[VU+ Duo] Anyone got Airplayer to work after Zeus upgrade

[Clabs]

Gordyboy

At the end of the day, this is not commercial software. There is no huge team of developers ready and waiting to devolp new versions and maintain old ones and it relies to a very great extent on users feeding back with potential problems and workarounds.

I am sure I have thrown my toys out of the pram on here before but it really helps nobody.

As i said before, there is no harm on staying on the version that was working for you and then update when the problems are ironed out.

This is getting off topic now so the anser to the original poster (and you) is to not update until the plugin is fixed.

It is your choice.

 

[foz]

You can always use an older image if you want. Nobody forces you to upgrade.

Yes I am aware of that
I was not moaning, just wished I had read this before updating
If I go back I will take a full image back up so I can return when air player updates

 

[Clabs]

Foz

Yes - that seems like a good plan.

It is always having a read for a week or so after a new image is released to see if any issues pop up that might affect you.

 

[judge]

I just wonder if the developers felt badgered into getting the release out to satisfy the demand rather than waiting?

No, image was & is ready for release.

 

[abu baniaz]

I don't have an Apple device. I'll get it checked when my cousin comes round.

I entered the symblolic link and then installed the airplay. No errors in telnet log. Upon starting it, there were no issues either. The following is output of my debug log

+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
10800k video mem
 - double buffering available!
7560kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x783e60 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "TM-NANO remote control (native)" is a keyboard
Found 1 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> C55C
eHdmiCEC: send message 84 C5 5C 88 
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 80 channels/transponders and 202 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 1
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
found 19 spinner!
setIoPrio best-effort level 3 ok
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[Harddisk] enumerating network mounts...
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  single
sec config completed
[Time By]: Transponder
[EPGC] time updated.. but cache file not set yet.. dont start epg!!
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...executing main
OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
 - double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[SKIN] loading include: /usr/share/enigma2/ViX-Common/CommonSkin.xml
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
couldn't open /proc/stb/misc/12V_output
setLCDBrightness 25
setLCDBrightness 127
setLCDScrollspeed 150
setLCDRepeat 3
setLCDMode 1
Setting OSD position: 0 720 0 576
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
Plugin  Extensions/WebInterface failed to load: No module named plugin
[AirPlayer] search for Skins
[AirPlayer] found Skin Classic
[AirPlayer] using skin  /usr/lib/enigma2/python/Plugins/Extensions/AirPlayer/Skins/Classic/1280x720/skin.xml
[AirPlayer] running python  sys.version_info(major=2, minor=7, micro=3, releaselevel='final', serial=0)
[AirPlayer] Checking for usable AzBox service ... 
no

