AB-Com PULSe 4K SE only £99! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K SE only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
AB-Com PULSe 4k Rev II Twin tuner only £149! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

VU+ Zero Software update

M

Mike j

New member
Joined
May 1, 2016
Messages
10
Reaction score
0
Points
0
Unable to carry out Software Updates so finally did a Factory reset and still unable. Can anybody help. Many thanks from a raw newbie.
Feeds are down for maintenance is the message.
also posted in wrong forum. Doh
 
Last edited:
Hi Can you point me in the right direction to an image to use and the best way to do this as I believe saving files is too late. Before I did the Factory reset the message was that the stb needed reformatting.
Thanks for the help
 
Use the Image Manager to couch flash your receiver. Download the latest image (5.0.025) from Blue Button > ViX > Image Manager & then press the Yellow Button (Downloads), highlight the latest image & press the Green Button to download. Once the download is completed, press the Red Button to close the download box and then highlight your downloaded image & press the Blue Button to Restore. Simples!!


Sent from my iPhone using Tapatalk
 
Andy_Hazza said:
Use the Image Manager to couch flash your receiver. Download the latest image (5.0.025) from Blue Button > ViX > Image Manager & then press the Yellow Button (Downloads), highlight the latest image & press the Green Button to download. Once the download is completed, press the Red Button to close the download box and then highlight your downloaded image & press the Blue Button to Restore. Simples!!


Sent from my iPhone using Tapatalk
Click to expand...

Keep getting the message there is a problem with the device, please reformat. Does this suggest that the stb needs renewing? Thanks
 
faulty usb drive or external hdd powered with recordings,as a format will erase data.
if its a usb used for epg only then you can reformat it again on box and ext3 -ext4. that allows the usb to be used with box.
 
No USB or hdd has been used so would this suggest the fault lies within the stub itself?
 
Mike j said:
Hi I assume the image is Virtuosso Image Xtreme
Click to expand...

Assuming isn't good enough. Providing the proper Image Details is the correct way. Press Menu > Information > About. The latest ViX image (as of 19.08.17) is 5.0.025


Sent from my iPhone using Tapatalk
 
Hi I have downloaded the latest 5.0.25 and opened it on the desktop and copied to a USB stick. Image on the stb is dated 2015-03-25 so many image updates since then. Not certain which number is the Vix image detail can you tell me if it is Kernel 3.13.5 Thanks
 
Last edited:
Save any important files, flash/install the most recent image which you have already downloaded.
 
Beginning to become a headbanger. USB is obviously being recognised as internal light flashes but will not trigger download to Zero in either USB port. Tried a freshly formatted FAT32 USB and still not recognised. Thanks for the help.
 
Hi Image Manager with the USB installed lists all the latest images, the zero is connected to the internet, selecting the latest 5.0.025 brings up the screen Downloading Image.
Execution progress: does not show any progress but ViX is scrolling. What length of time should flashing take? It has been on this screen for 10 minutes, not the 2-4 mins in the manual.
Not convinced it is cracked, but got a lot further than earlier. Many thanks.
 
Screen changed. Brings up the list of latest images and asks which image to install again. Selected latest image to download again.
 
Hi Looks like we have cracked it, setting up now. Many thanks
 
You must log in or register to reply here.

OpenViX Feeds Status

Back
Top