OpenWebif Streaming

[neo1607]

Got my TM-Nano-3T box all setup, works fine on openwebif i can browse all the settings etc, i've ftp'd stuff like my cccam and picon folder to the box so i know networking is fine,

Whenever I try to click on a stream to stream it to my PC it downloads a .m3u file but it doesn't seem to want to play in VLC or WMP or any other program, I've also tried some android apps but it just comes up with "cannot play this steam"

is there something im missing, any settings on the box I should edit, I have the latest OpenVix image from 22nd December installed on the box

 

[neo1607]

Also on Openwebif if i go to Box Control > Grab Screenshot > Screenshot (video) and set refresh to 0 it is almost live playback so I know OpenWebif is seeing the box perfect

 

[pembo]

try MPC-HC which I know works, though VLC should also.
You can open the m3u in a text editor such as notepad and pull out the stream URL to test direct if needed.

 

[abu baniaz]

Just tried a 3t combo using VLC, streamed fine. Was a terrestrail channel though.

 

[neo1607]

It's weird, I rebooted my box, I can get 1 channel to load fine in VLC, if i try a different channel it won't load, but the 1st m3u stream will load again afterwards, is there any settings I maybe need to edit?

 

[judge]

How are you stopping the first stream?
If you watch a recording on the box (so no tuners are in use) can you then stream a second channel?

 

[neo1607]

Just stopped the stream with the stop button on vlc, I will try doing a recording as the box is only new, just got it this afternoon so not done a recording yet.


Actually think it may be an issue with my lnb feed as when i go into SATFINDER, Tuner A says N/A Tuner B says 0.0

 

[abu baniaz]

Do you have wires connected to all three tuners?
Are they all configured correctly?
What cam are you using? Name and version number please.

 

[neo1607]

I have the wires connected to lnb feed 1 and 2, I think they are configured correctly? Don't have anything going into the third tuner

Don't suppose it will make much difference but the lnb feeds were 95% strength on my sky box in the settings menu so they should be ok

Cam im using is CCCam 2.3.0 (was just the latest one in the plugins menu)

 

[abu baniaz]

Disable one tuner at a time. Do you get a picture with the other tuner active? Test tuner A then B.

 

[neo1607]

Rebooted the box Tuner A gets a signal strength when i go into SATFINDER, tuner 2 gets nothing, swapped cables about nothing, tried one cable at a time, only tuner A got a lock.

However I know both feeds are working coz they work perfect in my sky box, is it possible I have been sent a faulty TM-Nano-3T with a faulty set of tuners :'(

 

[abu baniaz]

Possibly. Contact your reatiler.

 

[neo1607]

Got it from the forum sponsor, only problem is I won't get the box till the new year now

Think it could be a software issue / reflash fix it, or not worth the bother?

 

[judge]

When you had one channel streaming, what was the box doing? was it tuned to another channel or the same channel?
With the box streaming, does the FIB (OK button press) show more than tuner A in use?

 

[neo1607]

Was tuned to the same channel dunno about what it said

I did have PiP working earlier though on 2 different channels

I've tried flashing a 4D image instead of Vix to see if it notices the second tuner

 

[judge]

Was tuned to the same channel dunno about what it said

Using the same working tuner/tuner config/feed so.

I did have PiP working earlier though on 2 different channels

Do you remember the channels? If on the same transponder, PIP would work on a single feed/tuner. If not, both tuners were working.

I've tried flashing a 4D image instead of Vix to see if it notices the second tuner

Let us know how you get on...

 

[neo1607]

No luck with the 4D image, second tuner still isn't showing anything

Poor show when a £199 box has a dodgy 2nd tuner

Wouldn't mind but will most likely have to wait till after new year now before getting a replacement box which is frustrating

 

[neo1607]

Tuner B is dead?

Just wondering if anyone else has had this problem

Tried swapping lnb feed cables about on the box, tried moving sockets on the lnb to see if it was maybe just a dodgy feed, even tried several different images. Tuner B just refuses to pick up a signal.

Box was only delivered yesterday (23rd Dec) just a shame if the tuner is dead because I will have to wait till 5th Jan to get a new one now.


Is there anything else I could possibly try?

 

[cactikid]

is tuner b setup correctly for the sat you are using,recheck tuner configuration?

recheck your f connector and you dont have a splitter on the cables.

 

[neo1607]

No splitter on the cables, they came straight off a Sky setup, so the cables go direct to the LNB, and the f connectors should be fine as both feeds get 95% strength on my old sky box.

Tuner B is setup correctly as far as I can tell