Further piece of information for you. If you try to adjust screen settings for a particular HDMI port on the TV, you must ensure that there is not a 4K signal present on it. A 4K signal (2160) will cause the TV to grey out or otherwise suppress screen size options in the menu. I tested this on my Sony X95 for the HDMI 1 port to which my Vu+ Uno 4KSE receiver is connected. With the receiver set to 4K (2160p / 50Hz the screen size options part of the menu on the TV is disabled. I set the receiver to HD (1080p) 50Hz and power cycled both the TV and receiver in order to ensure a clean HDMI handshake. Once the port was in 1080p / 50Hz, the menu options for screen size became active and I could cycle the screen between Exact Pixel and two levels of overscan. There is absolutely no difference in the size of the display edges on the TV with the receiver set in 1080p or 2160p as expected.