Seen this on another board and box cant accept a sat signal or ....
Here is a pic of the configuration under information.
Out of curiousity I have never seen this before and wondered is it a fault or .. something else.
Last edited by bmitie; 22-09-24 at 10:38.
Strange as its not seeing a sat signal with all the things you have tried and other boxes work in the same spot.
Reflashed and no difference and wonder if H8S users or others can comment?
bmitie (25-09-24)
Its the bit unde r CPU that has me intrigued!!
new processor : - High-performance Cortex A7 Processor
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
bmitie (25-09-24)
Is that from the spec? and image cant recognise it? Would that affect functionality ie cant get sat signals?
is from specs and all over internet and should not give problems for channel search (tuners)
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
bmitie (25-09-24)
Ah that would indicate a hardware fault then.
I see no tuner info. Maybe do a reflash or make tuner settings right
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
its not a fault its just that the value is not being picked up from the usual proc info.......... I am told its fixed in latest openbh (if that what you are using)Originally Posted by bmitie
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
bmitie (25-09-24)
No I only saw the pic on another board and... thought there was a simple explanation, ie its a fault. Openvix is used and box has been flashed to 6.6. I went back and found the thread. And I looked at box on here. Its great value but the user cant get box to lock on a sat signal, and they have another box that they can plug in and get a signal, its 28e they want.
Its no big deal, and box is under warranty.
Tuners are correct ie sat and DTT.
or his tuners are strickter and LNB is not optimal included the dish.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
bmitie (25-09-24)
No box worked initially for about 6 months.
??????? and they have another box that they can plug in and get a signal, its 28e they want
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
Other boxes have been plugged in there and work straight away , that box of his shows 0% signal on 28.2.
Fully reflashed and no settings restore and epg was stored on usb.
that box i as cheap as chips and i'd say the idea is if it works great but if it goes tits up then = lesson learnt, cheap is not always good and good is not always cheap. confucius
Posting Permissions
Reply With Quote