[ET9x00] ViX Team ET9000 Image v2.2 - 11/06/2011 - Discussion

[pooface]

If you press record on the remote is there away to not ask for confirmation and simply record until programme has finished?

I don't think so, as there are many different options for recording when pressing the red button, so it displays all options for you to choose

 

[beson]

Hi guys (and girls)
This is my first visit on the forum, and I have a little problem.
I got my new ET 9000 yesterday, and of course I flashed it with VIX 2.2, which should be the best image, if you read the forums.
Very easy and quick flashing, and rest of installation was also easy.
Good picture quality. As good as on my two ipboxes.
Ok, my problem now. I get some annoying picture freezings (5-10 sec long) and they come every 5-6 minutes.
I'm using oscam. Have tried different versions, both old and new ones.
I have been using oscam on my ipboxes for nearly one year, but never seen this problem.
My card is a Canal Digital caid 0B00

Here's a log from oscam when the freezing appears and oscam restarts.

2011/07/06 13:59:11 2B37D4B0 c ET9000 (0B00&000000/1006/4E:A2F4): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:21 2B37D4B0 c ET9000 (0B00&000000/1006/4E:C74E): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:31 2B37D4B0 c ET9000 (0B00&000000/1006/4E:C6AD): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:41 2B37D4B0 c ET9000 (0B00&000000/1006/4E:62A1): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:51 2B37D4B0 c ET9000 (0B00&000000/1006/4E:AD13): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:01 2B37D4B0 c ET9000 (0B00&000000/1006/4E:183F): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:11 2B37D4B0 c ET9000 (0B00&000000/1006/4E:3330): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:21 2B37D4B0 c ET9000 (0B00&000000/1006/4E:D3B4): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:31 2B37D4B0 c ET9000 (0B00&000000/1006/4E:6AA8): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:41 2B37D4B0 c ET9000 (0B00&000000/1006/4E:8608): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:51 2B37D4B0 c ET9000 (0B00&000000/1006/4E:1495): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:01:01 2B37D4B0 c ET9000 (0B00&000000/1006/4E:2EE2): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:01:08 2B17D4B0 h unauthorized access from 127.0.0.1 flag 1

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Jul  6 14:01:13 2011
-------------------------------------------------------------------------------
2011/07/06 14:01:13 2AAC78D0 s >> OSCam <<  cardserver started, version 1.00-unstable_svn, build #5517 (mips-tuxbox-linux)
2011/07/06 14:01:13 2AAC78D0 s version=1.00-unstable_svn, build #5517, system=mips-tuxbox-linux, nice=-1
2011/07/06 14:01:13 2AAC78D0 s client max. idle=120 sec, debug level=0
2011/07/06 14:01:13 2AAC78D0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/07/06 14:01:13 2AAC78D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 14:01:13 2AAC78D0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/07/06 14:01:13 2AAC78D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/07/06 14:01:13 2AAC78D0 s signal handling initialized (type=sysv)
2011/07/06 14:01:13 2AAC78D0 s 82 service-id's loaded in 1ms

Today I flashed PLI 2.0, just to check if the freezings were there too.
But no freezings with PLI image.
Too bad it was no doubletuner function (rec one channel and look live on another) in PLI.

Regards beson

 

[pooface]

Hi guys (and girls)
This is my first visit on the forum, and I have a little problem.
I got my new ET 9000 yesterday, and of course I flashed it with VIX 2.2, which should be the best image, if you read the forums.
Very easy and quick flashing, and rest of installation was also easy.
Good picture quality. As good as on my two ipboxes.
Ok, my problem now. I get some annoying picture freezings (5-10 sec long) and they come every 5-6 minutes.
I'm using oscam. Have tried different versions, both old and new ones.
I have been using oscam on my ipboxes for nearly one year, but never seen this problem.
My card is a Canal Digital caid 0B00

Here's a log from oscam when the freezing appears and oscam restarts.

