Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[GiGaBlue UHD UE 4K] Adjust screen size?

...
Update:
I solved the screen size problem in OpenViX by going to settings/Audio &Video settings and changed the resolution from 1080 to 2160. As simple as that . Problem now solved


Thanks any way to all for suggestions, but in the end it was an openvix setting which sorted it
No, that's still pointing at an issue on your TV. Going from HD (1920x1080) to UHD (3840x2160) should just scale exactly on your TV. The fact that your expert settings are greyed out or not present on your TV menu points to a setup problem. We would have to see an EDID dump to check the full capability of the TV - receiver HDMI connection, but not worth doing if you have a kludge working which you are happy with.
 
Further piece of information for you. If you try to adjust screen settings for a particular HDMI port on the TV, you must ensure that there is not a 4K signal present on it. A 4K signal (2160) will cause the TV to grey out or otherwise suppress screen size options in the menu. I tested this on my Sony X95 for the HDMI 1 port to which my Vu+ Uno 4KSE receiver is connected. With the receiver set to 4K (2160p / 50Hz the screen size options part of the menu on the TV is disabled. I set the receiver to HD (1080p) 50Hz and power cycled both the TV and receiver in order to ensure a clean HDMI handshake. Once the port was in 1080p / 50Hz, the menu options for screen size became active and I could cycle the screen between Exact Pixel and two levels of overscan. There is absolutely no difference in the size of the display edges on the TV with the receiver set in 1080p or 2160p as expected.
 
Further piece of information for you. If you try to adjust screen settings for a particular HDMI port on the TV, you must ensure that there is not a 4K signal present on it. A 4K signal (2160) will cause the TV to grey out or otherwise suppress screen size options in the menu. I tested this on my Sony X95 for the HDMI 1 port to which my Vu+ Uno 4KSE receiver is connected. With the receiver set to 4K (2160p / 50Hz the screen size options part of the menu on the TV is disabled. I set the receiver to HD (1080p) 50Hz and power cycled both the TV and receiver in order to ensure a clean HDMI handshake. Once the port was in 1080p / 50Hz, the menu options for screen size became active and I could cycle the screen between Exact Pixel and two levels of overscan. There is absolutely no difference in the size of the display edges on the TV with the receiver set in 1080p or 2160p as expected.
Thanks , but it's getting too complicated for me now, and I can't do anything with tv anymore.
Thanks anyway
 

OpenViX Feeds Status

Back
Top