Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[Mut@nt] HD51 Online Upgrade Crash (log attached)

I noticed the box seems to boot OK form a warm reboot and the 2nd log suggests (I think!) the wait at boot time is for networking to come up.
Yes, it's starting the network that adds the delay.
For your info., I have a mini router plugged in (powered) by the USB port of the receiver, and this takes abut 90 seconds to boot itself.
Which I would expect to be the cause of the problem.
Except that you say the problem only occurs with Vix v6, not v5.4
 
Can you completely disconnect it from the network. Remove the router so there is no WiFi. Then see if it boots.

To clarify, this is a LAN (wired) connection, not WiFi.
I already tried with networking off and the box boots perfectly / quickly (post 37)

I will try later with WiFi instead of LAN and see what happens.
 
Why do you have a USB powered mini-router attached? Your LAN cable would/should be connected to the RJ45 port on the mutant.
 
Why do you have a USB powered mini-router attached? Your LAN cable would/should be connected to the RJ45 port on the mutant.

Router is connected to the receiver by ethernet cable and provides mobile broadband.
The USB part is for power only and is much more convenient than finding another 240v socket for a power adapter.
 
So, the router is connected to mobile broadband? Because it's active, the box is probably trying to establish an internet connection. Doesn't explain why it comes up quicker in V5. Must be some difference in the networking stack in V6. @huevos and @birdman will find it, no doubt;)
 
So, the router is connected to mobile broadband? Because it's active, the box is probably trying to establish an internet connection. Doesn't explain why it comes up quicker in V5. Must be some difference in the networking stack in V6. @huevos and @birdman will find it, no doubt;)
Enigma2 hasn't started at this point, so v5/v6 won't make any difference.
We're still starting the underlying Linux system, and that's unlikely to have changed (much?).
 

OpenViX Feeds Status

Back
Top