AB-Com PULSe 4K SE only £99! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K SE only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
AB-Com PULSe 4k Rev II Twin tuner only £149! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[VU+ Solo4K] OSCAM not working working properly for virmin or sky

Status
Not open for further replies.
M

MK

V.I.P
Joined
Nov 9, 2012
Messages
651
Reaction score
4
Points
0
Need a bit help setting up my solo4k. i previously had duo2 working flawlessly with mgcamd. but 4k oscam setup not working for me, sly works fine but vermin freezes ever 30s.
this is my config file in etc/tutbox/config. all the files attributes are 755.


[global]
logfile = /dev/tty
nice = -1
maxlogsize = 50
preferlocalcards = 1
lb_mode = 1
lb_nbest_readers = 2
lb_reopen_seconds = 900
failbantime = 10
double_check = 1

[cache]

[newcamd]
key = 0102030405060708091011121314
port = 18850@0963:000000;18850@1841:000000

[cccam]
port = 12000
nodeid = 7086C3F5107A156C
version = 2.3.0
reshare = 1
stealth = 1

[dvbapi]
enabled = 1
user = dvbapiuser

[monitor]
port = 18001
nocrypt = 0.0.0.0-255.255.255.255
monlevel = 4
hideclient_to = 15

[webif]
httpport = 18800
serverip = 192.168.1.228
httpuser =
httppwd =
httprefresh = 30
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 15


oscam.server file with 1x sly and 2x cable lines


[reader]
label=cable1
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=?????????????,??????
user=?????
password=????????
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

[reader]
label=sly
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=???????????,??????
user=my user
password=mypass
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

[reader]
label=cable 2
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=??????????,???????
user=////////??????
password=??????????
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

and user file

[account]
user = dvbapiuser
group = 1
 
Try putting the caid in each of the server files.

Also change the group of the server to 1, 2 or 3


Sent from my SM-N9005 using Tapatalk
 
duoduo said:
:confused: server and line talk??
Click to expand...

You have 3 readers, set reader 1 as group 1, reader 2 as group 2 etc and in the user account groups 1,2,3 then add the CaID in each reader

Also you don't need the following in a newcamd reader

Code: 
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1
 
its working a bit better with this config file

[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = dvbapi_local
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface

i have corrected the group 1,2,3 now,

but still freezes. i have 1x sly & 2x virmin CAID'S all inserted in oscam.server.
 
Last edited:
As lincsat said you have to much going on in your reader file, try this:

[reader]
label = xxxxx
description = xxxxxx
protocol = newcamd
device = xxxxxxxxxx,xxxxx
key = 0102030405060708091011121314
user = xxxx
password = xxxx
disableserverfilter = 1
caid = 1841
ident = 1841:000000,005A01,005B01,005B03,1F1F1F,FFFFFF
group = 1
emmcache = 1,3,2,0
dropbadcws = 1
audisabled = 1

And this in global:

[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 12000
fallbacktimeout = 8000
clientmaxidle = 60
bindwait = 10
netprio = 1
nice = -10
maxlogsize = 50
preferlocalcards = 1
lb_nbest_readers = 2
lb_reopen_seconds = 900
double_check = 1
 
lincsat said:
You have 3 readers, set reader 1 as group 1, reader 2 as group 2 etc and in the user account groups 1,2,3 then add the CaID in each reader

Also you don't need the following in a newcamd reader

Code: 
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1
Click to expand...

correction--> its working better now. but still freezing, not every 30s now but after 2-3 minutes for 5-10s. its defo not the caids/provider issue as these were working fine/flawlessly with mgcamd (on duo2) and have 2x caids for virmin, sly is fine though
 
Last edited:
DaMacFunkin said:
As lincsat said you have to much going on in your reader file, try this:

[reader]
label = xxxxx
description = xxxxxx
protocol = newcamd
device = xxxxxxxxxx,xxxxx
key = 0102030405060708091011121314
user = xxxx
password = xxxx
disableserverfilter = 1
caid = 1841
ident = 1841:000000,005A01,005B01,005B03,1F1F1F,FFFFFF
group = 1
emmcache = 1,3,2,0
dropbadcws = 1
audisabled = 1

And this in global:

[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 12000
fallbacktimeout = 8000
clientmaxidle = 60
bindwait = 10
netprio = 1
nice = -10
maxlogsize = 50
preferlocalcards = 1
lb_nbest_readers = 2
lb_reopen_seconds = 900
double_check = 1
Click to expand...

not working at all with these setting.
 
i am having a similar problem.
2 lines which have be setup to fallback as oscam picks the fastest

They work but only at 97% which means they freeze numerous times of the day and freeze for about 1 minute each time.
config file
Code: 
[global]
logfile                       = /tmp/oscam.log
fallbacktimeout               = 1150
nice                          = -1
lb_mode                       = 1
lb_retrylimit                 = 500
lb_stat_cleanup               = 48
failbantime                   = 10

[cache]

