latest image will not put a ipk oscm icam in to the image at all it works withothers but not the latest one could some one test mod
latest image will not put a ipk oscm icam in to the image at all it works withothers but not the latest one could some one test mod
Iv got a back of the same image took my ipk oscam icam off the image put it back on and it loads on no trouble and works but when I tried putting a new image on the oscam icam would not load on to the image at all it’s got to be a bug in the down loads
I tried a new image because iv had problems with the abm and the epg now I no why I think
Just use oscam-latest from the feeds.
Will that work like oscam icam dose but why can’t I down load oscam icam
You will know when you try.
No it Dosent uk sly closed iv for got u haven’t the rights.
Last edited by deltec; 15-06-24 at 16:55.
It does work
For oscam try oscam latest available in download plugins, softcams.
Put your oscam config files in /etc/tuxbox/config/oscam-latest/
Restart your box.
Menu, setup, softcam managed, softcam script
Press right to choose oscam-latest
Press down on SoftcamScrip enable/disable cam restart press right to Restart softcam.
Green to save.
Oscam should now be running.
Goto OpenWebif using your box ip address.
Choose extras then OSCam Webinterface.
Select config and choose stream relay. Mode (requires OSCam restart) set to enable.
In caid add
098D,0960,0961,0963,0919,093B,09CD
Screenshot_2024-06-09-01-59-16-76_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
I don't think you need all those caids but it should be ok to leave them in.
Restart oscam.
Last edited by dsayers; 15-06-24 at 19:46.
Using a Vu+Uno4k using a sundtek DVB-S/S2 USB tuner with vix 6.6.xxx developer image
abu baniaz (18-06-24),deltec (15-06-24)
Add service to bouquet dose not work on vix 66.001 when I reboot nothing there iv had to go back to vix 6.3.005 and that works ok doing the same thing could some one have a look at this problem that iv been having thanks deltec
We’re dose 17999 go could boday tell me we’re I put in the menus
We’re do I look on webif to put the number in
In oscam webif.
Code:http://<box-ip>:8081/config.html?part=streamrelay
abu baniaz (18-06-24)
I have moved your other posts about the same topic into here. I have also retitled your thread to what you actually mean. Please do not start more threads about this. People will try to help you within the rules here. You are doing something wrong.
The config files attached with the various oscams have different ports assigned in oscam.conf. The one for the oscam in openvix is Port 83. So if you are going to use the url directly as suggested above, adjust it accordingly. That is the most direct route of doing it.
So if your receiver's IP address is 192.168.1.26, you would paste:
Code:http://192.168.1.26:83/config.html?part=streamrelay
Another way so that you do not have to concern yourself about the port , open up the normal openwebif
Towards bottom left corner, you will see the "OSCAM Webinterface", click it
1.png
Then click on "Config" and then "Stream Relay"
2.jpg
Enable the Stream Relay module, enter the CAIDS you want, then Save your changes
3.png
Then restart oscam
4.jpg
deltec (18-06-24)
Another way is to just add the following to oscam.conf
[streamrelay]
stream_relay_enabled = 1
stream_relay_ctab = 098D,0960,0961,0963,098C,09C4
deltec (18-06-24)
We’re do I put the obove just in the config then could explain