VIX Team Vu Duo Image v1.2 - 01/11/2010

[t.ph]

Done that mate already, but when i press Download plugins i get the message: No new plugins found!!!
The internet connection is ok,up and running....

Try doing an online software update again and make sure you reboot after

 

[Sicilian]

Done that mate already, but when i press Download plugins i get the message: No new plugins found!!!
The internet connection is ok,up and running....

You need to run a software update.

 

[andyblac]

please, help for installing sbox plugin, when I install from server, it doesnt work..where should I put .conf and .mips files??? many thxs.

you should only need the conf files and i think there go in etc/keys

 

[tomthebomb1968]

Thanks for the update guys. Just one thing I noticed so far. I did the on line software update and the update completely overwrites your current channel settings list. I think its the Catseye settings that it has installed. Not a major hassle but get a backup of your own settings saved before updating.

Also could CCcam 2.13 be kept in the cams downloads? Works best with my setup

 

[t.ph]

What it does is updates with the latest Catseye settings. If you have backed them up first then you can just reload the file you had.

 

[andyblac]

Thanks for the update guys. Just one thing I noticed so far. I did the on line software update and the update completely overwrites your current channel settings list. I think its the Catseye settings that it has installed. Not a major hassle but get a backup of your own settings saved before updating.

that must have been because you installed it from the feeds, and v1.2 feed has the latest one in it 22-10-2010, so if you changed it, it will get overwritten when he creates a new version

 

[underzone]

In the VIX menu, you can't seem to create a USB swapfile bigger than 64MB (v1.1 allowed upto 256MB)... Isn't this a bit small?

 

[dfdream]

Andy one question. I did online update to v1.2 and all went fine except one thing.
The smargo reader that was fine in 1.1 now says unknown or no card in entitlements.
I see that there is a smargo plugin in downloads.
Do I now need to install this to get the smargo installed.
Has the update changed something on the manual smargo driver I had installed.
Im recording a few programs and cant reboot so I said Id post here in the meantime.

Thanks

D

 

[andyblac]

In the VIX menu, you can't seem to create a USB swapfile bigger than 64MB (v1.1 allowed upto 256MB)... Isn't this a bit small?

no 64mb is quite large enough

 

[andyblac]

Andy one question. I did online update to v1.2 and all went fine except one thing.
The smargo reader that was fine in 1.1 now says unknown or no card in entitlements.
I see that there is a smargo plugin in downloads.
Do I now need to install this to get the smargo installed.
Has the update changed something on the manual smargo driver I had installed.
Im recording a few programs and cant reboot so I said Id post here in the meantime.

Thanks

D

have a look in '/lib/modules/2.6.18-7.3/kernel/drivers/usb/serial' if you dont see a file called 'ftdi_sio.ko' then install the extension, it is installed the the new image as default, but it might not be on an upgrade.

 

[tomthebomb1968]

:

that must have been because you installed it from the feeds, and v1.2 feed has the latest one in it 22-10-2010, so if you changed it, it will get overwritten when he creates a new version

I had my own tailored Likra settings on the box and selected the update software from the Software Management tab. After the update Catseye was on. Think I will keep em on too lol.

Also I have had a couple of green screens. This was brought on by rapid button pushes while in a bouquet. I did the same thing again just to see if it would happen again and it did. Im running the Ghost skin, has anyone else had this happen with another skin?


Your making this box a real pleasure to own and use guys
:smiley_yup:

 

[andyblac]

:

I had my own tailored Likra settings on the box and selected the update software from the Software Management tab. After the update Catseye was on. Think I will keep em on too lol.

Also I have had a couple of green screens. This was brought on by rapid button pushes while in a bouquet. I did the same thing again just to see if it would happen again and it did. Im running the Ghost skin, has anyone else had this happen with another skin?


Your making this box a real pleasure to own and use guys
:smiley_yup:

please post you crash log's

 

[fintannl]

thanks guys, strange thing with me was when i did the software update all looked good. so i waited a while for channels to appear, no sign. then i pressed blue button and select cccam info and got web page error. so then i selected menu, setup, vix and softcam and selected cccam 2.1.4 and also put it to autostart (note my original softcam was not visible, in fact there was no softcam noticeable in this field). still no response. so then i selected menu, standby/restart and restarted. then all ok. weird

 

[optip]

Hi Guys,

thanks for the update!

I did an online update from 1.1 and all went very smoothly... had to reconfigure CCCam to autostart after the upgrade but a flawless update for me! I love the new feature where autotimers added from CoolEPG automatically scans the epg now...very sweet!

thanks for all the effort!

 

[underzone]

no 64mb is quite large enough

OK, its just that I have got a 4GB pen drive permanently stuck in the back of my box. I thought it might be good to use a larger size... seeing as the drive is much bigger and doing nothing.

 

[paul362]

Just a side note ! I updated online from 1.1 to 1.2 and had no problems whatsoever (although i did have to reactivate cccam) also all my channel lists stayed the same as well ! (im using our own VU-support list) so im well impressed @ the mo.

 

[andyblac]

OK, its just that I have got a 4GB pen drive permanently stuck in the back of my box. I thought it might be good to use a larger size... seeing as the drive is much bigger and doing nothing.

the swap it is only used when needed, ie when you run extra plugins, the main program enigma2 does not use swap memory

 

[pinkpanther_188]

Hi, I installed V1.2 this morning and installed an unsupported cam called SPCS (Nasscamd), it installed without problems and I could configure it from the plugin menu, I copied the bin file (spsc) to usr/softcam and I could see it in the softcam setup menu, however, it wont start when pressing the green button, I get an error message (I don't remember it now as I'm at work). How can I define a script that can properly start it?

P.S. it works fine when I start it manually from the command prompt.

 

[cbr900]

I think you should login with root as login and no password filled in (if you havent added one) port should be 21 (is normal port) I use filezilla and logged in without a hitch. Maybe this helps?

Now, using filezilla and I get:

=========================
Status: Connecting to 192.168.1.6:21...
Status: Connection established, waiting for welcome message...
Error: Could not connect to server
Status: Waiting to retry...
Status: Connecting to 192.168.1.6:21...
Status: Connection established, waiting for welcome message...
Error: Could not connect to server
========================

Can you help?

I tried telnet and I get:
===================
Connecting to 192.168.1.6....
Connection to host lost
===================

I am using win7

please help

 

[irishchris]

IrishChris, can you confirm the drivers still work on this new image? Still waiting for the stick to arrive from Germany

Ta

hi

yes can confirm that it works on vix 1.2 also. recorded movie on dvb-t last night while recording bbc hd on sat and watching itv hd on other tuner and worked perfect. was well impressed that it could handle 3 tuners working at same time without any slowdown