[dvbapi]
enabled                       = 1
au                            = 1

pmt_mode                      = 0
user                          = user1
boxtype                       = dreambox

[webif]
httpport                      = 8888
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255

server
Code: 
[reader]
label                         = active
description                   = 28E
protocol                      = newcamd
device                        = ****
key                           = 0102030405060708091011121314
user                          = ****
password                      = ****
inactivitytimeout             = 10
fallback                      = 1
cacheex_block_fakecws         = 1
caid                          = 0963
group                         = 1
ccchop                        = 1
audisabled                    = 1

[reader]
label                         = CCam
description                   = 28E
protocol                      = cccam
device                        = ****
user                          = ****
password                      = ****
inactivitytimeout             = 1000
reconnecttimeout              = 10
fallback                      = 1
cacheex_block_fakecws         = 1
group                         = 2
cccversion                    = 2.3.0
cccmaxhops                    = 2
ccckeepalive                  = 1
cccreconnect                  = 2000
audisabled                    = 1
 
MK said:
correction--> its working better now. but still freezing, not every 30s now but after 2-3 minutes for 5-10s. its defo not the caids/provider issue as these were working fine/flawlessly with mgcamd (on duo2) and have 2x caids for virmin, sly is fine though
Click to expand...

I can't give you too much help without falling into the mud, all I will tell you is the higher ECM on cable needs a longer timeout, 8000ms in the global config, me I have mine set as 12000ms with a 8000ms fallback, I have quite a complex setup, I have both my cable set on group 1 with my sly set on group 2 and 2 dvbapiuser accounts, one for each group, the settings I use have taken lots of tweaking and error, it is entirely possible that you would need all my settings files for it to work (which I can't give), but the 8000ms time out for cable is a must.
Ps everytime you change something in Oscam you must restart it.
 
DaMacFunkin said:
I can't give you too much help without falling into the mud, all I will tell you is the higher ECM on cable needs a longer timeout, 8000ms in the global config, me I have mine set as 12000ms with a 8000ms fallback, I have quite a complex setup, I have both my cable set on group 1 with my sly set on group 2 and 2 dvbapiuser accounts, one for each group, the settings I use have taken lots of tweaking and error, it is entirely possible that you would need all my settings files for it to work (which I can't give), but the 8000ms time out for cable is a must.
Ps everytime you change something in Oscam you must restart it.
Click to expand...

i can confirm its looks really good now no freezes just odd glitches, :thumbsup: DaMacFunkin can you let me know your
oscam.user looks something like this

[account]
user = dvbapiuser
group = 1

[account]
user = dvbapiuser
group = 2
 
Sorry if this has been asked before
I have installed cccam manually but it won't load up, does the vu 4k only take oscam?
I have 2 lines and have used a converter but no joy
 
CCcam development stopped a long time ago. It has not been adapted to function on Arm based CPUs like on Solo 4k.

You will have to use oscam.
 
abu baniaz said:
CCcam development stopped a long time ago. It has not been adapted to function on Arm based CPUs like on Solo 4k.

You will have to use oscam.
Click to expand...

ok thanks for info
I have oscam.server, oscam.user and oscam.conf installed in etc/tuxbox i have used a converter for these files - am I missing something?
 
Please start your own thread. Post your configs. obviously, don't post your passwords, box id or anything sensitive.
 
MK said:
Need a bit help setting up my solo4k. i previously had duo2 working flawlessly with mgcamd. but 4k oscam setup not working for me, sly works fine but vermin freezes ever 30s.
this is my config file in etc/tutbox/config. all the files attributes are 755.


[global]
logfile = /dev/tty
nice = -1
maxlogsize = 50
preferlocalcards = 1
lb_mode = 1
lb_nbest_readers = 2
lb_reopen_seconds = 900
failbantime = 10
double_check = 1

[cache]

[newcamd]
key = 0102030405060708091011121314
port = 18850@0963:000000;18850@1841:000000

[cccam]
port = 12000
nodeid = 7086C3F5107A156C
version = 2.3.0
reshare = 1
stealth = 1

[dvbapi]
enabled = 1
user = dvbapiuser

[monitor]
port = 18001
nocrypt = 0.0.0.0-255.255.255.255
monlevel = 4
hideclient_to = 15

[webif]
httpport = 18800
serverip = 192.168.1.228
httpuser =
httppwd =
httprefresh = 30
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 15


oscam.server file with 1x sly and 2x cable lines


[reader]
label=cable1
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=?????????????,??????
user=?????
password=????????
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

[reader]
label=sly
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=???????????,??????
user=my user
password=mypass
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

[reader]
label=cable 2
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=??????????,???????
user=////////??????
password=??????????
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

and user file

[account]
user = dvbapiuser
group = 1
Click to expand...

did you get this sorted - would appreciate your latest settings to try.
 
You're asking to get your backside burned for asking this.
 
Status
Not open for further replies.

OpenViX Feeds Status

Back
Top