2011/07/06 13:59:11 2B37D4B0 c ET9000 (0B00&000000/1006/4E:A2F4): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:21 2B37D4B0 c ET9000 (0B00&000000/1006/4E:C74E): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:31 2B37D4B0 c ET9000 (0B00&000000/1006/4E:C6AD): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:41 2B37D4B0 c ET9000 (0B00&000000/1006/4E:62A1): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:51 2B37D4B0 c ET9000 (0B00&000000/1006/4E:AD13): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:01 2B37D4B0 c ET9000 (0B00&000000/1006/4E:183F): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:11 2B37D4B0 c ET9000 (0B00&000000/1006/4E:3330): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:21 2B37D4B0 c ET9000 (0B00&000000/1006/4E:D3B4): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:31 2B37D4B0 c ET9000 (0B00&000000/1006/4E:6AA8): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:41 2B37D4B0 c ET9000 (0B00&000000/1006/4E:8608): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:51 2B37D4B0 c ET9000 (0B00&000000/1006/4E:1495): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:01:01 2B37D4B0 c ET9000 (0B00&000000/1006/4E:2EE2): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:01:08 2B17D4B0 h unauthorized access from 127.0.0.1 flag 1

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Jul  6 14:01:13 2011
-------------------------------------------------------------------------------
2011/07/06 14:01:13 2AAC78D0 s >> OSCam <<  cardserver started, version 1.00-unstable_svn, build #5517 (mips-tuxbox-linux)
2011/07/06 14:01:13 2AAC78D0 s version=1.00-unstable_svn, build #5517, system=mips-tuxbox-linux, nice=-1
2011/07/06 14:01:13 2AAC78D0 s client max. idle=120 sec, debug level=0
2011/07/06 14:01:13 2AAC78D0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/07/06 14:01:13 2AAC78D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 14:01:13 2AAC78D0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/07/06 14:01:13 2AAC78D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/07/06 14:01:13 2AAC78D0 s signal handling initialized (type=sysv)
2011/07/06 14:01:13 2AAC78D0 s 82 service-id's loaded in 1ms

Today I flashed PLI 2.0, just to check if the freezings were there too.
But no freezings with PLI image.
Too bad it was no doubletuner function (rec one channel and look live on another) in PLI.

Regards beson

Hi beson.

Welcome to the forums. A post in the introduction section would be useful too (sdorry if u already havew, haven't fully checked as using phone).

As for ur problem, have u ran a software update? How did u install oscam? Do u have webif available in the config?

Problem lies in softcam manager checking that it's not crashed, but not bein able to see it open (likely because oscasm webif is disabled?!)...

Hope this helps, and enjoy ur gr8 purchase...

Sent with Tapatalk

 

[beson]

Thanks pooface for your answer.
My introduction is made now.
I have not made a software update. Can you give me an advice for a sw update for ET 9000.
Do I flash the sw update like like flashing the image? From an usb pen?
I installed oscam from /tmp with an ipk file. Then I changed to new oscam version in /usr/softcams
I have webif in config. The log in my last thread is from oscam webif.

beson

 

[pooface]

Thanks pooface for your answer.
My introduction is made now.
I have not made a software update. Can you give me an advice for a sw update for ET 9000.
Do I flash the sw update like like flashing the image? From an usb pen?
I installed oscam from /tmp with an ipk file. Then I changed to new oscam version in /usr/softcams
I have webif in config. The log in my last thread is from oscam webif.

beson

TO update the image, press blue button, choose software management, and then choose software update. Of course, this will require you to be connected to the internet to do...

No need for reflashing, just an update online.

Once you've updated, you'll be prompted to restart the box. Restart, go to menu -> information -> about. You will notice the latest update version. iirc, the latest public version is 2.2.05...

 

[beson]

OK, I shall flash VIX again later today and make an update to see if it helps.
Luckyli it's a quick procedure to reflash the image.

beson

 

[beson]

Hi again
Now I have reflashed VIX and made an online SW update.
But I only get release version 2.2.01 - 2011-06-12

beson

 

[wii89]

Hi, How do I make AC3 default audio settings on this image as all the channels are on narrative mode?

