Solo 2 remote very slow and doesn't respond

[Code2006]

Hi I have a major issue with my remote and it's annoying
Ever since I programed my remote to control my tv as well it's been really slow when using it to control the box
Now is doesn't even want to work 90% of the time
I tried new battery's so it's not that
I have tried all the vix images since 019 now 054
I hope there is a quick fix
Thanks

 

[abu baniaz]

In case you want to reset the configured TV set-up of your RCU.

1. Press 1 and 6 for three seconds until LED is on.
2. Press 9, 9, 6.
3. This will reverse the RCU into no configuration state.

 

[Code2006]

In case you want to reset the configured TV set-up of your RCU.

1. Press 1 and 6 for three seconds until LED is on.
2. Press 9, 9, 6.
3. This will reverse the RCU into no configuration state.

I have tried this so now the remote is back to normal ( doesn't control the tv) but still same problem
Lag

 

[sataday]

You say it was OK. Are you using the same TV as you were when the remote worked ok?

 

[Code2006]

When i had it on my samsung tv 2012 model it worked fine
About 2 months ago i had it set up on my panasonic plasma 2009 i think but i also set the remote to control the tv
The remote easnt as responsive but i could live with it
With in the last 2 weeks it got worst
Now its doesnt even want to respong 90% of the time
I reset the remote so it only controls the box snd flashed the latest vix 057 image

 

[Code2006]

Also went into settings and tried all 4 remote setting no luck i think it made it even worst[STRIKE][/STRIKE]

 

[abu baniaz]

Could it be a faulty remote? Are you able to use a universal/alternate remote to test this theory?

 

[v8rick]

plasma glare?? my remote works fine on lcd tv when its under LG plasma its awful.try putting tv in stanby then try remote mine works perfect.i left solo² in front room under plasma for Mrs to strugle with and got a duo² on lcd tv for me

 

[Code2006]

plasma glare?? my remote works fine on lcd tv when its under LG plasma its awful.try putting tv in stanby then try remote mine works perfect.i left solo² in front room under plasma for Mrs to strugle with and got a duo² on lcd tv for me

Is there not a fix for this?

 

[v8rick]

i think there has been a few posts about it iv'e not seen any fix except chage some settings on tv pic output. my m8 is a tv engineer and had never heard of it and until i
showed how it worked with plasma on standby or on a dark pic he didnt beleave it. does now though

 

[Code2006]

i think there has been a few posts about it iv'e not seen any fix except chage some settings on tv pic output. my m8 is a tv engineer and had never heard of it and until i
showed how it worked with plasma on standby or on a dark pic he didnt beleave it. does now though

I did read about taking tv off energy saving mode which i done and one about the sensor wich my tv doesnt have

 

[Code2006]

Is there any universal remotes that work on the vu solo 2?

 

[sataday]

Plasma interference is the problem. I had the same issue with my vu+solo2 and Panasonic plasma TV. What I did was to put a piece of black tape (approx 5mm x 10mm) on the top half of the remote sensor on the box, and that sorted it.

 

[Code2006]

Plasma interference is the problem. I had the same issue with my vu+solo2 and Panasonic plasma TV. What I did was to put a piece of black tape (approx 5mm x 10mm) on the top half of the remote sensor on the box, and that sorted it.

Nice one
Will try that tomorrow
Can i have a pic plz if poss ?
Thanks

 

[v8rick]

Ive put some tape on mine looks like its sorted it.i won't say anything and i'll see if other half notices tonight cheers

Plasma interference is the problem. I had the same issue with my vu+solo2 and Panasonic plasma TV. What I did was to put a piece of black tape (approx 5mm x 10mm) on the top half of the remote sensor on the box, and that sorted it.

 

[sataday]

Not the best of pictures, but you should get the idea. The strip of tape is black and can't normally be seen. It's the camera flash that shows it up.

 

[arnie2014]

is this tape on the outside of the box or inside?

 

[Code2006]

It looks like it's on the outside
This advise should be a sticky very good info and trick

 

[arnie2014]

anybody know how I can change the mode for the RCU on the actually box itself, I believe you can set the vu+ solo2 to use the same mode/code as the RCU

iv tried using the remote itself by pressing 2 + 7 etc but doesn't work

 

[Code2006]

It's in the settings
Menu/ settings / remote something like that
You have 4 diffrent settings
That's on vix but it is somewhere tho