[ABM-DVB-S/S2] Premier Sports HD & Setanta Sports 1 HD

[macbaba]

sorry... didnt read all your posts. All sorted. Brilliant posts. thank you so much.

 

[thisntaht]

Did you ftp the xml file in post #15? And in providers enable swap? When you rescanned did your press the tv button on your remote?


Sent from my iPhone using Tapatalk

Thanks for the reply, yes I did all that exactly as you state but it's still in SD
Is there no ROI.XML I can use? Or will there be in the next version of vix?

 

[Andy_Hazza]

You can't have done it right. If you are on latest build (Hades 018) and ftp'd the sky xml file over n overwritten the existing one n followed my instructions you will have had em. Re-check everything. No, northern ireland custom only and the roi channels you said previously are then in the entertainment bouquet.


Sent from my iPhone using Tapatalk

 

[bbbuk]

Attached are the latest provider files (taken directly from OE-A github today) for:

Sky UK 28.2 (last updated approx 06/08/15)
Freesat 28.2 (last updated approx 08/07/15)
Terrestrial UK Freeview (last updated approx 21/07/15)
Virgin UK (last updated approx 01/08/15)
Sky ROI (last updated approx 25/07/15)
Cable NL (last updated approx 25/07/15)

View attachment ABM_ProviderFiles_070815.rar

 

[thisntaht]

You can't have done it right. If you are on latest build (Hades 018) and ftp'd the sky xml file over n overwritten the existing one n followed my instructions you will have had em. Re-check everything. No, northern ireland custom only and the roi channels you said previously are then in the entertainment bouquet.


Sent from my iPhone using Tapatalk

Ok that works fine, Thanks for the reply.
I guess what I'm looking for is to be able to keep the ROI.xml file as it is, but, with the added Setanta and Premier in HD.
Without having to go to another region. I (and many others) like the channel format of the ROI.xml as it is, with the RTE's and TV3 etc start at 101 in the main bouquet.
I like to keep the main bouquet, some do, some don't, each to their own etc.
Just wondering, Is there going to be an ROI.xml in the future builds with Setanta and Premier in HD? On main bouquet and sports bouquet?
I'm not tech savvy enough to write one myself but I'm sure there are guys here who could do it in their sleep,
Just asking

 

[lincsat]

Setanta and Premier share a stream, programming is the same, so if you have one, then you have both. The only difference is the EPG data as some events are blacked out in the UK and others blacked out in Ireland on official cards.

 

[bsdbm]

I had ran ABM as Northen Ireland which gets it without any modifications. Sorry. Try this one.

As per what ZoomZoomLuke started, I have added it to the same LCN as Northern Ireland.


XML attached. Extracted file goes in
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers

I used to have an F3s which had Setanta Ireland, Setanta HD and Setanta 1. I now have a Vu+ zero. I've added the xml in post #15 to the box but I don't have these channels. I have premier sport on 462 but I can't find the setantas. I just plugged my f3s into the TV to see if it was still showing all the setantas and it is. I want these channels for the 3pm games on Saturdays. Can anyone help me with getting my setup right? I'm a newbie and have limited experience have just followed guides on here to setup my box with openvix hades 018 and blue HD skin. Did scans through ABM. Thanks

 

[abu baniaz]

Better off going to 3.2 image which will have the latest files.

 

[bsdbm]

Ok. Where can I download that from? Will it automatically find the setanta channels? And will I be able to keep the blueHD skin? Sorry am a newbie! Learning!

 

[abu baniaz]

Latest images are on openvix.co.uk

You can install BlueHD again

 

[bsdbm]

installed it but now cannot seem to ftp or transfer/connect to box. I was able to find the vu in windows and explore it. Now i can't. Any ideas??

 

[lincsat]

As has been posted in other threads, Samba is not installed as standard, install it from the Network menu. You can FTP without samba.

 

[bsdbm]

Thanks, managed to figure getting samba installed and then could FTP to the box fine. However, I then had an issue with a "Timeout for Tuner Lock" issue which i couldn't fix, so decided after all that to go back to Hades 018 as had no issues like any of the above with that.

Rescanned through the AutoBouquetMaker and still cannot get Setanta, Setanta Ireland or Setanta 1. Tried just doing an "Automatic" scan from the main scanning menu, it took ages (circa 15 mins) but then Setanta was there somewhere. However, everything was an absolute mess and jumble of an order. The channels are obviously there somehow, but how do i go about just adding them in neatly somewhere into my nice channel list which gets created in ABM? Sorry for these q's but i really need the Setanta channels for the 3pm Saturday games, and i am a total newbie so don't know if i can add just single channels somehow?? Thanks all!

 

[abu baniaz]

Most probable cause of the timeout for tuner lock is tuner config error (telling receiver there is a signal wire connected to a tuner when there isn't one connected) or signal issue.

Samba is not required for FTP.

If you are using Hades 18, you need to replace the provider file.
Post 15 for manual transfer of file.
Post 43 for the ipk.

 

[bsdbm]

Thanks - so just because I am a newbie and want to make sure I get this spot on right....

I extract the XML file from the rar in post #15...and put the 'sat_282_sky_uk.xml' file into:
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers

Then, get the file (enigma2-plugin-extensions-sat282skyxmlupdate_25-07-2015_all.ipk) from post #43, and:
1. FTP the file to your tmp folder, "/tmp"
2. From the Menu > Setup > Vix then select 'Install local extension' to install the plugin and follow prompts including to reboot GUI.
3. From Menu > Setup > Service searching > AutoBouquetsMaker then select 'Start scan' to rescan.

Then the channels should appear? Thanks in advance for all help, will try above tonight when home if correct!

 

[judge]

Thanks - so just because I am a newbie and want to make sure I get this spot on right....

I extract the XML file from the rar in post #15...and put the 'sat_282_sky_uk.xml' file into:
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers

Then, get the file (enigma2-plugin-extensions-sat282skyxmlupdate_25-07-2015_all.ipk) from post #43, and:
1. FTP the file to your tmp folder, "/tmp"
2. From the Menu > Setup > Vix then select 'Install local extension' to install the plugin and follow prompts including to reboot GUI.
3. From Menu > Setup > Service searching > AutoBouquetsMaker then select 'Start scan' to rescan.

Then the channels should appear? Thanks in advance for all help, will try above tonight when home if correct!

Yes. Although updating to a current image and setting it up properly would probably be easier for you in the long run.

 

[bsdbm]

Yes. Although updating to a current image and setting it up properly would probably be easier for you in the long run.

Thanks Judge, what I think I will do is perform the above on the Hades that SB have working now and then backup the image to my USB stick.

Then, I will try and install 3.2 and get it all working. If I can't, then I can just revert back.

I assume the above would also be needed on 3.2 to get Setanta channels??

 

[abu baniaz]

Either 15 or 43. Not both.

The files are included in images after Hades 18, so no need to repeat.

 

[judge]

I assume the above would also be needed on 3.2 to get Setanta channels??

No, using a current image will usually contain all current updates.
Hades is no longer being developed so by reverting to it, you will also miss any future ABM updates.

 

[bsdbm]

Followed all of the above and did an automatic scan (outside of ABM) and managed to get the Setanta channels! They now appear on the channel list when I press the red button (to show "ALL CHANNELS") so at least I have them - albeit not next to the s*y sports channels where I would prefer them, but they are there none-the-less. Thanks All! This is still all on Hades 018. I have backed up the image to my USB stick now it is all working, and will try and load OpenVix 3.2 tonight and get it all working on there....wish me luck!