[VU+ Duo2] Cannot clear one channel.

[sandiego69]

Strange problem. I have a legal card which I use with CCcam 2.3. One channel (SCT HQ) has been replaced by another (PassionXXX) with identical parameters. This channel is on Hotbird 11717 V. The weird thing is I still get all the other 11 channels on the card but only audio on the channel in question.

If I use Webif and stream to my PC the video channel is cleared. I have rescanned numerous times and have no problems with any other channel from the same transponder. What I have noticed but may not be significant is when pressing OK twice I see on some channels the frequency is showing not 11717 but 14141. Strange!

I have a Duo2 with a twin DVB-S tuner. In other words two cables into the same tuner.

Please help.

 

[sandiego69]

Nobody with any thoughts at all?

 

[timofee]

They might be introducing pairing/encryption - same as the Sky HD channels.

Have you tried the card in an official box.

 

[sandiego69]

No as I don't use an official box. I rely on my trusty Duo2. As I said it is strange that if I Webif to my PC there is no problem and all clear. As far as I can also tell the transmission parameters/spec are exactly the same, so theoretically it was just a name change.

 

[Donnie]

Strange problem. I have a legal card which I use with CCcam 2.3. One channel (SCT HQ) has been replaced by another (PassionXXX) with identical parameters. This channel is on Hotbird 11717 V. The weird thing is I still get all the other 11 channels on the card but only audio on the channel in question.

If I use Webif and stream to my PC the video channel is cleared. I have rescanned numerous times and have no problems with any other channel from the same transponder. What I have noticed but may not be significant is when pressing OK twice I see on some channels the frequency is showing not 11717 but 14141. Strange!

I have a Duo2 with a twin DVB-S tuner. In other words two cables into the same tuner.

Please help.

I have the same issue, seems strange

 

[timofee]

There is a similar problem with some other channels that can't be discussed here.

You probably need to edit your lamedb file for this particular channel. The lamedb file is in the /etc/ folder, you can search for the channel in there and try changing the parameters.

 

[sandiego69]

Thanks. I did have a look in the lamedb but to be honest I don't really have a clue as to which parameters are correct or wrong.

The card supplier is not being much help. If you do find an answer please let me know. Thanks again.

 

[cartman11]

I have exact same problem using Vu+ Duo and CCCam

 

[Tkr001]

So how do I go about ascertaining what the parameters should be?

 

[DaMacFunkin]

Good question I would like to know also.
Thank you.