GigaBlue 4K Drivers update - needs USB flash to update everything

[twol]

Please note that a drivers update has just been applied to the OE-A and will be in the next build - to have all the updates you should perform a USB flash.
GigaBlue - gb7252] update initrd-cfe

*** ONLY A USB-FLASH WILL UPDATE THE STB USING BOOT.BIN, GPT.BIN, RESCUE.BIN, BOLT.BIN ***
*** PLEASE BACKUP IMAGES IN STARTUP_2 and STARTUP_3 FIRST - THEY WILL NO LONGER WORK, DUE TO UPDATED GPT.BIN (CHANGE OF PARTITION SIZES)! ***

* update boot.bin (remove old 3.14.28 entries)

* update gpt.bin STARTUP_1=1,6GB STARTUP_2=800MB STARTUP_3=800MB
Number Start (sector) End (sector) Size Code Name
1 2048 8191 3.0 MiB 8300 boot
2 8192 16383 4.0 MiB 8300 splash
3 16384 49151 16.0 MiB 8300 rescue
4 49152 65535 8.0 MiB 8300 kernel1
5 65536 3342335 1.6 GiB 8300 rootfs1
6 3342336 3358719 8.0 MiB 8300 kernel2
7 3358720 4997119 800.0 MiB 8300 rootfs2
8 4997120 5013503 8.0 MiB 8300 kernel3
9 5013504 6651903 800.0 MiB 8300 rootfs3
10 6651904 7731199 527.0 MiB 8300 swap

* update rescue.bin (increase file size limitation~500MB)

 

[redrobin]

Is this referring to a USB flash of OpenVix, if so Which OpenVix version will this apply from ?

 

[twol]

Is this referring to a USB flash of OpenVix, if so Which OpenVix version will this apply from ?

Good questions - Yes to USB flash and version 15 or later, as version 14 build was run before the GB update..

 

[twol]

Is this referring to a USB flash of OpenVix, if so Which OpenVix version will this apply from ?

Good questions - Yes to USB flash and version 15 or later, as version 14 build was run before the GB update....... and as pointed out there is a partition size change, so if you need to keep the Images in slots 2 & 3, you need to backup and restore afterwards.

 

[Dave5118]

Do you know if anything else is improved in the driver update?

 

[twol]

Do you know if anything else is improved in the driver update?

fixed audio lipsync of satip client / e2 streaming client
- fixed radio channel playback
- fixed audio control of spdif
- fixed video aspect ratio
- fixed fbc cable

 

[redrobin]

Guess from the logs, its gone into 5.2.16, which is a shame as i USB flash yesterday to 5.2.015

openvix: developer 5.2.016.011
[GigaBlue - gb7252] update gigablue-platform-util - fixed teletext hangup - fixed deep standby wakeup in case rcu is code2 - fixed playback lipsync in case videomode 1080i
[xtrend] recovery lost download files after et-view delete all files
openvix: developer 5.2.016.010

 

[Andy_Hazza]

Guess from the logs, its gone into 5.2.16, which is a shame as i USB flash yesterday to 5.2.015

openvix: developer 5.2.016.011
[GigaBlue - gb7252] update gigablue-platform-util - fixed teletext hangup - fixed deep standby wakeup in case rcu is code2 - fixed playback lipsync in case videomode 1080i
[xtrend] recovery lost download files after et-view delete all files
openvix: developer 5.2.016.010

Why a shame as ViX 5.2.017 has been released. [emoji1787]


Sent from my iPhone using Tapatalk

 

[twol]

Thats a different driver update ... the boot changes are in #15
If you putty into the receiver and do a cat /proc/partitions you should see the difference in partition size.
You should also have seen the special update on the Giga‘s LCD when you usb flashed.

 

[redrobin]

Why a shame as ViX 5.2.017 has been released. [emoji1787]


Sent from my iPhone using Tapatalk

Should be back to couch flashing now, had to switch my laptop on for the first time in ages (took a while for the Windows updates to finish)

 

[abu baniaz]

GigaBlue 4K Drivers update - needs USB flash

If you have flashed 015 or newer one by USB, you do not need to flash any other subsequent ones by USB.

A software update will be fine.