AB-Com PULSe 4K SE only £99! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K SE only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
AB-Com PULSe 4k Rev II Twin tuner only £149! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[VU+ Solo2] CCcam no working after major IMAGE Upgrade

P

peterthepainter

New member
Joined
Jul 16, 2014
Messages
14
Reaction score
0
Points
0
I have not updated my reciever since 2016 but it has been working fine running CCcam 2.3.0
I'm am looking at IPTV, so I decided to upgrade my OPENVIX IMAGE from 3.2.004 to 5.3.005
My settings backups were incompatible so I had to manually reset everything!
However, I loaded CCcam directly from the image addons and used DCC to reload my CCcam.cfg
CCcam 2.3.0 is up and running, but none of my encrypted channels will open.
I've played around for hours, but I'm unsure how to trace the problem, it all seems to be ok.
Do I have a compatibility issue with CCcam and the new image?
Advice gratefully recieved.
 
Which encrypted channels? If Sky premium channels, they are long gone.........


Sent from my iPhone using Tapatalk
 
use oscam instead and convert your cccam.cfg with convertor program.
 
Andy_Hazza said:
Which encrypted channels? If Sky premium channels, they are long gone.........


Sent from my iPhone using Tapatalk
Click to expand...

Hi. I'm in Spain. I know that Sky has gone I watch UK FTA channels on Freesat. I have a motor and USALS setup for 40East to 30West and I open Digital+ and Movistar, for various Eurosport etc. My missus loves Mezzo HD Classical Music channel.
 
I'm running ccam 2.3 with openvix 5.3 without issue. I was able to import settings as I updated from 5.2 right enough and have generally kept openvix up to date previously.

In the ccam plugin settings, is your provider showing green under 'servers'?
 
bellejt said:
use oscam instead and convert your cccam.cfg with convertor program.
Click to expand...

I've installed OSCAM and spent hours working it out, but I still have a problem. I can see everything in the WebIf and it seems to be a connection problem. Under 'Status' it says 'proxies 3/3 (0 of 3 online)', and at the end of the lines it says ERROR. It's may be a simple mistake in the .server or .conf files but I need a little help.

(I guess it might be the same connection problem with cccam, so it might not be those files).

(I also have a new provider and router. Would that make any difference?)
 
Liamalone said:
In the ccam plugin settings, is your provider showing green under 'servers'?
Click to expand...

Yes, I have a green 'tick' in 'softcam manager'. I also have a green tick with Oscam now, but still no luck. I think it might be a connection issue.
 
I've now spent hours learning, and reflashed the box lots of times. I now have a clean install with OSCAM only and I have found the oscam.log file (attached). It's clear from that, it's not connecting, but I need some help to enterpret the file and understand what the problem is.
 
Last edited by a moderator:
I've now spent hours learning, and reflashed the box lots of times. I now have a clean install with OSCAM only and I have found the oscam.log file (attached). It's clear from that, it's not connecting, but I need some help to enterpret the file and understand what the problem is.

I've also done Network test in Network Setup menu and it all comes up green. Also the plugins are all available in the menus, so the box must be online.

Makes me think Passwords. But nothing has changed.

Do I need to contact umbrellasharing.tv? But I've used this arrangement for several years, the main change has been the Image Upgrade. Plus I am now with a 4G router and more download speed, and I operate as client only.
 
Last edited by a moderator:
Hi, use DCC and telnet, look in /usr/bin and see the exact name of your bin, oscam or CCcam and go with telnet also...../usr/bin/oscam and entr. and see the answer....
config fichiers are frequently in /etc/tuxbox/config....
 
I have deleted the attachment. Please check debug logs before you upload and delete any sensitive information.

Code: 
(reader) serv20.xxxxxxx.com [cccam] connecting to serv20.xxxxxxxxx.com:13100
(reader) serv07.xxxxxxx.com [cccam] connecting to serv07.xxxxxxxxx.com:12900
(reader) serv21.xxxxxxx.com [cccam] connecting to serv21.xxxxxxxxx.com:13150

Code: 
connect failed: Connection timed out
 
raoul74 said:
Hi, use DCC and telnet, look in /usr/bin and see the exact name of your bin, oscam or CCcam and go with telnet also...../usr/bin/oscam and entr. and see the answer....
config fichiers are frequently in /etc/tuxbox/config....
Click to expand...

Thanks m8, but I'm struggling to understand you. I look in usr/bin (there is also a usr/sbin) but neither contain any folders. And there are no files with oscam or ccccam in the title.
And yes, my config files are /etc/tuxbox/config
 
peterthepainter said:
Okay #abu baniaz, got that. Bit of a naive error, sorry.
Click to expand...

