Ultimo 4k froze updating

[thor1]

updating my Ultimo 4k last night from 6.7.003 to 6.7.019 and just froze, i am just left with Open Vix logo any way to recover it

 

[bellejt]

usb flash

 

[thor1]

is there a recovery files, i put image 6.7.003 on usb flash drive is that right beit just stops on boot logo

 

[bellejt]

download new image and unzip directly to usb stick fat32 then do usb flash.

 

[thor1]

will do

 

[thor1]

downloaded image 6.7.006 i get starting for about 15 seconds then goes to boot logo, nothing after that

 

[bellejt]

then you are not flashing the image rightly

https://www.openvix.co.uk/openvix-builds/Guides%20and%20Tutorials/Flashing%20Guides/VU+%20USB%20Flashing%20Guides/How%20to%20flash%20a%20VU+%20Ultimo%204k.pdf

 

[thor1]

when i unzip download it come as vuplus folder then a folder ultimo4k, do i put the vuplus folder or ultimo4k on usb

 

[bellejt]

#4 and follow instructions link

 

[thor1]

do i use vuplus or ultimo4k folder

 

[bellejt]

you do not need to use either. READ the link and #4

 

[thor1]

i have just put the files on USB, i have a tried a few differant images, not getting update prompt also tried all usb port front and rear

 

[abu baniaz]

You were meant to transfer the vuplus folder. By transferring that folder, the contents will be copied across too. Please post a picture/screenshot of your USB drive layout. What size is your USB flash drive What file system is it ( fat 16, fat 32, exfat)?

Secondly, does your receiver show up on your network? You can check with Angry IP scanner or logging in to your router.

 

[twol]

updating my Ultimo 4k last night from 6.7.003 to 6.7.019 and just froze, i am just left with Open Vix logo any way to recover it

I would be surprised if a software update killed the image completely…… have you tried accessing the box through a telnet(e.g. putty) session? Or checked network to see if it still shows up?

 

[thor1]

i was updating it just froze left it for about 30 minutes then turned it off, i would like some info on putty i have never used it and how does it work

 

[twol]

Putty allows a connection with the receiver so that you can execute linux commands and diagnose issues with the reciver…..providing you still have internet access.

 

[thor1]

my receiver shows up in my router info

 

[thor1]

You were meant to transfer the vuplus folder. By transferring that folder, the contents will be copied across too. Please post a picture/screenshot of your USB drive layout. What size is your USB flash drive What file system is it ( fat 16, fat 32, exfat)?

Secondly, does your receiver show up on your network? You can check with Angry IP scanner or logging in to your router.

 

[abu baniaz]

I have deleted the picture with your email address. The other pictures do not show the full layout structure of the USB flash drive.

A guide to Putty is here: https://world-of-satellite.com/threads/how-to-use-putty-for-unix-linux-commands.40948/
Can you please log into your receiver and issue following commands. Paste, don't type

init 4 && ENIGMA_DEBUG_LVL=4 /usr/bin/enigma2

Copy and paste the whole output into a text file and attach the file (not just contents).

Don't you have anyone who can help you remotely using temaviewer?

 

[thor1]

i am not sure what you mean with full layout structure of USB, the USB is only 1gb, thank you for deleting the other picture