N
niteman1969
Guest
Ok up till now I have never got the smartreader working in any vu+ duo
image but it worked fine in my dm800, anyway the problem is that i was
using it on dm800 in dreambox mode on an old image.
In VU+ Images or any new images using OE1.6 you need to use the
smartreader config program to set the Kernel mode on the smartreader
to NORMAL mode and not dreambox mode.
Once I did this it started working straight away.
SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000
Hope this helps someone else..
Regards
Niteman1969
image but it worked fine in my dm800, anyway the problem is that i was
using it on dm800 in dreambox mode on an old image.
In VU+ Images or any new images using OE1.6 you need to use the
smartreader config program to set the Kernel mode on the smartreader
to NORMAL mode and not dreambox mode.
Once I did this it started working straight away.
SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000
Hope this helps someone else..
Regards
Niteman1969
