View Full Version : No picture on TV whilst recording
The mini display is showing the channel details and is flashing "recording". There is no picture on the TV however.
I can get the picture once the recording has finished - I have twin satellite tuners and internal HDD.
Please help :confused:
This on a 8500? Sorry on my mobile. On both channels? You're definitely on Vix yes lol? There's an ATV similar issue just now
might be a 1 only supplied feed recordings take first priority over viewing ,other tuners not setup correctly if cables installed?
Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard
Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard
Both tuners set as
Simple
Single
28.2
Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard
I have "recordings always set have priority" set to Yes.
How can I make settings as standard?
not said how many tuners on box or wired up?
not said how many tuners on box or wired up?
Twin satellite tuners with coax to each. internal HDD
Guys on here always recommend standard options. I can't mind them off top of my head. Factory reset would but a bit much I know. Maybe cacti can confirm his.
Guys on here always recommend standard options. I can't mind them off top of my head. Factory reset would but a bit much I know. Maybe cacti can confirm his.
I don't think I've altered any settings but could be wrong.
no dont factory reset ,each tuner setup on 28.2? and using latest cams 1.38 or 2.30?
49413
like on C and D
What does the Lcd display show for channels?
White is in use, red recording.... Anot showing then its free tomuse.
no dont factory reset ,each tuner setup on 28.2? and using latest cams 1.38 or 2.30?
49413
like on C and D
My tuner setup looks exactly like your C and D above.
What does the Lcd display show for channels?
White is in use, red recording.... Anot showing then its free tomuse.
LCD is flashing "recording",' channel details (BBC 1 Olympics), and the letters A and B in red.
2 tuners in recording mode if both are in red,did you setup a timer or autotimer?
2 tuners in recording mode if both are in red,did you setup a timer or autotimer?
A and B are both in red.
Autotimer.
if you set a timer or autotimer for box to record on 2 channels on 2 tps you are not allowed to view any other channel,red button scroll down you will see list greyed out=no entry,others not greyed out can be viewed because there on same tp as channels recorded.
abu baniaz
08-08-16, 15:52
I'm guessing you are using CCcam. If so, you need version 2.30 in order to decode two or more channels simultaneously.
Sent from my XT1032 using Forum Fiend v1.3.3.
abu baniaz
08-08-16, 16:11
Please ignore, just saw that you are watching FTA channel.
Sent from my XT1032 using Forum Fiend v1.3.3.
if you set a timer or autotimer for box to record on 2 channels on 2 tps you are not allowed to view any other channel,red button scroll down you will see list greyed out=no entry,others not greyed out can be viewed because there on same tp as channels recorded.
I was recording 2 programmes at the same time :o
I've deleted 1 recording and now I can view on the other.
Sorry for the confusion.
no confusion at all on your new toy and wondered why a blank screen:eek:,remember you can view the recordings on hdd while your box records the other 2 channels.:thumbsup:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.