Thanks

 

[Stanman]

menu>Settings>AVsettings> AC dwonmix Yes

 

[andyblac]

Hi guys (and girls)
This is my first visit on the forum, and I have a little problem.
I got my new ET 9000 yesterday, and of course I flashed it with VIX 2.2, which should be the best image, if you read the forums.
Very easy and quick flashing, and rest of installation was also easy.
Good picture quality. As good as on my two ipboxes.
Ok, my problem now. I get some annoying picture freezings (5-10 sec long) and they come every 5-6 minutes.
I'm using oscam. Have tried different versions, both old and new ones.
I have been using oscam on my ipboxes for nearly one year, but never seen this problem.
My card is a Canal Digital caid 0B00

Here's a log from oscam when the freezing appears and oscam restarts.

2011/07/06 13:59:11 2B37D4B0 c ET9000 (0B00&000000/1006/4E:A2F4): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:21 2B37D4B0 c ET9000 (0B00&000000/1006/4E:C74E): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:31 2B37D4B0 c ET9000 (0B00&000000/1006/4E:C6AD): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:41 2B37D4B0 c ET9000 (0B00&000000/1006/4E:62A1): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 13:59:51 2B37D4B0 c ET9000 (0B00&000000/1006/4E:AD13): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:01 2B37D4B0 c ET9000 (0B00&000000/1006/4E:183F): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:11 2B37D4B0 c ET9000 (0B00&000000/1006/4E:3330): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:21 2B37D4B0 c ET9000 (0B00&000000/1006/4E:D3B4): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:31 2B37D4B0 c ET9000 (0B00&000000/1006/4E:6AA8): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:41 2B37D4B0 c ET9000 (0B00&000000/1006/4E:8608): found (250 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:00:51 2B37D4B0 c ET9000 (0B00&000000/1006/4E:1495): found (249 ms) by canal_digital (of 1 avail 1)
2011/07/06 14:01:01 2B37D4B0 c ET9000 (0B00&000000/1006/4E:2EE2): found (250 ms) by canal_digital (of 1 avail 1)
[SIZE=3][B]2011/07/06 14:01:08 2B17D4B0 h unauthorized access from 127.0.0.1 flag 1
[/B] [/SIZE]
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Jul  6 14:01:13 2011
-------------------------------------------------------------------------------
2011/07/06 14:01:13 2AAC78D0 s >> OSCam <<  cardserver started, version 1.00-unstable_svn, build #5517 (mips-tuxbox-linux)
2011/07/06 14:01:13 2AAC78D0 s version=1.00-unstable_svn, build #5517, system=mips-tuxbox-linux, nice=-1
2011/07/06 14:01:13 2AAC78D0 s client max. idle=120 sec, debug level=0
2011/07/06 14:01:13 2AAC78D0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/07/06 14:01:13 2AAC78D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 14:01:13 2AAC78D0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/07/06 14:01:13 2AAC78D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/07/06 14:01:13 2AAC78D0 s signal handling initialized (type=sysv)
2011/07/06 14:01:13 2AAC78D0 s 82 service-id's loaded in 1ms

Today I flashed PLI 2.0, just to check if the freezings were there too.
But no freezings with PLI image.
Too bad it was no doubletuner function (rec one channel and look live on another) in PLI.

Regards beson

hi mate,

looking at you log from osacam the problem lies with your oscam config you need to allow access to webif for ip '127.0.0.1' please add it to the list of allowed ip, or turn off Softcam timer check in Softcam Manager by pressing 'MENU' the setting it off.

 

[beson]

Hi andyblac, and thanks for your answer.
I have access for ip 127.0.0.1 in webif.
I will try to turn off softcam timer, and see if it helps.
I wonder why I have no problems with this in PLI 2.0

beson

 

[Stanman]

Vix has built in checker so if the cam is turned off it will reboot it, that is why u are getting the error message as it needs webif to check the cam.

 

[pooface]

Hi, How do I make AC3 default audio settings on this image as all the channels are on narrative mode?

Thanks

Actually, it's menu- > setup -> auto language -> prefer ac3

Sent with Tapatalk

 

[beson]

Vix has built in checker so if the cam is turned off it will reboot it, that is why u are getting the error message as it needs webif to check the cam.

I don't understand why oscam is turned off exactly every 6th minute, and has to be rebooted.

beson

 

[wii89]

Actually, it's menu- > setup -> auto language -> prefer ac3

Sent with Tapatalk

I don't have auto language -> prefer ac3 on my menu

 

[punisher]

Its in menu/setup/system/auto language selection