View Full Version : OPENVIX TEAM: OpenViX 5.3 breaks Octagon SF4008!
*****URGENT TO THE OPENVIX TEAM*****
Please fix the image because if you try to flash it you block the SF4008 and it cannot boot!
https://www.openvix.co.uk/openvix-builds/sf4008/openvix-5.3.025.release-sf4008_usb.zip
Waiting for your help.
*****URGENT TO THE OPENVIX TEAM*****
Please fix the image because if you try to flash it you block the SF4008 and it cannot boot!
https://www.openvix.co.uk/openvix-builds/sf4008/openvix-5.3.025.release-sf4008_usb.zip
Waiting for your help.
Use an older image and without logs your report is useless.
Use an older image and without logs your report is useless.
How do I provide logs if the receiver won't boot?
The issue is with all OpenViX 5.3 versions.
I'm would imagine that someone would have reported this problem in the past 8 months since 5.3 was released.
abu baniaz
22-04-20, 14:48
Is it something to do with the new recovery menu?
Is it something to do with the new recovery menu?
Sf4008 hasn‘t changed in months
Have you renamed the noforce folder to force ??????
Is it something to do with the new recovery menu?
No, SF4008 does not have this.
I thought I'd bricked my SF4008 some time ago and the WoS support team sent me this recovery file.
It sorted it for me anyway.
I thought I'd bricked my SF4008 some time ago and the WoS support team sent me this recovery file.
It sorted it for me anyway.
Yes it works but the OpenViX team should check their bui
Yes it works but the OpenViX team should check their builds!
You should check how to install - this is a normal requirement for the sf4008 from the year dot and most people flash online with ViX ImageManager - much simpler
This update was required for all images from February 2018, nothing to do with the ViX Team.
You should check how to install - this is a normal requirement for the sf4008 from the year dot and most people flash online with ViX ImageManager - much simpler
I know how to install, since other images work, OpenViX doesn't.
Maybe you should ask for your money back
@a19a Until 3 weeks ago I used the SF4008 with the latest vix at the time with no problems whatsoever. I only changed the SF4008 because the remote control also controlled my Formuler Z8 and vice a versa , very annoying. Clearly you have problems,it may pay to explore other avenues than just vix. Good luck.
Andy_Hazza
22-04-20, 22:12
I know how to install, since other images work, OpenViX doesn't.
PMSL
Sent from my iPhone using Tapatalk
Installed OpenViX 5.2 and worked.
Andy_Hazza
23-04-20, 12:00
5.3.025 is the latest image >> https://www.openvix.co.uk/index.php/downloads/octagon-images/sf4008/
Sent from my iPhone using Tapatalk
abu baniaz
23-04-20, 12:11
Are you flashing by USB or using ofgwrite via Image Manager?
I have compared the file structures, they all contain the same filenames. The biggest difference is the size of the image, a whopping 10MB. The receivers have a maximum size of image that can be flashed by USB. This is not the same as the maximum size of flash.
How do I provide logs if the receiver won't boot?
Serial cable?
Are you flashing by USB or using ofgwrite via Image Manager?
Serial cable?
I am flashing with USB.
Andy_Hazza
23-04-20, 14:32
I am flashing with USB.
Use image manager tool. FTP your 5.3.025 image to your receiver and flash via Blue button > ViX > Image Manager then highlight 5.3.025 and press the Blue button to flash.
Sent from my iPhone using Tapatalk
abu baniaz
23-04-20, 14:38
Could other people who say there isn't a problem try by flashing by USB. Make a settings backup so you can restore it afterwards.
Identifying problem and fixing it is a lot better than avoiding it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.