Tappari's scanning issue thread

[tappari]

Before I upgrade, please tell me if this new release can do automatic scan in T2 mode with VU+ boxes?

 

[tappari]

What is happening during automatic scan:
ViX

Result

ATV

Result:

 

[abu baniaz]

You have not mentioned what the tuner and region settings you are using.

Compare the terrestrial.xml files and confirm that they are both the same. If they are not, the missing details can be added to the one without.

I have moved your posts to your own issue.

 

[tappari]

You have not mentioned what the tuner and region settings you are using.

Compare the terrestrial.xml files and confirm that they are both the same. If they are not, the missing details can be added to the one without.

I have moved your posts to your own issue.

With both images tuner is VU+ internal plug-in ssh108 C/T2. Tuner setup in both cases is: Europe,Middle East,Africa DVB-T-Frequencies.
Also OpenPLi can find T2 channels. And VTI. File terrestrial.xml is the same with all images.

 

[tappari]

Sorry, I forgot to mention. ViX image is Apollo 030.

 

[abu baniaz]

Upload the xml files from all images please, they should not be all the same. I dont think PLI track OE changes.

Where are you located?

 

[tappari]

I`m located in Finland, Helsinki area. I just flashed my Ultimo to Apollo 032. This time I used tuner setting: Suomi (fi) Europe DVD-T/T2. Suomi means Finland in Finnish language.Result is same as with Duo2. 39 channels found. I think it`s obvious that Vix can only do T scanning, not T2 in automatic scan mode.
If you are interested to compare terrestrial.xml`s:

 

[BoxFreak]

I`m located in Finland, Helsinki area. I just flashed my Ultimo to Apollo 032. This time I used tuner setting: Suomi (fi) Europe DVD-T/T2. Suomi means Finland in Finnish language.Result is same as with Duo2. 39 channels found. I think it`s obvious that Vix can only do T scanning, not T2 in automatic scan mode.
If you are interested to compare terrestrial.xml`s:

Might be an driver issue, as Venton HD3 finds all T/T2 channels without any problems (here in Helsinki area) with "Suomi (fi)" settings. I have seen similar problems with XTrend boxes, they only find either T or T2 channels depending on which transmission mode has been set to tuner. But not both).

 

[tappari]

Might be an driver issue, as Venton HD3 finds all T/T2 channels without any problems (here in Helsinki area) with "Suomi (fi)" settings. I have seen similar problems with XTrend boxes, they only find either T or T2 channels depending on which transmission mode has been set to tuner. But not both).

With VU+ ssh108 C/T2 tuner you have only two possibilities in tuner configuration for transmission mode: C or DVB-T2.

 

[abu baniaz]

Upload and PLI xml file.

 

[tappari]

Upload and PLI xml file.

I don`t have PLI on my boxes at the moment. Anyway, I think it`s better to concentrate to the fact, why openATV does automatic scan properly, but openVix does not.

 

[abu baniaz]

Automatic scan is working fine for me on T2 using Apollo 33. Has always done once the xml file was updated. Please see the video of it working. I should have shown the tuner config before the scan.

If you want your issue fixed on the Vix image, you might consider uploading logs comparing the processes on your images.

 

[tappari]

Seems to operate ok. But that is not VU+. So maybe it`s driverproblem. But drivers in openATV have the same date than ViX.

 

[abu baniaz]

Just saw your other thread.

Anyway, you have to do manual scan in Ultimo, scanning T2 transponders one by one.

Have you tried scanning with these settings.

 

[jjtr]

This is the change what OpenPli did in Enigma2:

"scan both DVB-T/T2 when 'system' is not specified in terrestrial.xml"

 

[abu baniaz]

I have noticed that the suomi section has constellation =2. May be an idea to try with =3 for automatic and may fair better.

 

[abu baniaz]

This is the change what OpenPli did in Enigma2:

"scan both DVB-T/T2 when 'system' is not specified in terrestrial.xml"

As in here

http://sourceforge.net/p/openpli/enigma2/ci/dc4498c8361646bff74b542a88e046f7b79fbc2d/

 

[tappari]

Just saw your other thread.

Have you tried scanning with these settings.

Yes I have. Scans only T-channels. Result 39 channels found.

 

[tappari]

I have noticed that the suomi section has constellation =2. May be an idea to try with =3 for automatic and may fair better.

"Europe T and Iceland T/T2" both have exactly same frequencies and bandwidths as "Suomi", but constellation=3. Both scan only T-channels

 

[rte]

Automatic scan is working fine for me on T2 using Apollo 33. Has always done once the xml file was updated. Please see the video of it working. I should have shown the tuner config before the scan.

If you want your issue fixed on the Vix image, you might consider uploading logs comparing the processes on your images.

In my Ultimo Apollo 035 automatic scan just causes a permanent waiting status.