VIX Team Vu Duo Image v1.2 - 01/11/2010

[satmanbasil]

vix update

Hi m8s

Things just get better like the improvement seems to load a wee bit faster too

One problem i found that may need addressing ... my box is connected by hdmi cable only when i installed the iamge via the usb on booting up i had a blank screen with vu duo on the front display I remembered this happen before so plug in a scat lead and was able to change from scart to hdmi.
Not so sure how many user would be using a HD with scart cable so can you tweek the image so future updates start with HDMI instead lol saves many thinking the image is duff sitting about looking at a blank screen. Apart from the gripe oh and lets be professional lads at the end of the wizzard setup it still says your "Dreambox" is now ready to use Lmao can u change it?



regards
basilsatworld

 

[andyblac]

Hi m8s

Things just get better like the improvement seems to load a wee bit faster too

One problem i found that may need addressing ... my box is connected by hdmi cable only when i installed the iamge via the usb on booting up i had a blank screen with vu duo on the front display I remembered this happen before so plug in a scat lead and was able to change from scart to hdmi.
Not so sure how many user would be using a HD with scart cable so can you tweek the image so future updates start with HDMI instead lol saves many thinking the image is duff sitting about looking at a blank screen. Apart from the gripe oh and lets be professional lads at the end of the wizzard setup it still says your "Dreambox" is now ready to use Lmao can u change it?



regards
basilsatworld

i'll take a look

 

[Sicilian]

Loads no problem here with HDMI.

 

[kunio]

Ohh thanks for this superb image

 

[numind]

Hi, could someone tell me where the scripts stay in this version?? I am trying to run sbox but it doesn´t work after downloading, I need to insert sbox.conf and I don´t know where, normally I put in usr/bin/..

Thx

 

[guff daddy]

Online update went ok - just a note that it didn't keep the CrossEPG provider...

Well I thought it went ok, but later today I installed the HD Glass skin and then noticed I couldn't run Autotimer from the long green button - it said the Autotimer plugin wasn't installed (although it ran OK from CoolEPG).

I went to uninstall and reinstall it - uninstalled OK but wouldn't reinstall (from Setup/Software Manager/Manage Extensions).

So, I decided to reinstall VIX 1.2 from scratch - went OK except I wasn't able to restore my settings (I got tuning failure on every channel) - no problem, I reinstalled from DreamBoxedit and had all settings except there was no CCcam installed - and I was unable to install from Plugins (No Downloadable Plugins available)

Hmmm... I had backed up 1.1 so I tried restoring that from the menu, but it didn't work (VU+ just hung on "Starting") so I stuck the 1.1 backup on a USB, reinstalled it and rerun the update. Seemed OK (except once the update was finished you need to reboot immediately - I didn't and it greenscreened on the next menu). Rebooted, reupdated and immediately rebooted and now all seems OK.

Certainly not as hassle free as previous updates...

 

[cbr900]

I am trying to install this image using the usb with no luck...it keeps geting green screen...starting engma and then green screen....

help

 

[Sicilian]

I am trying to install this image using the usb with no luck...it keeps geting green screen...starting engma and then green screen....

help

Re-download the USB update image and try again.

 

[rockerduck]

For those upgrading online from 1.1, could be useful to launch the update again after reboot.
My stb upgraded 35 packets the first time then 2 packets the second time...

 

[Palinkat]

Thanks for that rockerduck,

Did the online update once and then twice to get 3 more packages. All my settings, bouquets, cccam (had to restart), swap (had to reactivate) were kept. Just had to re-enable RyVix as extension, that's pretty much it.
Tried the GhostHD skin as I loved in on DE but time/date displays in Russian as previously posted somewhere else.

Many thanks to the VIX team!!!!

 

[koyote_0942]

the providers should be above that info see attached pic, 'BSkyB'

ok but I use skin DMConcinnity -HD does not come information provider

 

[andyblac]

ok but I use skin DMConcinnity -HD does not come information provider

ah ok, i'll take a look.

 

[cbr900]

I just installed the image...I want to access it using ftp client "flashfxp" but I can not access it

what is the username and pass and port?

help

 

[glenn650]

I think you should login with root as login and no password filled in (if you havent added one) port should be 21 (is normal port) I use filezilla and logged in without a hitch. Maybe this helps?

 

[cristo4]

Hello guys and big thank you for your hard work!
I'm new here and new using VIX image, just flashed it 2 mins ago...and my first silly question is: where is Softcam manager? Where can i found it? Or ha can i download softcams via your feed? Can't wait to use it...

 

[glenn650]

Ok i forgot to mention you should also check the box ip address, all depends if you set that up manually or had the DHCP do that for you

 

[numind]

please, help for installing sbox plugin, when I install from server, it doesnt work..where should I put .conf and .mips files??? many thxs.

 

[t.ph]

Hello guys and big thank you for your hard work!
I'm new here and new using VIX image, just flashed it 2 mins ago...and my first silly question is: where is Softcam manager? Where can i found it? Or ha can i download softcams via your feed? Can't wait to use it...

Try pressing the MENU button & you will see PLUGINS, press SYSTEM & you will find SOFTCAM.
The colour buttons listings are in the first post of this thread.

 

[t.ph]

please, help for installing sbox plugin, when I install from server, it doesnt work..where should I put .conf and .mips files??? many thxs.

Check this out: http://www.vuplus-support.co.uk/showthread.php?2890-Sbox&highlight=sbox

It looks like the poster has sorted it out himself

 

[cristo4]

Try pressing the MENU button & you will see PLUGINS, press SYSTEM & you will find SOFTCAM.
The colour buttons listings are in the first post of this thread.

Done that mate already, but when i press Download plugins i get the message: No new plugins found!!!
The internet connection is ok,up and running....