VIX Team Vu Duo Image v1.2 - 01/11/2010

[fintannl]

what i can say is that i changed back to cccam 2.1.3 but yes cccam continues to restart on a fairly regular basis. it doesn't seem to be a cccam issue. maybe the new enigma 2 drivers due for release later today will solve the problem?

 

[irishchris]

i dont understand how it could be enigma 2 problem as was working perfectly in vix 1.1 and all other images. just since monday since i updated to vix 1.2 it has begun restarting every few mins.

 

[fintannl]

As I understand it cccam has not changed though i can see from what andy says that cam management has changed dramatically. i assume the problem lies somewhere in there

 

[irishchris]

ah ok well if is hopefully is something andy can fix if anyone can andy can

 

[Hamram]

First of all, thank you for adding gbox! I'm just about to try a VIX image for the very first time, and thanks to this informative thread, I think I'm well prepared to any strange things happening during the process.

I did notice that someone had a problem when gbox was started, and I also saw that it was to be taken care of. Does gbox work now..? Maybe I'm a bit bold, but is there any chance for a working gbox for both tuners(twin)? In my old Relook I had to run two different gbox versions to get full twin-tuner action. I then could watch one channel, and record another. Unfortunally I don't have the needed skills to do this manually...

Being a newbie and all that, I'm almost afraid of asking, but since the subject is mentioned a few times in this thread, I thought I'd just give it a shot... Swap-file..? What is that, and how do I create one? I have a spare USB-pin, but in which USB port do I plug it, and how do I tell the tuner it's there?

 

[Etk]

I've updated from v1 and got all my settings, timers and things reinstalled. for some reason though I don't have any softcams installed though, if I go to softcam manager all the fields are blank and if I press anything other than red to close (such as autostart, stop/start) i just get a greenscreen. how do I reinstall cccam?

EDIT - found it! reinstalled via plugins and seems to be working fine

 

[NiTroGen]

About the CCcam restart issue... There is indeed a problem with the new Softcam Manager and its function that checks every 30 minutes if the cam is active, and NOT with CCcam itself. Here's my cam.check.log:

2010-11-04 23:29: CCcam.2.1.3 running OK
2010-11-04 23:29: CCcam process is present, now checking if CCcam is frozen
2010-11-04 23:29: CCcam is frozen, Restarting CCcam
2010-11-04 23:59: CCcam.2.1.3 running OK
2010-11-04 23:59: CCcam process is present, now checking if CCcam is frozen
2010-11-04 23:59: CCcam is frozen, Restarting CCcam

You can see that the new Softcam Manager, althought it sees that CCcam is running, for some reason it thinks it's frozen and restarts it. Anyway to disable this?

Btw, did anyone have any issues with other cams, or CCcam is the only one with the "freezing" problem?

And one other thing... With the new version 1.2, restarting of enigma2 also restarts active cam, which IMO should not be done!

Anyway, this is a great image and I really applause the guys behind it. Keep up the good work!!!

 

[fintannl]

indeed there is no better image. wonder if instead of full release that instead there is a beta release where a bunch of the vix fans get to play with the functions prior to a full blown release. it would save much of the stress and strain that andy has had to put up with with the release of this version. I know I'm as guilty as any in whining about things not working. am only too happy to join a beta testers group if its decided to be a good idea

 

[NiTroGen]

And I've just found out that disabling the Autostart stops restarting the cam every 30 minutes. So, there is our "culprit".

 

[fintannl]

brilliant, thanks

 

[fintannl]

can confirm that it works a charm now.

 

[Hamram]

Just wanted to say that I've managed to solve the swapfile-mystery, all by myself. Besides of that, I've been playing around, browsing the menus, zapping, editing the subtitle color, and stuff like that, and the only problems I've noticed is the green screen when I try to run gbox, and the fact that a warning text ("adult" movies are censored in Norway) alerting the viewer that this channel is censored, was stuck on the screen until I restarted the GUI. Not at all a big problem, but now you know. I think it was even worse in DE 1.3.3, by the way.

 

[fintannl]

please explain solution to swapfile. many users interetsed

 

[pooface]

About the CCcam restart issue... There is indeed a problem with the new Softcam Manager and its function that checks every 30 minutes if the cam is active, and NOT with CCcam itself. Here's my cam.check.log:

2010-11-04 23:29: CCcam.2.1.3 running OK
2010-11-04 23:29: CCcam process is present, now checking if CCcam is frozen
2010-11-04 23:29: CCcam is frozen, Restarting CCcam
2010-11-04 23:59: CCcam.2.1.3 running OK
2010-11-04 23:59: CCcam process is present, now checking if CCcam is frozen
2010-11-04 23:59: CCcam is frozen, Restarting CCcam

You can see that the new Softcam Manager, althought it sees that CCcam is running, for some reason it thinks it's frozen and restarts it. Anyway to disable this?

Btw, did anyone have any issues with other cams, or CCcam is the only one with the "freezing" problem?

And one other thing... With the new version 1.2, restarting of enigma2 also restarts active cam, which IMO should not be done!

Anyway, this is a great image and I really applause the guys behind it. Keep up the good work!!!

Dunno why you're getting them. Not got any frozen messages here...

