CCCAm Boxkey Help

[alimac2411]

Have you started oscam?

Also lemi - i had a look for doscam but seem to be finding versions linked with the BH image - i have Vix

 

[satmanbasil]

Hi

Another possible work around to get you sky card to work would be to seek out one of the old Thompson sky receivers and do an online pairing with the box if you get unable to do trying to pair this way then ring sky CRS and tell them your normal receiver is down and you need to match it to the old Thompson receiver but dont insert the card into that receiver.
There are rumours that sky maybe trying to close down this loop hole but not on mine.

 

[alimac2411]

Thanks Satmanbasil - good info - i will try that if i have no joy with what i'm currently trying!

 

[timofee]

You need to get back to basics. Even if your Ѕky card has been paired you can clear FTV channels like ITV2 HD or Channel 5 HD. From what I have read above you have not got that far yet - please correct me if this is wrong.

I suggest you go back to CCcam and get it working. Then Check what CCcam Info says (press blue button to see CCcam Info) - line 8 entitlements will tell you if CCcam is recognising your card. Once you have FTV channels clearing you can work through some of the above good ideas to see if you can get any of your premium channels.

 

[alimac2411]

You need to get back to basics. Even if your Ѕky card has been paired you can clear FTV channels like ITV2 HD or Channel 5 HD. From what I have read above you have not got that far yet - please correct me if this is wrong.

I suggest you go back to CCcam and get it working. Then Check what CCcam Info says (press blue button to see CCcam Info) - line 8 entitlements will tell you if CCcam is recognising your card. Once you have FTV channels clearing you can work through some of the above good ideas to see if you can get any of your premium channels.

Tried that timofee - yes i have FTV channels working no problem, just the premium that isn't working....as you advised i went to entitlements and is says ' no or unknown card inserted' - thanks

 

[lemi]

Also lemi - i had a look for doscam but seem to be finding versions linked with the BH image - i have Vix

Image doesn't matter....But,I suggest you do what "timofee" said.It's a good advice :thumbsup:

 

[alimac2411]

Image doesn't matter....But,I suggest you do what "timofee" said.It's a good advice :thumbsup:

Tried it lemi - still the same scenario

 

[alimac2411]

So i'll copy and paste from chasers guide the exact code i put in for oscam to create the oscam.conf file...

oscam.conf
Code:
[global]
logfile = /media/hdd/oscam/log/oscam.log
disableuserfile = 0
nice = -1
maxlogsize = 50
preferlocalcards = 1
usrfile = /media/hdd/oscam/log/oscamuser.log
emmlogdir = /media/hdd/oscam/log/emm/
lb_mode = 1
lb_nbest_readers = 2
lb_reopen_mode = 1
failbantime = 10

[cs357x]
port = 12345

[newcamd]
port = 12346@0963:000000
allowed = 1.0.0.0-255.255.255.255
key = 0102030405060708091011121314

[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = mubbashir
boxtype = dm7000

[webif]
httpport = 12347
httpuser = mubbashir

I never created an oscam.server or oscam.user file as i'm interpreting from the guide they should only be created if you're using a flash drive, i'm using a HDD...
I then put my ip address in the browser and it opens in webif, the guide then states to add port 12347 to the address, this is where my process fails as it then states address can't be found - any advice anyone?

 

[judge]

no or unknown card inserted

You need to fix that first. Card in the correct slot? facing the right way up?

 

[alimac2411]

You need to fix that first. Card in the correct slot? facing the right way up?

Ok so i have the card oin the top slot, my message is sci0 - no or unknown card inserted
Sci1 handled 0 ecms and 0 emms, NDS Card ******* and then theres various entitlement info lines...does this seem ok?

 

[judge]

Sci1 handled 0 ecms and 0 emms, NDS Card ******* and then theres various entitlement info lines...does this seem ok?

Yes. You sure the card hasn't expired or been paired? What channels does it currently clear?

 

[chaser]

Hi Chaser and thanks for the help. I've been following your detailed guide....it feels like i'm maybe getting somewhere
I copied your code exactly to create the oscam.conf file, i didn't amend the ip address in the code as mine is in the 192.168.x.xx - was i correct there?
I did use notepad++ as well.
When i open webif, i put in my ip address and get my box no problems, but when i add port 12347 to the address as instructed i get the message that the page could not be found.
Also, i did not create the oscam.server or oscam.user files as i'm using the internal HDD, from reading that guide my understanding is that i'd only need to do that if i was using a USB stick, please correct me if i'm wrong there - thanks a lot

Sorry for the delay in getting back to you. If you're unsure what needs to be configured then for simplicity you really should just add the oscam.server and oscam.user files. My comments about USB / HDD were related to some of the lines in the oscam.conf file.

