[ABM-DVB-S/S2] No UHD Channels on HD+ Bouquets

[djbobw]

Hi all,

I've just upgraded from a Vu+ Solo2 to a ZGemma H9 Twin to get UHD. After running ABM I notice I don't seem to have any of the UHD channels (UHD1 or demo channels) in any section. I've got every section for HD+ enabled, including non-indexed. I can manually scan the UHD frequency and the channels work (via the main tuner menu), but ABM doesn't seem to see them.

Would it be possible for ABM to create a UHD bouquet in the same way it does for HD/SD from each provider?

Also, when updating the config files in ABM the box crashes towards the end, around the HD+ #3 kind of time. Not something I've experienced before.

The box is brand new, with the latest OpenViX software, with good signal and wired ethernet 380Mbps connection.

Cheers all,

Bobby

 

[JonMMM]

I dont think that there are any UHD channels in the UK

 

[abu baniaz]

>>>the latest OpenViX software,
This means nothing concrete. Please say the number. Menu > Information > About

>>> when updating the config files in ABM the box crashes towards the end, around the HD+
Please upload the crash log that occurs when updating the provider files. I have the latest files on my image, so the update process does not kick in.


HD+ provider
That file is a lot of maintenance with adding several transponders/services. I think the person who used to do it passed away. It is open source and everybody can add changes/updates.


I doubt the 4K bouquet option can be added to all providers. Its is a global option and every provider will ask the question even if there are no 4K services. If only the questions were provider specific. It should however be possible to do so using a custom mix file

 

[abu baniaz]

>>>I can manually scan the UHD frequency and the channels work (via the main tuner menu), but ABM doesn't seem to see them.
What is the frequency? Is it scanned in the ~19 provider files?

 

[ronand]

the frequencies are not in the provider files. I'm having a look at it now

 

[ronand]

I couldn't get ABM to scan 10994H (UHD1 by Astra) -CANNOT READ DATA even though I'm sure the data was correct but did get it to scan 11392H for RTL UHD but it doesn't appear in any bouquet.

This is what I am getting in the log:

4914.1606> [ABM-DvbScanner] Reading services (LCN)...
<  4934.2239> [ABM-DvbScanner] Timed out reading SDT
<  4934.2246> [ABM-DvbScanner] Cannot fetch SDT for the following TSID_ONID list:  ['459:1', '3:85', 'ca1:3', '2:85', '40a:1', '441:1', '408:1', '445:1', '443:1', '449:1', '41f:1', '3f3:1', '404:1', 'd:85', '6:85', '3e9:1', '3ee:1', '454:1', '419:1', 'ca2:3', '3ea:1', '402:1', '44d:1', '40e:1', '422:1', '413:1', '420:1', 'c8d:3', 'c96:3', '21:85', 'c98:3', '3f5:1', '409:1', '3f7:1', 'b:85', '426:1', '4b1:1', '406:1', '424:1', 'c8e:3', '42c:1', '411:1', '437:1', '9:85', 'c94:3', '3f9:1', 'c90:3', 'c89:3', '401:1', '407:1', '431:1', 'f:85', 'c8c:3', '403:1', '5:85', '44c:1', 'c99:3', '43a:1', '416:1', 'c93:3', '3fc:1', '421:1', '3f4:1', '412:1', '3eb:1', '414:1', '425:1', '3f0:1', '43c:1', '410:1', '428:1', '3f2:1', '45d:1', '446:1', '434:1', '430:1', '436:1', 'c91:3', '7:85', '432:1', '3fe:1', 'c88:3', 'c95:3', '3f8:1', '41a:1', '451:35', '4:85', '10:85', '3fb:1', '455:1', '3ec:1', '440:1', '442:1', '438:1', 'c82:3', '41e:1', '8:85', '45b:1', '40b:1', '444:1', '41c:1', 'c84:3', '44a:1', '460:1', '41b:1', '3ef:1', '42e:1', '453:1', '448:1', '40f:1', '3fd:1', '3ed:1', '457:1', 'c:85', '3ff:1']
<  4934.2253> [ABM-DvbScanner] No LCNs found. Falling back to service ID.

3F5:1 is the tsid : onid for this transponder

 

[djbobw]

Thanks for all the responses. The box is running OpenViX 5.4.012. ronand is correct with the UHD channels being on 10994H (ProSieben website info also shows symbol rate of 22000 and FEC of 5/6). I'll upload the log file tomorrow.

Cheers
Bobby

 

[BrokenUnusableAccount]

The unencrypted UHD demo channels at 28.2°E are on 12441 V.
They work nicely on my Zgemma H7.

 

[abu baniaz]

Is there an official provider list? (Not a list on a website by someone different to the Provider)

RTL UHD is on 11391
RTL UHD Austria is on 11214
QVC Zwei UHD is on 12343

 

[abu baniaz]

The unencrypted UHD demo channels at 28.2°E are on 12441 V.
They work nicely on my Zgemma H7.

