[VU+ Solo2] 760 build onwards

[Larry-G]

I'm sure that's just a typo & pheonix is using build 775.
None of us are going to downgrade to try and find issues.
Update & provide the logs or nobody can help.

yes i meant build 775 thanks for the correction mate.

 

[impoundeddog]

debug log attached guys
The main problem for me is the 3 minute freeze on booting , takes so log for the solo2 to boot up now

 

[judge]

debug log attached guys
The main problem for me is the 3 minute freeze on booting , takes so log for the solo2 to boot up now

You are using build 760, please update to 775, fresh flash if you have to & let us know then.

 

[impoundeddog]

sorry my bad judge , wrong image on the usb lol , will update then post new log

 

[impoundeddog]

ok 775 log attached , still have the same problems as in post 1 of this thread

 

[Red]

Ever so quite Mr. Mister

Im having the same problems as the guys above. A prompt reply on this would be appreciated

Thanks in advance

 

[Tkr001]

I have this problem on both Solo2 and Duo2. It seems to hang for ages displaying booting 57 and eventually kicks back into life.

 

[judge]

ok 775 log attached , still have the same problems as in post 1 of this thread

I don't use XMLTV, but you have quite a bit of:

[XMLTVImport] Parsing channels from 'http://www.ebook-directory.net/rytecxmlepg/rytec.channels.xml.gz'
[XMLTVImport] unlink /media/hdd/xmltvimport.gz
set rotor timeout to 360 seconds
child has terminated
pipes closed
[OnlineVersionCheck] 0 Updates available
poll: unhandled POLLERR/HUP/NVAL for fd 70(16)
set rotor timeout to 13 seconds
set rotor timeout to 26 seconds
set rotor timeout to 55 seconds
set rotor timeout to 73 seconds
set rotor timeout to 21 seconds
set rotor timeout to 55 seconds
set rotor timeout to 55 seconds
set rotor timeout to 21 seconds
set rotor timeout to 13 seconds
set rotor timeout to 11 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 25 seconds
set rotor timeout to 11 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 21 seconds
set rotor timeout to 21 seconds
set rotor timeout to 17 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 25 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 11 seconds
set rotor timeout to 11 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 26 seconds
set rotor timeout to 26 seconds
set rotor timeout to 21 seconds
set rotor timeout to 33 seconds
set rotor timeout to 11 seconds
set rotor timeout to 9 seconds
set rotor timeout to 11 seconds
set rotor timeout to 34 seconds
set rotor timeout to 20 seconds
set rotor timeout to 11 seconds
set rotor timeout to 11 seconds
set rotor timeout to 9 seconds
set rotor timeout to 21 seconds
set rotor timeout to 27 seconds
set rotor timeout to 9 seconds
set rotor timeout to 9 seconds
set rotor timeout to 49 seconds
set rotor timeout to 49 seconds
set rotor timeout to 49 seconds
set rotor timeout to 36 seconds
set rotor timeout to 36 seconds
set rotor timeout to 49 seconds
set rotor timeout to 9 seconds
set rotor timeout to 17 seconds
set rotor timeout to 11 seconds
set rotor timeout to 11 seconds
set rotor timeout to 13 seconds
set rotor timeout to 13 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 17 seconds
set rotor timeout to 9 seconds
set rotor timeout to 20 seconds
set rotor timeout to 13 seconds
[XMLTVConverter] Enumerating event information

No idea why or if this is causing it?

 

[impoundeddog]

so are you saying this is an xmltv issue ?
i use this for the epg as i find it more stable ?
what are the rotor timouts ?

 

[millfieldlad]

i,ve always used XMLTV for my epg with all my VIX images and have been great , why now is xmltv an issue ( not that it is as judge has already stated )

 

[judge]

sorry guys, you'll have to wait till someone more knowledgeable than me comes on to answer if that is even the issue.

 

[impoundeddog]

perhaps this is one for Andy to have a look at judge , any info would be much appreciated

 

[millfieldlad]

Have you had experience of this build pheonix ?

 

[mickyblueys]

Wind your neck in pheonix , ive already explained i dont know how to . So your philosophy in life is if you dont know about things to keep your mouth shut . Not a good approach.

Then why don't you read up and learn, like most others. I've currently got 2 boxes on 772 and not one problem.

Sent from my GT-I9100 using Tapatalk

 

[millfieldlad]

Then why don't you read up and learn, like most others. I've currently got 2 boxes on 772 and not one problem.

Sent from my GT-I9100 using Tapatalk

there is absolutley no reason for you to have a dig at me ( maybe you should speak to your mother and learn manners ) .. shut it till i decide to rattle your cage , then you can speak to me

 

[Stanman]

Time for evetyone to tune it down and absolutely no need to get personal, keep it civil folks.

 

[cactikid]

thought the point was to find a fault and fix it so everyone can benifit,looking at that log [ i know nothing ] so just looking a few unknown channels?so maybe a rytec issue?

 

[Sicilian]

Last warning, keep this civil guys.

 

[Rob van der Does]

I have this problem on both Solo2 and Duo2. It seems to hang for ages displaying booting 57 and eventually kicks back into life.

Please boot the box with the LAN-cable disconnected and see if that helps.
If not please disconnect any HDD (internal/external) and see if that helps.

 

[chaser]

I have this problem on both Solo2 and Duo2. It seems to hang for ages displaying booting 57 and eventually kicks back into life.

I have a Solo2 on 775 with exactly the same problem where the boot stalls at 57%. This on a machine with a clean post 760 install.

Please boot the box with the LAN-cable disconnected and see if that helps.
If not please disconnect any HDD (internal/external) and see if that helps.

I do use network mounts on this box, and have seen similar issues in the past if the remote share is not available, so I'll try this tomorrow and report back.