2000-01-01 00:01: Couldn't find Oscam.1.00.3199 running, Starting Oscam.1.00.3199
2000-01-01 00:01: Couldn't find CCcam.2.1.3 running, Starting CCcam.2.1.3
2010-11-04 20:36: Oscam.1.00.3199 running OK
2010-11-04 20:36: CCcam.2.1.3 running OK
2010-11-04 20:36: CCcam process is present, now checking if CCcam is frozen
2010-11-04 20:36: Cccam is responding like it should
2010-11-04 21:06: Oscam.1.00.3199 running OK
2010-11-04 21:06: CCcam.2.1.3 running OK
2010-11-04 21:06: CCcam process is present, now checking if CCcam is frozen
2010-11-04 21:06: Cccam is responding like it should
2010-11-04 21:36: Oscam.1.00.3199 running OK
2010-11-04 21:36: CCcam.2.1.3 running OK
2010-11-04 21:36: CCcam process is present, now checking if CCcam is frozen
2010-11-04 21:36: Cccam is responding like it should
2010-11-04 22:06: Oscam.1.00.3199 running OK
2010-11-04 22:06: CCcam.2.1.3 running OK
2010-11-04 22:06: CCcam process is present, now checking if CCcam is frozen
2010-11-04 22:06: Cccam is responding like it should
2010-11-04 22:36: Oscam.1.00.3199 running OK
2010-11-04 22:36: CCcam.2.1.3 running OK
2010-11-04 22:36: CCcam process is present, now checking if CCcam is frozen
2010-11-04 22:36: Cccam is responding like it should
2010-11-04 23:06: Oscam.1.00.3199 running OK
2010-11-04 23:06: CCcam.2.1.3 running OK
2010-11-04 23:07: CCcam process is present, now checking if CCcam is frozen
2010-11-04 23:07: Cccam is responding like it should
2010-11-04 23:37: Oscam.1.00.3199 running OK
2010-11-04 23:37: CCcam.2.1.3 running OK
2010-11-04 23:37: CCcam process is present, now checking if CCcam is frozen
2010-11-04 23:37: Cccam is responding like it should
2010-11-05 00:07: Oscam.1.00.3199 running OK
2010-11-05 00:07: CCcam.2.1.3 running OK
2010-11-05 00:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 00:07: Cccam is responding like it should
2010-11-05 00:37: Oscam.1.00.3199 running OK
2010-11-05 00:37: CCcam.2.1.3 running OK
2010-11-05 00:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 00:37: Cccam is responding like it should
2010-11-05 01:07: Oscam.1.00.3199 running OK
2010-11-05 01:07: CCcam.2.1.3 running OK
2010-11-05 01:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 01:07: Cccam is responding like it should
2010-11-05 01:37: Oscam.1.00.3199 running OK
2010-11-05 01:37: CCcam.2.1.3 running OK
2010-11-05 01:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 01:37: Cccam is responding like it should
2010-11-05 02:07: Oscam.1.00.3199 running OK
2010-11-05 02:07: CCcam.2.1.3 running OK
2010-11-05 02:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 02:07: Cccam is responding like it should
2010-11-05 02:37: Oscam.1.00.3199 running OK
2010-11-05 02:37: CCcam.2.1.3 running OK
2010-11-05 02:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 02:37: Cccam is responding like it should
2010-11-05 03:07: Oscam.1.00.3199 running OK
2010-11-05 03:07: CCcam.2.1.3 running OK
2010-11-05 03:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 03:07: Cccam is responding like it should
2010-11-05 03:37: Oscam.1.00.3199 running OK
2010-11-05 03:37: CCcam.2.1.3 running OK
2010-11-05 03:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 03:37: Cccam is responding like it should
2010-11-05 04:07: Oscam.1.00.3199 running OK
2010-11-05 04:07: CCcam.2.1.3 running OK
2010-11-05 04:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 04:07: Cccam is responding like it should
2010-11-05 04:37: Oscam.1.00.3199 running OK
2010-11-05 04:37: CCcam.2.1.3 running OK
2010-11-05 04:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 04:37: Cccam is responding like it should
2010-11-05 05:07: Oscam.1.00.3199 running OK
2010-11-05 05:07: CCcam.2.1.3 running OK
2010-11-05 05:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 05:07: Cccam is responding like it should
2010-11-05 05:37: Oscam.1.00.3199 running OK
2010-11-05 05:37: CCcam.2.1.3 running OK
2010-11-05 05:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 05:37: Cccam is responding like it should
2010-11-05 06:07: Couldn't find Oscam.1.00.3199 running, Starting Oscam.1.00.3199
2010-11-05 06:07: CCcam.2.1.3 running OK
2010-11-05 06:07: CCcam process is present, now checking if CCcam is frozen
2010-11-05 06:07: Cccam is responding like it should
2010-11-05 06:37: Oscam.1.00.3199 running OK
2010-11-05 06:37: CCcam.2.1.3 running OK
2010-11-05 06:37: CCcam process is present, now checking if CCcam is frozen
2010-11-05 06:37: Cccam is responding like it should

Maybe your cccam is actually freezing!? Could be one of the settings or something?!

 

[pooface]

please explain solution to swapfile. many users interetsed

What is the mystery with the swapfile???

 

[mecit]

Meraba, vıx 1.2 img yükledim. Arkadaki USB 500gb HDD çalışmıyor. VIX 1.1 arkadaki USB 500 gb HDD çalışıyordu. Nedeni hakkında Cevap verirmisiniz.

 

[paul362]

Meraba, vıx 1.2 img yükledim. Arkadaki USB 500gb HDD çalışmıyor. VIX 1.1 arkadaki USB 500 gb HDD çalışıyordu. Nedeni hakkında Cevap verirmisiniz.

mmmmmmmmmmmmmm?

Not sure what the swop prob is as refered to earlier but my box automatically set my swop to 8M ?? how can i increase it please as i do not see an option (or it wont let me increase it) i have a 300gig hd and a 1gig flash-drive in my Duo.

 

[paul362]

vix1.2 img. Öndeki usb hdd açıyor. Arkadaki hdd açmıyor.

can we stick to english please.

 

[paul362]

Daha sonra kullanım google translate lütfen.

we use only English in this forum so please try to do this.

 

[mecit]

Img VIX1.2. Opens the front USB hdd. The rear does not open the hdd.