motorised no 2nd tuner problem

[dwarf]

Have you tried the above then or are you clarifying that your using a quad LNB on a motorised dish?

 

[sjmc]

Both . i have tried all suggested settings on a quad lnb motorised dish and no joy.
ill try another day day
cheers

 

[Rob van der Does]

set up up tuner B, the loopthrough only works on tuner A

Not correct: loopthrough can work in both direction.

In vix would you not set the tuner to "second cable of motorised LNB"

Depends: if there are indeed two cables (i.e. a motorised twin/quad LNB) the 'second cable' would be correct. And there is nothing VoX-specific in this area: it's all about default Enigma-functionality.

Both . i have tried all suggested settings on a quad lnb motorised dish and no joy.
ill try another day day

Not sure why you keep on talking about a 'quad'.
You have a motorized quad-LNB?
If so: are there indeed more the 1 cable coming from it?
If so: make sure you use the cable that runs through the motor.

Anyway: connect the cable that goes to the motor to tuner A and set tuner B to loopthrough. That works for sure.

 

[Alec]

2 inputs from one LNB on a Motorised dish and A, is tuned only on Duo, Tuner B second cable of a motorised LNB Tuner A, but I always have mine configured in advanced. The only way you know it is working properly is when you record on different transponders. You could test each input by connected only one each time in the the tuned input. If they each work in turn then it is probably a configuration, or software problem

 

[Rob van der Does]

2 inputs from one LNB on a Motorised dish and A, is tuned only on Duo, Tuner B second cable of a motorised LNB Tuner A,

OK, clear.

but I always have mine configured in advanced.

Makes no difference.

The only way you know it is working properly is when you record on different transponders. You could test each input by connected only one each time in the the tuned input. If they each work in turn then it is probably a configuration, or software problem

Nope there are more ways:
1- Use the embedded SatFinder for both tuner;
2- Set 'preferred tuner" (normally set to 'Auto') to 'tuner B' and watch live-TV on several satellites. Do the same for 'Tuner A'. Don't forget to reset to auto.