View Full Version : Twin tuner setup satellite
How do I configure the 2 tuners? The manual mentions "simple", "equal to" and "loop-through" but i'm not sure which is the best setting.
I have twin satellite tuners and an internal HDD.
Please help
Andy_Hazza
04-08-16, 06:24
I would setup both tuners as; Advanced, 28.2 & LNB1.
Sent from my iPhone using Tapatalk
Rob van der Does
04-08-16, 07:33
That will depend on the LNB's you have and what satellite they are pointing to.
Normally one should make a setup so each tuner gets it's own feed; a loopthrough is also possible but gives serious limitations to the looped-through tuner.
It's the same satellite dish I used for Sky & Freesat.
Andy_Hazza
04-08-16, 11:47
It's the same satellite dish I used for Sky & Freesat.
My original post is what I would config your tuners to. So Advanced, 28.2 & LNB1 on both Tuner A & Tuner B.
Sent from my iPhone using Tapatalk
Rob van der Does
04-08-16, 12:23
It's the same satellite dish I used for Sky & Freesat.
Is that a twin-LNB (so two coax cables coming from it)?
Is that a twin-LNB (so two coax cables coming from it)?
Yes - 1 each to ports A & B.
Rob van der Does
04-08-16, 12:50
Well, then do as Andy says.
Thanks for your help, guys. :thumbsup:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.