[VU+ Solo2] CCCAM does not work after a power failure

[k2laci]

Since the 6.2 release, if the sat-receiver (VU+ SOLO2) shuts down due to a power failure, the CCCAM will fail after restart.

The transmission is interrupted every 10 seconds and restarts after 10 seconds.

The only way to solve the error is to reinstall the image.

 

[twol]

Since the 6.2 release, if the sat-receiver (VU+ SOLO2) shuts down due to a power failure, the CCCAM will fail after restart.

The transmission is interrupted every 10 seconds and restarts after 10 seconds.

The only way to solve the error is to reinstall the image.

debug log?
How are you starting, stopping CCcam?

 

[k2laci]

After restarting the satellite receiver, the picture freezes for 10 seconds, then restarts and stops again.

CCCAM start/stop does not help.

Restore settings does not help.

Only image re-flash and then restore settings helps.

 

[bellejt]

convert and go to oscam maybe ?

 

[twol]

After restarting the satellite receiver, the picture freezes for 10 seconds, then restarts and stops again.

CCCAM start/stop does not help.

Restore settings does not help.

Only image re-flash and then restore settings helps.

Can you post debug logs

 

[deltec]

This a strange one

 

[BobbyC]

My cccam stopped working also latest vix image, use for the wife's tivusat Italian channels, legit card in the box, I have a working oscam config that doesnt seem to work either anymore.
Not sure how to debug or whats changed if anything

 

[urie]

My cccam stopped working also latest vix image, use for the wife's tivusat Italian channels, legit card in the box, I have a working oscam config that doesnt seem to work either anymore.
Not sure how to debug or whats changed if anything

what I read elswere was that from 12/21/2022 Tivusat wants to block cards on non-certified decoders.

 

[BobbyC]

Holy crap, you are right, did a quick search for that. So we still have the all FTA RAI channels coming through, so at least that, … what can you do.

Thanks for the tip urie

https://www.broadbandtvnews.com/2022/12/07/tivusat-blocks-uncertified-decoders/

 

[ziggysdomain]

Shoot! Is it likely a workaround will emerge? Any ideas?

 

[ziggysdomain]

I see from the link to the original reporting at https://www.investireoggi.it/tech/tivusat-blocca-tessere/ that legal cards should function in a cam. What led me to this forum a couple of years back was the fact that I couldn't get my card and cam to work in the VuPlusUltimo 4K. My older non-4K box was still working with another card and cam (I have to check this now after this recent change because it's currently not switched on) and BobbyC, who has reported the issue here, and The Sicilian helped me set up the 4K with a softcam. I'm wondering now if there might be a solution with a cam?

 

[bellejt]

from other site : You have to run oscam web interface, next run readers, and write emm from to Your Tivusat reader. That's all. After that Your card will be works properly.

 

[BrianG61UK]

There was a change to the way software CAMs work in OpenViX quite recently.
I remember I moved my oscam configuration files to a different directory.
I can't remember if it was an optional change, or whether I had to do it.
I think it must have been due to this:
https://www.world-of-satellite.com/...ViX-6-0-and-support-for-Oscam&highlight=oscam

 

[Huevos]

There was a change to the way software CAMs work in OpenViX quite recently.
I remember I moved my oscam configuration files to a different directory.
I can't remember if it was an optional change, or whether I had to do it.
I think it must have been due to this:
https://www.world-of-satellite.com/...ViX-6-0-and-support-for-Oscam&highlight=oscam

Using the new location is optional. This change was for MIPS boxes that had stability problems with OSCam.

 

[BobbyC]

from other site : You have to run oscam web interface, next run readers, and write emm from to Your Tivusat reader. That's all. After that Your card will be works properly.

Can anyone elaborate on this,


Sent from my iPhone using Tapatalk

 

[spanner123]

Using the new location is optional. This change was for MIPS boxes that had stability problems with OSCam.

Funnily enough using the latest oscam binaries and the problem has disappered. Softcam manager works just like it should.

 

[BobbyC]

Can anyone elaborate on this,


Sent from my iPhone using Tapatalk

I googled the text, it led me to another site with a long string, I was able get tivusat /mediasat channels going again in oscam following the steps,


Sent from my iPhone using Tapatalk

 

[Huevos]

Please post the steps.

 

[bellejt]

if allowed see this topic : https://www.linuxsat-support.com/thread/145054-oscam-config-tivusat-ok/?postID=700443#post700443

If not pls remove the link

 

[BobbyC]

For oscam

Http://Your_box_IP:8888

Readers > Action (the little downward arrow) Paste in the string and launch

Sent from my iPhone using Tapatalk