[AirPlayer] Checking for usable gstreamer service ... 
yes

[AirPlayUpdater] vumodel: vu+duo
[AirPlayUpdater] model: vu+duo
[AirPlayUpdater] vumodel: vu+duo
[AirPlayUpdater] model: vu+duo
[AutoBouquets] set language to  en
[AutoBouquets] fallback to default translation for default
[AutoBouquets] fallback to default translation for style 1
[AutoBouquets] fallback to default translation for style 2
[AutoBouquets] fallback to default translation for style 3
[AutoBouquets] fallback to default translation for style 4
[AutoBouquets] fallback to default translation for style 5
[AutoBouquets] fallback to default translation for default
[AutoBouquets] fallback to default translation for HD First
[AutoBouquets] fallback to default translation for Sort 1
[AutoBouquets] fallback to default translation for Sort 2
[AutoBouquets] fallback to default translation for Sort 3
[AutoBouquets] fallback to default translation for no
[AutoBouquets] fallback to default translation for /usr/share/enigma2/picon
[AutoBouquets] fallback to default translation for /picon
[AutoBouquets] fallback to default translation for /media/usb/picon
[AutoBouquets] fallback to default translation for /media/hdd/picon
[AutoBouquets] fallback to default translation for /media/cf/picon
[AutoBouquets] fallback to default translation for /usr/share/enigma2/picon
[AutoBouquets] fallback to default translation for /picon
[AutoBouquets] fallback to default translation for /media/usb/picon
[AutoBouquets] fallback to default translation for /media/hdd/picon
[AutoBouquets] fallback to default translation for /media/cf/picon
[AutoBouquets] fallback to default translation for Daily
[AutoBouquets] fallback to default translation for Weekly
[AutoBouquets] fallback to default translation for 30 Days
[AutoBouquets] fallback to default translation for AutoBouquets E2
[AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader
[AutoBouquets] fallback to default translation for AutoBouquets Downloader
[AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader
[XMLTVImport] autostart (0) occured at 1395445023.24
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 0 CI Slots 
starting hotplug handler
wasTimerWakeup failed!
[CrossEPG_Auto] AutoStart Enabled
[CrossEPG_Auto] Schedule Disabled at Fri 21 Mar 2014 23:37:03 GMT
[AutoBouquets] AutoStart Enabled
[AutoBouquets] AutoBouquets Schedule Disabled at (now=Fri 21 Mar 2014 23:37:03 GMT)
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Fri 21 Mar 2014 23:37:03 GMT)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Fri 21 Mar 2014 23:37:03 GMT)
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Fri 21 Mar 2014 23:37:03 GMT
[XMLTVImport] autostart (0) occured at 1395445023.37
[XMLTVImport] WakeUpTime now set to -1 (now=1395445023)
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
[Skin] Attribute not implemented: alphatest value: blend
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
[LogManager] probing folders
[LogManager] found following log's: ['/media/hdd/logs', '/home/root/logs']
[LogManager] looking in: /media/hdd/logs
[LogManager] /media/hdd/logs: bytesToRemove -10465861
[LogManager] looking in: /home/root/logs
[LogManager] /home/root/logs: bytesToRemove -10392161
[NTP]: setting E2 time: 1395445026.25
[EPGC] time updated.. start EPG Mainloop
playing 1:0:1:189D:7FD:2:11A0000:0:0:0:
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] decode picture... /usr/share/enigma2/ViX-Night-HD/picon_default.png
[Picload] decode picture... /usr/share/enigma2/ViX-Night-HD/picon_default.png
main thread is non-idle! display spinner!
[EPGC] 43023 events read from /etc/enigma2/epg.dat
RemovePopup, id = ZapError
allocate channel.. 07fd:0002
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 10773250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1023 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:189D:7FD:2:11A0000:0:0:0:
allocate demux
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[SEC] set static current limiting
0.0.0.0
192.168
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
executing opkg  --add-dest /:/ update
[OpenWebif] started on 443
[AirPlayer] found network dev eth0
[AirPlayer] starting AirPlayer version 0.4.1  on  mips32el
[AirPlayer] starting webserver
[AirPlayer] init Backend
[AirPlayer] init E2MediaBackEnd
[AirPlayUpdater] reading interface
[AirPlayUpdater] running on interface  

