AutoBouquetMaker released by ViX!

[abu baniaz]

Have you double checked your tuners are set correctly and are not occupied with a recording?

 

[Stanman]

lads,
im doing something wrong.
after setting up as required for my area(inc both sly and fta bouquets) and hitting scan
the bar fill to just under half way then I get error message TIMEOUT FOR TUNER LOCK
any ideas?
original vu duo latest vix installed

Do you have two cables connected or loopthrough?

If latter try disabling loopthrough and try again.

Also what version of the image are you on, as good idea to update to latest.

 

[boogie]

Have you double checked your tuners are set correctly and are not occupied with a recording?

hi really appreciate the reply.
not sure how to check tuners so please advise if you have a second.it would be appreciated.
no no recordings occurring.
I was watching sshd1 and it clearly says in the autobouquets description that if the other tuner is occupied it would use the first tuner.
and in the case of single tuner that it would skip to the scanner for a few minutes so to do it in a commercial break.
I tried to switch to the other tuenr but it seems to be blank.
maybe this is confusing the plugin

THANKS for your help thus far

HAPPY HOLIDAYS EVERYONE!

 

[Stanman]

Menu>setup>services>tuner configuration

 

[boogie]

Do you have two cables connected or loopthrough?

If latter try disabling loopthrough and try again.

Also what version of the image are you on, as good idea to update to latest.

latest build mate.
no loopthrough not enabled on either tuner afaics.
thanks for your help.its appreciated greatly

I must be doing something wrong but not sure how to fix.leaning towards the second tuner not working(for what ever reason) and thius confusing the plugin.
bloody love the vix image.best image ive ever used on any box bar none.

 

[Stanman]

Do you have two cables?

if not follow the post either way above yours and disable second tuner

 

[boogie]

Do you have two cables?

if not follow the post either way above yours and disable second tuner

THAR SHE BLOWS!!!!!!!!
clearly the second tuner not getting feed(****ed wire maybe?)so was confusing plugin which must have wanted to switch to it as I was watching tuner A.

THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! absolute legend.cheers again

 

[Stanman]

When you get time, have a look at the F connector especially if its the sly dual cable as f connectors have a habit IME of working lose, might just need to tighten it up.

You can also disable the first tuner and go into satfinder to see if there is a signal coming down, if not than its either connections either end or the cable.

 

[antochia]

the plugin resolve all problems about multi-channel trasponder because take the right one; in fact some channels are presents on more tp but only one is correct to wacth. thanks

 

[abu baniaz]

Yippee!!
Dbedit 5.1.1.0 receives the settings. Still with errors though. No joy with Dreamset still.

EDIT: Dreamset will open the bouquets from a saved file once received and saved with DBedit.

 

[digidude]

ive installed this on numerous receivers using lots of different images, and while it will install, and allow me to set up everything, when it comes to actually running the scan, the menus are disabled and only the 'About' screen is selectable. Could this 'block' be removed?

 

[judge]

ive installed this on numerous receivers using lots of different images, and while it will install, and allow me to set up everything, when it comes to actually running the scan, the menus are disabled and only the 'About' screen is selectable. Could this 'block' be removed?

There is no block in the code, it's opensource & available on the git server.
If it doesn't work on other images, maybe point them in the direction of the code & ask them to have a look?

 

[Larry-G]

ive installed this on numerous receivers using lots of different images, and while it will install, and allow me to set up everything, when it comes to actually running the scan, the menus are disabled and only the 'About' screen is selectable. Could this 'block' be removed?

i already told you contrary to your beliefs there is no code in the plugin to block it from working on any image.

 

[Rob van der Does]

l...... the menus are disabled and only the 'About' screen is selectable. Could this 'block' be removed?

Hehe, the very idea of 'a block'

 

[digidude]

i already told you contrary to your beliefs there is no code in the plugin to block it from working on any image.

Hehe, the very idea of 'a block'

the subject has been approached a few times in different threads across a few forums, but, the answer has always either been riddles, or completley ignored, so i thought id ask straight.

Ive installed the .py files on numerous receivers using numerous images, and anything thats NOT the ViX image, out of everything ive tried, will only allow you to select the about screen, which stops you from running the plugin on any other image, but still allows you to see the screen saying where its come from

 

[garyblas]

Question: If want to try auto bouquet but am currently very happy with my own. If i load auto bouquet i assume it will duplicate many of my own as i have multiple bouquets enabled?
Can i mix and match some channels?
Can i delete channels i dont want?
Is this compatible with DBEdit?

 

[judge]

the subject has been approached a few times in different threads across a few forums, but, the answer has always either been riddles, or completley ignored, so i thought id ask straight.

where? i'd love to see those riddles.
sounds like you just need to add screens to the skin of the image you're using, but I can't be sure as I don't use them.

 

[jaylar]

I been having problems where for instance movies its giving the wrong info for what's on. I press ok it and its a differrent movie .

 

[mcquaim]

I been having problems where for instance movies its giving the wrong info for what's on. I press ok it and its a differrent movie .

That won't have anything to do with ABM, that info comes from your EPG data. Where ever you are pulling this from must be incorrect for that channel or a schedule change has been made since you last downloaded your EPG data..

 

[Rob van der Does]

That won't have anything to do with ABM, that info comes from your EPG data. Where ever you are pulling this from must be incorrect for that channel or a schedule change has been made since you last downloaded your EPG data..

Indeed, and on pressing OK the Now/Next data from the transponder is being displayed instead of the data stored by the box.