Using a triple Monoblock plus one other LNB

[bazzerkap]

Here's a puzzle for you. :-)

I have a triple monoblock LNB on one dish for Sats 13E, 16E and 19.2E. I have another dish with a single LNB for Sat 39E. I would like to connect all Sats/LNBs using Diseqc for automatic switching by the Octagon eg; Say using the A/B/C/D Diseqc settings but these will seemingly only work for A/B/C with the triple LNB. How do I utilise the separate LNB? Any ideas? Many thanks.

[Huevos]

Your best bet would be individual LNBs.

[bazzerkap]

Of course. It's just that due to cramped locations plus trying to utilise what I already have I would ideally like to use the system I proposed. Just wondering if it was easy to do. Maybe using an additional small switch.

[Huevos]

Nothing off the shelf is going to work. You either need to make a switch your self that recombines outputs 1/2/3 or use separate LNBs. If there is a problem with size use Inverto MultiConnect.

[bellejt]

possible in dutch :

https://www.sat4all.com/forums/topic/361076-combineren-canaldigitaal-triple-lnb-quad-met-extra-schotel/page/2/