Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

TM-2T Suttering issues on VIX 726

  • Thread starter Thread starter diviesh
  • Start date Start date
I'm using Vix 726 and I get a crash when I go into user interface and settings menu, has this been fixed in 729?

Before anyone says its because I'm using the Kernel from the 4D image, its not as I have the same image on the Duo with the same issue.

Just tested on 729 send can ho in and out without crash.

Sent from my GT-I9305 using Tapatalk 4
 
The HD stutter was fixed several Driver revisions ago and has not shown in the latest images / drivers, so you should be good to go. make sure you do a fresh flash to 734 as a precaution due to the kernel change.
 
Hi All just installed 734 stutters gone, lip sync gone box is looking and running nice apart from one thing.

for some reason i am unable to initialise the hard drive it errors with a time out.

i have tried 2 80gb hard drives.

any suggestions??

thanks in advance
 
Try updating to build 735 via a online update and try again, if it still does not work try a low level format in a pc / laptop then try in the receiver again.
 
please keep us updated as you go.

Thanks.
 
Upgraded to 735 using the online method, hard disk is still not initialising, time out error. I will try format it in a computer tomorrow and retry
 
You have to unmount it before you can initialise it.

Blue Button > Vix > Mount Manager >

Highlight the HDD and yellow button to unmount.
 
Make sure it's un-mounted before you try to format it.
Blue button -> ViX -> Mount Manager, is it mounted there? if so, unmount it with yellow button & try to initialise it then.
 
Make sure it's un-mounted before you try to format it.
Blue button -> ViX -> Mount Manager, is it mounted there? if so, unmount it with yellow button & try to initialise it then.

Thanks for the advice - nothing mounted and if you try to mount the drive the box crashes.

Still cant get the HD to work - also tried to low level format with no joy.

This drive worked in the 726 image - i don't know what else to do.

any suggestions will be much appreciated
 
I don't know if anyone has tested initialisng a HDD using the newer kernel/drivers. I'll give it bash later if/when the receiver is free and record logs.

As you have said 726 is fine, why not initialise the HDD using that build then flash 735? It will get you out of your predicament.

(This should have been new thread by the way)
 
Last edited:
I don't know if anyone has tested initialisng a HDD using the newer kernel/drivers. I'll give it bash later if/when the receiver is free and record logs.

As you have said 726 is fine, why not initialise the HDD using that build then flash 735? It will get you out of your predicament.

(This should have been new thread by the way)
The drive was initialised initially in 726 but I cant mount it in 735.
 
Hi all I just wanted to give you an update.

I re flashed the box down to 734 and the hard drive mounted instantly, upgraded on line o 735 and the hd stayed

i havn't got a clue what happened but its all ok now.

Thank you so much for all your help and assistants
 
Initialised a HDD without any issue on a TM Single, Openvix build 748 .

Yeah I have initialized HDD's on all three on my TM OE's with the new kernel amd drivers as part of the testing phase just fine.

Sent from my GT-I9300 using Tapatalk 2
 

OpenViX Feeds Status

Back
Top