View Full Version : How to USB flash the Octagon SF8008
1) Download latest Enigma2 Image of your choice.
2) USB 2.0or 3.0 minimum 2 GB USB stick formatted with FAT32.
3) Unpack the image and copy BOTH the 'octagon' folder and the 'usb_update.bin' to root of the USB stick.
4) Turn off the box.
5) Plug the USB stick into the USB 3.0 port on the right side.
6) Press and hold the standby button and power on the box until "Updt" is displayed.
6) Select "Recovery From USB" from TV screen menu.
7) Box restarts when update is completed.
1) Download latest Enigma2 Image of your choice.
2) USB 2.0or 3.0 minimum 2 GB USB stick formatted with FAT32.
3) Unpack the image and copy BOTH the 'octagon' folder and the 'usb_update.bin' to root of the USB stick.
4) Turn off the box.
5) Plug the USB stick into the USB 3.0 port on the right side.
6) Press and hold the standby button and power on the box until "Updt" is displayed.
6) Select "Recovery From USB" from TV screen menu.
7) Box restarts when update is completed.
https://youtu.be/GC6FIdFXaFY
erased!................
world-of-satellite.co.uk
17-10-18, 06:58
PDF Guide, how to USB flash the Octagon SF8008.
Hello,
I just received an Octagon SF8008 to replace my old VuZero, but after I downloaded Openpli and Openvix, there is no octagon folder inside...
- In openvix-6.0.006.release-sf8008_recovery_emmc :
apploader.bin
fastboot.bin
bootargs.bin
imageversion
usb_update.bin
- In openpli-8.1-release-sf8008-20220109_usb :
apploader.bin
fastboot.bin
bootargs.bin
usb_update.bin
Any help please ? How should I flash it ?
Should I put everything in the usb key in the root folder ?
Thanks
ced
I would hold off doing anything as i think the recovery file is to fix a screwed up box ??
Were these files downloaded onto pc or online to box ?
Was there a previous image on box
Hello,
I just received an Octagon SF8008 to replace my old VuZero, but after I downloaded Openpli and Openvix, there is no octagon folder inside...
- In openvix-6.0.006.release-sf8008_recovery_emmc :
apploader.bin
fastboot.bin
bootargs.bin
imageversion
usb_update.bin
- In openpli-8.1-release-sf8008-20220109_usb :
apploader.bin
fastboot.bin
bootargs.bin
usb_update.bin
Any help please ? How should I flash it ?
Should I put everything in the usb key in the root folder ?
Thanks
ced
So what image is it flashed with currently teamblue??
So what image is it flashed with currently teamblue??
OpenATV is installed on it...
I downloaded the latest Openpli stable release "openpli-8.1-release-sf8008-20220109_usb.zip" from Openpli forum : https://openpli.org/download/octagon/SF8008/?
I would prefer to install Openpli as multiboot if possible.
It is OpenATV 6.4 but I can't configure my suptv account, it seem the plugin is not compatible with this image...
Plenty of outdated plugins are not supported on the newer images and maybe they will or wont be.
does anybody know if there is a newer SupTV plugin ? because to be honest this OpenATV image seem pretty good i have never see so much settings..
If not, how should i flash the receiver to Openpli Multiboot please (so I could keep OpenATV too) ?
Install which ever images multiboot zip on the hdd(NOT the recovery zip). In ATV long press blue button and from there you should find the flash online routines.
You should try the OpenViX image if you plan to keep posting here for help!! With OpenViX much of the original code is similar to OpenPLi, unlike OpenATV where they continuously re-write everything.
From OpenViX you can directly online flash, OpenPli, OpenATV, OpenBH and obviously OpenViX, nobody else is so transparent!
Install which ever images multiboot zip on the hdd(NOT the recovery zip). In ATV long press blue button and from there you should find the flash online routines.
You should try the OpenViX image if you plan to keep posting here for help!! With OpenViX much of the original code is similar to OpenPLi, unlike OpenATV where they continuously re-write everything.
From OpenViX you can directly online flash, OpenPli, OpenATV, OpenBH and obviously OpenViX, nobody else is so transparent!
Arf, Thankyou, i installed Openpli from "Flash online -> downloaded images -> Openpli on usb" and it worked, but sadly after SupTV still not working, i decided to boot from Openpli Menu in Recovery menu/mode, and now the box is stuck in recovery menu, i can't return to Openpli or OpenATV (which are installed on multiboot slots 3 and 4) ...
The recovery boot seem not working, i can't see nothing on the TV screen, on the front panel i can see "MECO or NECO" i don't know what this mean, and I can't exit this broken recovery mode, any help please ?
63197
Follow the guide in this thread: https://www.world-of-satellite.com/showthread.php?62747-How-to-USB-flash-New-Multi-boot-recovery-menu-and-Image-to-Octagon-SF8008-New-procedure-21-04-2020
The method for USB flashing changed some time ago
Arf, Thankyou, i installed Openpli from "Flash online -> downloaded images -> Openpli on usb" and it worked, but sadly after SupTV still not working, i decided to boot from Openpli Menu in Recovery menu/mode, and now the box is stuck in recovery menu, i can't return to Openpli or OpenATV (which are installed on multiboot slots 3 and 4) ...
The recovery boot seem not working, i can't see nothing on the TV screen, on the front panel i can see "MECO or NECO" i don't know what this mean, and I can't exit this broken recovery mode, any help please ?
63197
Talk to OpenPli…maybe they know how to get out of it
.... he already has, since yesterday :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.