Sirius
New member
Hey guys can anyone help me, i have a paid subscription to privateinternetaccess i can access sites like 1channel movies4k on my pc when connected to my vpn i have set up openvpn on my vu solo 2 and everything seems to be connection ok and my box ip seems to change when openvpn is running, but when i go on ts media and try to load 1channel up nothing comes up as if my vpn is not working when it says it is in my log ie 1channel being blocked by my ISP still.
I know ideally its better to set VPN up at the router but unfortunately i have a BT Home Hub 5 and this is not possible on this router so until i can afford a decent VDSL2 router to replace my home hub, id really like to get this working on my solo. Thanks in advance for any help.
MY CONFIG
client
dev tun
proto udp
remote uk-london.privateinternetaccess.com 1194
remote uk-southampton.privateinternetaccess.com 1194
#us-midwest.privateinternetaccess.com 1194
#us-west.privateinternetaccess.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /etc/openvpn/ca.crt
tls-client
remote-cert-tls server
auth-user-pass /etc/openvpn/password.conf
comp-lzo
verb 1
reneg-sec 0
crl-verify /etc/openvpn/crl.pem
log /etc/openvpn/openvpn.log
MY LOG
Sun Oct 26 15:05:14 2014 OpenVPN 2.3.4 mipsel-oe-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Oct 3 2014
Sun Oct 26 15:05:14 2014 library versions: OpenSSL 1.0.1i 6 Aug 2014, LZO 2.08
Sun Oct 26 15:05:14 2014 WARNING: file '/etc/openvpn/password.conf' is group or others accessible
Sun Oct 26 15:05:14 2014 UDPv4 link local: [undef]
Sun Oct 26 15:05:14 2014 UDPv4 link remote: [AF_INET]46.28.53.146:1194
Sun Oct 26 15:05:14 2014 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Sun Oct 26 15:05:15 2014 [Private Internet Access] Peer Connection Initiated with [AF_INET]46.28.53.146:1194
Sun Oct 26 15:05:17 2014 TUN/TAP device tun0 opened
Sun Oct 26 15:05:17 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sun Oct 26 15:05:17 2014 /sbin/ifconfig tun0 10.140.1.6 pointopoint 10.140.1.5 mtu 1500
Sun Oct 26 15:05:17 2014 Initialization Sequence Completed
I know ideally its better to set VPN up at the router but unfortunately i have a BT Home Hub 5 and this is not possible on this router so until i can afford a decent VDSL2 router to replace my home hub, id really like to get this working on my solo. Thanks in advance for any help.
MY CONFIG
client
dev tun
proto udp
remote uk-london.privateinternetaccess.com 1194
remote uk-southampton.privateinternetaccess.com 1194
#us-midwest.privateinternetaccess.com 1194
#us-west.privateinternetaccess.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /etc/openvpn/ca.crt
tls-client
remote-cert-tls server
auth-user-pass /etc/openvpn/password.conf
comp-lzo
verb 1
reneg-sec 0
crl-verify /etc/openvpn/crl.pem
log /etc/openvpn/openvpn.log
MY LOG
Sun Oct 26 15:05:14 2014 OpenVPN 2.3.4 mipsel-oe-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Oct 3 2014
Sun Oct 26 15:05:14 2014 library versions: OpenSSL 1.0.1i 6 Aug 2014, LZO 2.08
Sun Oct 26 15:05:14 2014 WARNING: file '/etc/openvpn/password.conf' is group or others accessible
Sun Oct 26 15:05:14 2014 UDPv4 link local: [undef]
Sun Oct 26 15:05:14 2014 UDPv4 link remote: [AF_INET]46.28.53.146:1194
Sun Oct 26 15:05:14 2014 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Sun Oct 26 15:05:15 2014 [Private Internet Access] Peer Connection Initiated with [AF_INET]46.28.53.146:1194
Sun Oct 26 15:05:17 2014 TUN/TAP device tun0 opened
Sun Oct 26 15:05:17 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sun Oct 26 15:05:17 2014 /sbin/ifconfig tun0 10.140.1.6 pointopoint 10.140.1.5 mtu 1500
Sun Oct 26 15:05:17 2014 Initialization Sequence Completed