giub1981
27-01-17, 17:16
Hi
I have recently purchased a vu ultimo 4k and am having some issues setting up OSCAM. I do have it working but the picture freezes quite often and when I change channel, it can take up to 30 seconds before the channel clears (FTA channels are fine). I was previously using MGCAMD (on the ET10000) and had no issues at all. I can only think that it is my setting that are slightly wrong. This is for cable as dont use sat.
Here are my settings:
OSCAM CONF:
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 16001
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1
[reader]
label = slot0
description = freesat
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0963
fix07 = 0
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 3
emmcache = 1,3,15,0
dropbadcws = 1
ccchop = 1
auprovid = 000963
[reader]
label = slot1
description = tivusat
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 183D
boxkey = 3737373737373737
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
ecmwhitelist = 91
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
mhz = 450
cardmhz = 2700
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
dropbadcws = 1
ccchop = 1
auprovid = 00183D
OSCAM SERVER:
[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 1
[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 2
[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 3
OSCAM USER:
[account]
user = dvbapi
au = 1
group = 1,2,3
[account]
user = monitor
pwd = monitor
group = 1,2,3
oscam.srvid2: (NOT SURE IF THIS IS NEEDED)
# oscam.srvid2 generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11064 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.srvid2.txt
Would someone please be able to check these to see if there is anything obvious that I need to change/delete/add.
Thanks
I have recently purchased a vu ultimo 4k and am having some issues setting up OSCAM. I do have it working but the picture freezes quite often and when I change channel, it can take up to 30 seconds before the channel clears (FTA channels are fine). I was previously using MGCAMD (on the ET10000) and had no issues at all. I can only think that it is my setting that are slightly wrong. This is for cable as dont use sat.
Here are my settings:
OSCAM CONF:
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 16001
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1
[reader]
label = slot0
description = freesat
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0963
fix07 = 0
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 3
emmcache = 1,3,15,0
dropbadcws = 1
ccchop = 1
auprovid = 000963
[reader]
label = slot1
description = tivusat
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 183D
boxkey = 3737373737373737
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
ecmwhitelist = 91
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
mhz = 450
cardmhz = 2700
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
dropbadcws = 1
ccchop = 1
auprovid = 00183D
OSCAM SERVER:
[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 1
[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 2
[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 3
OSCAM USER:
[account]
user = dvbapi
au = 1
group = 1,2,3
[account]
user = monitor
pwd = monitor
group = 1,2,3
oscam.srvid2: (NOT SURE IF THIS IS NEEDED)
# oscam.srvid2 generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11064 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.srvid2.txt
Would someone please be able to check these to see if there is anything obvious that I need to change/delete/add.
Thanks