This thread is about HD+ provider on 19.2 East

 

[djbobw]

The unencrypted UHD demo channels at 28.2°E are on 12441 V.
They work nicely on my Zgemma H7.

I'm getting the FreeSat/FreeView test channel on 28.2E in its own little bouquet. Looks very nice, but the mainland Europe channels always seem to be better quality.

 

[djbobw]

Latest crash log attached.

Thanks.

View attachment Enigma2_crash_2021-05-17_09-18-09.log

 

[Huevos]

I couldn't get ABM to scan 10994H (UHD1 by Astra) -CANNOT READ DATA even though I'm sure the data was correct but did get it to scan 11392H for RTL UHD but it doesn't appear in any bouquet.

This is what I am getting in the log:

4914.1606> [ABM-DvbScanner] Reading services (LCN)...
<  4934.2239> [ABM-DvbScanner] Timed out reading SDT
<  4934.2246> [ABM-DvbScanner] Cannot fetch SDT for the following TSID_ONID list:  ['459:1', '3:85', 'ca1:3', '2:85', '40a:1', '441:1', '408:1', '445:1', '443:1', '449:1', '41f:1', '3f3:1', '404:1', 'd:85', '6:85', '3e9:1', '3ee:1', '454:1', '419:1', 'ca2:3', '3ea:1', '402:1', '44d:1', '40e:1', '422:1', '413:1', '420:1', 'c8d:3', 'c96:3', '21:85', 'c98:3', '3f5:1', '409:1', '3f7:1', 'b:85', '426:1', '4b1:1', '406:1', '424:1', 'c8e:3', '42c:1', '411:1', '437:1', '9:85', 'c94:3', '3f9:1', 'c90:3', 'c89:3', '401:1', '407:1', '431:1', 'f:85', 'c8c:3', '403:1', '5:85', '44c:1', 'c99:3', '43a:1', '416:1', 'c93:3', '3fc:1', '421:1', '3f4:1', '412:1', '3eb:1', '414:1', '425:1', '3f0:1', '43c:1', '410:1', '428:1', '3f2:1', '45d:1', '446:1', '434:1', '430:1', '436:1', 'c91:3', '7:85', '432:1', '3fe:1', 'c88:3', 'c95:3', '3f8:1', '41a:1', '451:35', '4:85', '10:85', '3fb:1', '455:1', '3ec:1', '440:1', '442:1', '438:1', 'c82:3', '41e:1', '8:85', '45b:1', '40b:1', '444:1', '41c:1', 'c84:3', '44a:1', '460:1', '41b:1', '3ef:1', '42e:1', '453:1', '448:1', '40f:1', '3fd:1', '3ed:1', '457:1', 'c:85', '3ff:1']
<  4934.2253> [ABM-DvbScanner] No LCNs found. Falling back to service ID.

3F5:1 is the tsid : onid for this transponder

Have you read the transponder and know what is present? Most likely that transponder only has "SDT Actual", not "SDT Other". What did you add in ABM to scan this?

 

[Huevos]

Also, if you want ABM to find HEVC service the service type would need to be added.

https://github.com/oe-alliance/AutoBouquetsMaker/commit/cb5210fd521cc7fd6b83595f3b20f888f539ab50

 

[Huevos]

Latest crash log attached.

Thanks.

View attachment 62030

That crash is in the skin. If anyone is interested in fixing it (not me), it happens here: https://github.com/OpenViX/skins/bl...20/Red-HD/skin_Red-HD_Templates.xml#L396-L400

	<screen name="MenuAppletConfigItemHeight35">
		<applet type="onLayoutFinish">
			self["config"].instance.setItemHeight(35)
		</applet>
	</screen>

Probably fixed by:

	<screen name="MenuAppletConfigItemHeight35">
		<applet type="onLayoutFinish">
			try:
				self["config"].instance.setItemHeight(35)
			except AttributeError:
				pass
		</applet>
	</screen>

 

[ronand]

Also, if you want ABM to find HEVC service the service type would need to be added.

https://github.com/oe-alliance/AutoBouquetsMaker/commit/cb5210fd521cc7fd6b83595f3b20f888f539ab50

That worked. Its now picking up the UHD channels and lumping them in with the Austrian channels. But its a start. I haven't been able to get dvbsnoop to do anything on my H7 to read the transponder unless there is an easier way?

Here are my xml files for the 2 transponders

View attachment hd+ xml.rar

 

[abu baniaz]

Signal finder will do it. There was an HEVC commit for it too.

 

[ronand]

I've made a few changes to the xmls and created a new "Andere" bouquet in which the UHD channels will appear. I hope my German is ok

 

[abu baniaz]

Skin crash fixed here: https://github.com/OpenViX/skins/commit/4a32fb35165e99a3867424aa8969e49f893bda9c

 

[ronand]

I've done a major overhaul of the HD+ ABM and it seems to be fairly ok now. UHD section created. One or two small things to sort in the next day or two. PR submitted.