[ET9x00] New VIX Image ET 9x00 Series Version 2.4 15/05/2012 - DISCUSSION ONLY -

[destroyer2usa]

1. ecm times..in magic HD it is in 2nd infobar. In magic HD Night ii is in first infobar
Also you setup in OSD settings use of one/two lines, depending on skin u use

2. you can save your city with the blue coloured buttons

Thanks for the fast reply. Regarding 1: Have that set to two lines and see no ecm times...gonna switch to one line see what result that gives.

Regarding 2: How simple a answer can be.

Thanks again.

 

[copex]

the timer button on the remote no longer works?

any way to re-map it?

 

[Larry-G]

the timer button on the remote no longer works?

any way to re-map it?

which timer button ? if you mean the green button to view timer's and auto timer's it was working fine for me last night on the Ultimo with the ViX Night HD skin and ViX 2.4-108 ( not released yet ).

 

[Stanman]

Timers work fine on release image, short green will take you to timer and long green to autotimers, it may not work if you have a third party remote as on my harmony 885 short green works but not the long green and I have to go through the menu option to get there

 

[wii89]

Love the new image

Keep up the good work!

 

[Boile]

Hi!
Great Image!!!
The timer and the GREEN button on the remote no longer works.(Xtrend 9200,Vix 2.4 build101)

Boile

 

[Rob van der Does]

The timer and the GREEN button on the remote no longer works.(Xtrend 9200,Vix 2.4 build101)

What do you mean by 'timer'?
Green works fine here on ET9200 (opens timer list).

 

[Boile]

Yes, Open the Timer List works only over menu, "Green-long" works properly

Boile

 

[Rob van der Does]

Hmm, are you sure the R/C is OK? Can you try other short-green functions (e.g. plugin download) to see if that works?

 

[Boile]

Yes, I´m sure! Look at post 22.
I have two remotes, With Vix 2.3 was the TIMER BUTTON ok. The auto timer(green long) works

 

[Rob van der Does]

Not sure what happened then. Works fine here (on ET9200 on 2.4-101).

 

[Boile]

Hi!
I got it!
It was my backup Vix 2.3.
Thanx

 

[copex]

yes the remote has a button marked Timer under the timeshift button, before upgrading to the newest ViX pressing the timer button would take you to the timers same as pressing the green button.

et5000 has the same button and the same issue.

 

[No.Trace]

Hi ...

hbbtv works now ... but first after i installed the et-webrowser ...
but the "left"button closes the hbbtv ...

CU No.Trace ....

 

[wii89]

When I install net nfs the box crashes, is there a way to fix it?

 

[Sicilian]

When I install net nfs the box crashes, is there a way to fix it?

It dont crash the receiver reboots after installation and the installation of NFS can take upto 20mins.

 

[river-rat]

tried a new usb stick, as well as a old ps3 hard drive via usb and not seen by the box

also if i do it via software update on vix, it stops half way to a error nothing to nothing to upgrade?

 

[river-rat]

ok downloaded from another site and flashed

 

[et9k]

i'm trying ViX-2.4.119-et9x00_usb.zip, i have the right bootloader installed (i've had vix 2.3 till 2 hours ago), i'm stuck on booting (vfd) and openvix "gray" loading background, from time to time it "loads" something and the spinning vix icon appears on the upper left corner and a little dot on vfd just on left of Booting..., then both disappears again and NOTHING happens, help.

I have a ct-et9000

 

[Rob van der Does]

i'm trying ViX-2.4.119-et9x00_usb.zip, i have the right bootloader installed (i've had vix 2.3 till 2 hours ago), i'm stuck on booting, from time to time it "loads" something and the spinning vix icon appears on the upper left corner, then disappears again, help.

Best is to telnet:

init 4
enigma2

and the see what's going wrong in the telnet output.