However, if you feel confident, and you've created the oscam.conf file, started oscam from your remote, and can access oscam from your web browser, then you will be able to create the oscam.server and oscam.user files from the oscam web interface.

 

[chaser]

Ok so i have the card oin the top slot, my message is sci0 - no or unknown card inserted
Sci1 handled 0 ecms and 0 emms, NDS Card ******* and then theres various entitlement info lines...does this seem ok?

Does this mean you can now access the oscam web interface?

 

[alimac2411]

it gets FTA sky channels but not the HD ones, nor the sports / movies, kids channels etc...my card hasn't expired as i take it out and put it into the Sky HD box still, since i amn't getting the channels on the solo 2...maybe it's just the sky encryption that's the problem

 

[alimac2411]

Does this mean you can now access the oscam web interface?

yes i can access the oscam interface via my ip address, it just fails at the bit where i input the port after the ip address - i'm assuming webif is the interface, and yes i have oscam plugin installed in the cam manager section

 

[chaser]

yes i can access the oscam interface via my ip address, it just fails at the bit where i input the port after the ip address

I don't really understand that. If you don't add the port number, then you would normally just land at the OpenWebIf page. Do you have the line httpport = 12347 in your oscam.conf file? And what is the IP address of your box?

Edit: I also notice from your earlier post that you only have 2 lines in the [webif] section. You should have more than that!

[webif]
httpport                      = 12347
httpuser                      = mubbashir
httppwd                       = abc123
httptpl                       = /media/hdd/oscam_picons
httprefresh                   = 10
httphideidleclients           = 1
httpshowpicons                = 1
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.0.255

Edit 2: no. OpenWebIf is not the OSCAM interface. It's the general box interface.

 

[cwebb66]

Thanks for the info - i've had a look at the boxkey thing, the missus has made me put sky back in for the moment, she was getting annoyed with wathing nothing so will get the file prepared tonight and try it out as soon as i can...
Cwebb66 - how long has this issue gone on for, and any ideas about a potential workaround...

its been going for a while now it was like judge said the pairing to the sky box as they updated them

 

[alimac2411]

I don't really understand that. If you don't add the port number, then you would normally just land at the OpenWebIf page. Do you have the line httpport = 12347 in your oscam.conf file? And what is the IP address of your box?

Edit: I also notice from your earlier post that you only have 2 lines in the [webif] section. You should have more than that!

[webif]
httpport                      = 12347
httpuser                      = mubbashir
httppwd                       = abc123
httptpl                       = /media/hdd/oscam_picons
httprefresh                   = 10
httphideidleclients           = 1
httpshowpicons                = 1
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.0.255

Edit 2: no. OpenWebIf is not the OSCAM interface. It's the general box interface.

Thanks for helping - i'm thinking maybe this is beyond me, yes i have the httpport = 12347, and is it safe for me to put my own ip address on this forum?
i basically copied and pasted the code that you had put in your linked thread guide earlier, this is the code i copied from your guide...
Create the following files, and using FileZilla copy over to /etc/tuxbox/config:

oscam.conf
Code:
[global]
logfile = /media/hdd/oscam/log/oscam.log
disableuserfile = 0
nice = -1
maxlogsize = 50
preferlocalcards = 1
usrfile = /media/hdd/oscam/log/oscamuser.log
emmlogdir = /media/hdd/oscam/log/emm/
lb_mode = 1
lb_nbest_readers = 2
lb_reopen_mode = 1
failbantime = 10

[cs357x]
port = 12345

[newcamd]
port = 12346@0963:000000
allowed = 1.0.0.0-255.255.255.255
key = 0102030405060708091011121314

[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = mubbashir
boxtype = dm7000

[webif]
httpport = 12347
httpuser = mubbashir
httppwd = abc123
httptpl = /media/hdd/oscam_picons
httprefresh = 10
httphideidleclients = 1
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.0.255

 

[chaser]

If your IP address is in the private range (192.168.x.x) then it's safe to post. Make sure you copy over the oscam.server and oscam.user files too.

Don't give up! We'll get you there...

 

[alimac2411]

If your IP address is in the private range (192.168.x.x) then it's safe to post. Make sure you copy over the oscam.server and oscam.user files too.

it's 192.168.1.64 - should i add this into the code somewhere and yes i'll transfer those other files now as well, do both the server and user files go into the config folder as well?