Code: 
2020/02/04 22:13:25 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11572 (mipsel-oe-linux)
2020/02/04 22:13:25 00000000 s     (main) System name    = Linux
2020/02/04 22:13:25 00000000 s     (main) Host name      = vusolo2
2020/02/04 22:13:25 00000000 s     (main) Release        = 3.13.5
2020/02/04 22:13:25 00000000 s     (main) Version        = #1 SMP Thu Oct 3 21:09:12 UTC 2019
2020/02/04 22:13:25 00000000 s     (main) Machine        = mips
2020/02/04 22:13:25 00000000 s     (main) Stb model      = dm8000
2020/02/04 22:13:25 00000000 s     (main) Stb vumodel    = vusolo2
2020/02/04 22:13:25 00000000 s     (main) Stb boxtype    = vusolo2
2020/02/04 22:13:25 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 15811
2020/02/04 22:13:25 00000000 s   (config) services reloaded: 0 services freed, 4 services loaded, rejected 0
2020/02/04 22:13:25 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/02/04 22:13:25 00000000 s     (main) signal handling initialized
2020/02/04 22:13:25 00000000 s   (config) 2 provid's loaded
2020/02/04 22:13:25 00000000 s   (config) 2 service-id's loaded in 0 ms
2020/02/04 22:13:25 00000000 s      (net) cs378x: initialized (fd=5, port=13001)
2020/02/04 22:13:25 00000000 s      (net) newcamd: initialized (fd=6, port=12121)
2020/02/04 22:13:25 00000000 s      (net) cccam: initialized (fd=7, port=12000)
2020/02/04 22:13:25 00000000 s   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] creating thread for device serv20.xxxxxxxxxxxxxxx.com
2020/02/04 22:13:25 00000000 s   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] creating thread for device serv21.xxxxxxxxxxxxxxx.com
2020/02/04 22:13:25 00000000 s   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] creating thread for device serv07.xxxxxxxxxxxxxxx.com
2020/02/04 22:13:25 00000000 s     (main) waiting for local card init
2020/02/04 22:13:25 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com: resolved ip=69.172.201.153
2020/02/04 22:13:25 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] connecting to serv20.xxxxxxxxxxxxxxx.com:x1xxx
2020/02/04 22:13:26 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com: resolved ip=69.172.201.153
2020/02/04 22:13:26 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] connecting to serv21.xxxxxxxxxxxxxxx.com:x2xxx
2020/02/04 22:13:26 516DAE68 h    (webif) webif: decompressed 165646 bytes back into 402448 bytes
2020/02/04 22:13:26 516DAE68 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/02/04 22:13:26 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com: resolved ip=69.172.201.153
2020/02/04 22:13:26 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] connecting to serv07.xxxxxxxxxxxxxxx.com:x3xxx
2020/02/04 22:13:26 00000000 s     (main) init for all local cards done
2020/02/04 22:13:26 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/02/04 22:13:26 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/02/04 22:13:26 493D0F2F c   (client) plain dvbapi-client granted (dvbapiau, au=auto (4 reader))
2020/02/04 22:13:26 493D0F2F c   (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2020/02/04 22:13:26 493D0F2F c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2020/02/04 22:13:26 493D0F2F c   (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2020/02/04 22:13:26 493D0F2F c   (dvbapi) Demuxer 0 found 0 ECM pids and 11 STREAM pids in CA PMT
2020/02/04 22:13:29 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:29 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] proxy initialized, server serv20.xxxxxxxxxxxxxxx.com:x1xxx
2020/02/04 22:13:29 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:29 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] proxy initialized, server serv21.xxxxxxxxxxxxxxx.com:x2xxx
2020/02/04 22:13:29 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:29 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] proxy initialized, server serv07.xxxxxxxxxxxxxxx.com:x3xxx
2020/02/04 22:13:42 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] connecting to serv07.xxxxxxxxxxxxxxx.com:x3xxx
2020/02/04 22:13:42 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] connecting to serv20.xxxxxxxxxxxxxxx.com:x1xxx
2020/02/04 22:13:42 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] connecting to serv21.xxxxxxxxxxxxxxx.com:x2xxx
2020/02/04 22:13:45 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:45 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:46 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:55 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] connecting to serv20.xxxxxxxxxxxxxxx.com:x1xxx
2020/02/04 22:13:55 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] connecting to serv07.xxxxxxxxxxxxxxx.com:x3xxx
2020/02/04 22:13:55 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] connecting to serv21.xxxxxxxxxxxxxxx.com:x2xxx
2020/02/04 22:13:59 0710DFF9 p   (reader) serv20.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:59 7237B123 p   (reader) serv07.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out
2020/02/04 22:13:59 2EED6649 p   (reader) serv21.xxxxxxxxxxxxxxx.com [cccam] connect failed: Connection timed out

Hoping this is more acceptable, and that it might help someone to sort me out. :confused:
 
All three connections failed, are you sure you have converted correctly? Might be better to ask on another forum with less stringent rules than us on what you are doing.

You can also view using oscam status.
 
peterthepainter said:
Thanks m8, but I'm struggling to understand you. I look in usr/bin (there is also a usr/sbin) but neither contain any folders. And there are no files with oscam or ccccam in the title.
And yes, my config files are /etc/tuxbox/config
Click to expand...

Hi, yes, scuse my friend, oscam or an other cams with Openwix are in /usr/softcams and for to lance an emu it's very simple.....
You go to blue bouton and softcam manager, after you mahe choice in emu and blue bouton and green for start....don't forget to changed emu, to stop the first and after go with an other with blue bouton......
 
abu baniaz said:
All three connections failed, are you sure you have converted correctly? Might be better to ask on another forum with less stringent rules than us on what you are doing.

You can also view using oscam status.
Click to expand...

Yeah, thanks I appreciate I'm in a sensitive area, but also I no longer think it's an IMAGE problem. That means I'm also in the wrong place now and maybe need to migrate my query elswhere to OSCAM or CCcam.

But any other advice still gratefully received.
 
There are sample config files on Willow3092's Toolkit page

Code: 
https://willobuild.com/utilities.php

Also, very important you edit files using Notepad++, not windows Notepad.
 
Last edited:
Got it sorted, all up and running.

I have been a complete knob! Although I have had the same service for 5 years, the domain name servers were changed 2 years ago. I must have updated my CCcam.cfg on the stb but the backed up c-lines I had kept were the old ones! I was trying to connect with those.

However, not a complete waste of time, since I am now a convert to OScam (love it) and have now learned quite a bit about it.

But for my error I would still be running blind with CCcam and none the wiser.

Thanks to all you guys for the advice.
 
You must log in or register to reply here.

OpenViX Feeds Status

Back
Top