ViX Team Vu+ Duo Image v2.1 - 24/03/2011

[Sicilian]

Anyone having issues using compnent output please see this thread http://www.world-of-satellite.com/s...ect-settings-for-users-using-component-output

 

[delahzo]

thanks guys for another great image, the autotimer on current epg thing is great!

I see you have an Avermedia Volar Black HD plugin available for the A850 stick - I've tried but cannot get it to work, it briefly appeared as Tuner c but after a reboot it disappeared.

these are the steps I took:
Flash new image
Software update
*reboot*
ccam.cfg transferred
bouquets transferred
*reboot*
setup ccam
*reboot*
download correct dvb plugin
*reboot*
plugin actual dtt usb stick
*reboot*
look for it in service settings
No recognition of stick

I also tried as above without transferring ccam etc and tried with stick plugged in before downloading driver.

Thanks.

 

[dane]

please nfi version.... Thanks...

 

[frank]

Great image. Works spot on

Yes great image, but not working spot on. Time-shift won't rewind or forward from one certain speed to another. I'm sure their will be a patch for this soon.

 

[dfdream]

Uploaded vix 2.1 this evening.

Was recording 1 DTT on Nova-t and 2 Sat channels when I noticed the spinning VIX.
I didnt see a green screen (might have missed it) but there was a crash log.
D

 

[bigup7]

am i able to backup my settings then flash 2.1 then restore my settings?

or is it best to start from scratch?

 

[bassethound]

am i able to backup my settings then flash 2.1 then restore my settings?

or is it best to start from scratch?

if you are already on Vix 2.0 its safe to do it this way i did it my self last night no problems:thumbsup:

 

[punisher]

yeh i did it myself too and everything went smoothly

 

[dane]

has any one NFI version ...???

 

[underzone]

has any one NFI version ...???

No .

 

[fintannl]

now i don't want to sound like a whinge but i always loved pressing the +/- channel button on the remote control and getting the current bouquet presented. IrishChris pointed out the solution many eons ago but it took a bit of reading to figure. Now its my personal viewpoint that the longepg setting that irishchis suggested is by far the best solution to how the remote should work. so once again i request that if it were possible it would be darn great if it were set as default. what i loved about the new image is that when i plugged back in my usb ( system will not reload with two different usb sticks installed) my silverfox picons were still intact. Would miss them big time as they look fantastic. and rihanna don't look half bad as a boot logo.

 

[Mr. Mister]

Has your problem regarding that one box and not being able to download the epg been resolve with this image (or even before this image? )

Hi Poo..

Yes buddy.. this fixed the issue with the EPG.. All working perfectly now..

I have no idea why it would not work with 2.0.. But all working well now since 2.1..

Thanks

 

[Rob van der Does]

now i don't want to sound like a whinge but i always loved pressing the +/- channel button on the remote control and getting the current bouquet presented.

Why don't you use the Multi Quick Button plugin: you can set every button to behave just as you wish.

 

[Krieg]

If I have PLi and I install this, would the recordings I have in the box be lost?

 

[bassethound]

No you will not lose your recordings if you switch images

just dont re-initialize you HDD as this only needs to be done to the hard drive once

 

[can7]

put this on a usb stick switch on my vu+ (1.3) but it doesnt read the usb?

 

[Stanman]

did you format the stick and only put the folder DUO on the stick?
No other sticks plugged in?

 

[can7]

did you format the stick and only put the folder DUO on the stick?
No other sticks plugged in?

typical just my luck must be a faulty usb stick used a different one and its installing now

 

[Hamram]

How can I get the info bar look like the one in the third picture, counted from the bottom, in the first posting..? I have the wide info bar, and I can't find any settings to get it more narrow... Is this possible?

 

[Stanman]

How can I get the info bar look like the one in the third picture, counted from the bottom, in the first posting..? I have the wide info bar, and I can't find any settings to get it more narrow... Is this possible?

Long OK press