,async,wsize=8192
97.612 Mbit/s with tcp,async,wsize=32768
97.612 Mbit/s with tcp,async,wsize=16384
89.478 Mbit/s with udp,async,wsize=4096
89.478 Mbit/s with udp,async,wsize=16384
89.478 Mbit/s with tcp,async,wsize=4096
42.949 Mbit/s with udp,async,wsize=32768
Results for read throughput:
1073.741 Mbit/s with udp,async,rsize=8192
1073.741 Mbit/s with udp,async,rsize=32768
1073.741 Mbit/s with udp,async,rsize=16384
1073.741 Mbit/s with tcp,async,rsize=8192
1073.741 Mbit/s with tcp,async,rsize=4096
1073.741 Mbit/s with tcp,async,rsize=32768
1073.741 Mbit/s with tcp,async,rsize=16384
To the same server but with other machine, so server not limiting write throughput
Results for write throughput:
1073.741 Mbit/s with udp,async,wsize=32768
536.870 Mbit/s with udp,async,wsize=8192
357.913 Mbit/s with tcp,async,wsize=4096
Results for read throughput:
1073.741 Mbit/s with udp,async,rsize=32768
root@xpeedlx3:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 4
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: ags
Wake-on: d
SecureOn password: 00:00:00:00:00:00
Link detected: yes