#######EDIT #mac address removed #

[AirPlayUpdater] vumodel: vu+duo
[AirPlayUpdater] model: vu+duo
[AirPlayUpdater] running on model: vu+duo
[AirPlayUpdater] BoxID is 2108211
[AirPlayUpdater] check validation
[AirPlayUpdater] validationKey KM3/YnufmRCGsRdu2IjEluDBJGIEfJ3vdKD+B9WrWzVwQ1mND8o7C+bfTSXe90SoiJmJNytagw2z4UFYLJzmI0oeoyzO3tIGDiraguQSByhVpZah6/3kJBiRoHN3fKO/vAIn0zIbypb+1LO9G3YiTUPx7OLND9Uiny8HpphtoPAP2jrK5n+Ds/4qrN6B+cK8c1QIFwUp+XavHRBQAcIY3Zvi1P9E41KvIbWlz6v52C7zXu7I4KNIpZ7vHDkXbtq0Ha7UteZVeabq8qkhD56ueTlkHUU13qhsQY7sX+dEVxvDTeK5CQ24UuLYsmwp0Vh+f+X6A0hy2ktf4/hIxfg73w==
[AirPlayer] using ServiceID:  4097
[AirPlayer] init protocol handler
[AirTunes] loading lib done
[AirPlayer] check for updates
[AirPlayer] update:  up to date
[AirPlayer] starting protocol hadler
[AirPlayer] starting webserver done
[AirPlayer] starting zeroconf
killall: zeroconfig: no process killed
[AirPlayer] starting zeroconf done
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 19, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1e8cec0 running
[eEPGCache] channel 0x1e8cec0 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (1388), and 1 audio stream(s) (1389), and the pcr pid is 1388, and the text pid is 138b
allocate demux
decoder state: play, vpid=5000, apid=5001
DMX_SET_PES_FILTER(0x1388) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1389) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x1388) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x138b) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - [EPGC] start caching events(1395445033)
ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
[eDVBCAService] new service 1:0:1:189D:7FD:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:189D:7FD:2:11A0000:0:0:0:
RemovePopup, id = ZapError
[SEC] sleep 500ms
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0100 for service_id 189d
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
eventNewProgramInfo 0 0
have 1 video stream(s) (1388), and 2 audio stream(s) (1389, 138a), and the pcr pid is 1388, and the text pid is 138b
decoder state: play, vpid=5000, apid=5001
[eDVBCIInterfaces] gotPMT
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[Dish] tuning failed
[SEC] set dynamic current limiting
executing opkg  --add-dest /:/ list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:37:15
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
sdt update done!
[OnlineVersionCheck] 0 Updates available
poll: unhandled POLLERR/HUP/NVAL for fd 69(16)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail viasat reading
Timeout!
KEY: 139 MENU
action ->  InfobarMenuActions mainMenu
KEY: 139 MENU
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action ->  OkCancelActions ok
KEY: 352 OK
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 352 OK
action ->  WizardActions ok
[SKIN] Parsing embedded skin <embedded-in-'AP_MainMenu'>
KEY: 352 OK
KEY: 399 GREEN
KEY: 399 GREEN
action ->  ColorActions green
[AirPlayer] open Update Screen
[AirPlayUpdater] reading interface
[AirPlayUpdater] running on interface  0c:c6:ac:01:17:13
[AirPlayUpdater] vumodel: vu+duo
[AirPlayUpdater] model: vu+duo
[AirPlayUpdater] running on model: vu+duo
[AirPlayUpdater] check validation
[AirPlayUpdater] validationKey BBsuSP60IiYcApwrhbTO9mRmO5eTwVYd8YVdeKWhqRXJrLTEq0kfU/G6JBf7yuxSt+aR2E+tzQXQ9JLxpRECqbRJhVqVpDk8n3Wwx4Kwv4nyolYHr+mrl2U/YyEOJ5GqN3LqHNH0SFWxUW3BZ6qkxpndHLTeWCoK5yN5fiA6+rdIbi5sTkC94Zl5uLLYQj0t53+fnsYHySVDV8yS0S+OHXh8DzG4jmM6xvI/FgIjHjoPiDBvyGs4GZb0ZidQDoCVU6T0UYGVjhy6uBs3OtFTafx18Zuorxn4UBDaio8IkUGu5zYzkEccS22gS0uXsSBlVhed0l7o2rLg3QYt4oLUOA==
[SKIN] Parsing embedded skin <embedded-in-'AP_UpdateScreen'>
halign must be either left, center, right or block!, not top. Please contact the skin's author!
valign must be either top, center or bottom!, not left. Please contact the skin's author!
KEY: 352 OK
action ->  OkCancelActions ok
unknown action OkCancelActions/ok! typo in keymap?
KEY: 352 OK
action ->  OkCancelActions OK
unknown action OkCancelActions/OK! typo in keymap?
KEY: 174 EXIT
action ->  OkCancelActions cancel
KEY: 174 EXIT
ER plugin not found
[OpenWebif] page '/' ok (cheetah template)
[OpenWebif] loading configuration file : /usr/share/enigma2/setup.xml
[OpenWebif] loading configuration section : time
[OpenWebif] loading configuration section : avsetup
[OpenWebif] loading configuration section : usage
[OpenWebif] loading configuration section : userinterface
[OpenWebif] loading configuration section : channelselection
[OpenWebif] loading configuration section : epgsettings
[OpenWebif] loading configuration section : subtitlesetup
[OpenWebif] loading configuration section : autolanguagesetup
[OpenWebif] loading configuration section : recording
[OpenWebif] loading configuration section : harddisk
[OpenWebif] loading configuration section : keyboard
[OpenWebif] loading configuration section : display
[OpenWebif] loading configuration section : softwareupdate
[OpenWebif] loading configuration section : remotesetup
[OpenWebif] loading configuration section : softcamsetup
[OpenWebif] loading configuration section : logs
[OpenWebif] loading configuration section : timeshift
[OpenWebif] loading configuration section : pluginbrowsersetup
[OpenWebif] loading configuration file : /usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/setup.xml
[OpenWebif] loading configuration section : vixsoftcammanager
[OpenWebif] page '/ajax/tv?_=1395445172744' ok (cheetah template)
[OpenWebif] page '/ajax/bouquets?_=1395445173172' ok (cheetah template)
ER plugin not found
[OpenWebif] page '/api/expandmenu?name=remote&_=1395445179851' ok (json)
KEY: 174 EXIT
action ->  OkCancelActions cancel
KEY: 174 EXIT
[OpenWebif] page '/api/remotecontrol?command=174&_=1395445181765' ok (json)
[OpenWebif] page '/ajax/screenshot?_=1395445182768' ok (cheetah template)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
KEY: 352 OK
action ->  WizardActions ok
[SKIN] Parsing embedded skin <embedded-in-'AP_MainMenu'>
KEY: 352 OK
[OpenWebif] page '/api/remotecontrol?command=352&_=1395445186813' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
[AutoTimer] Auto Poll
[AutoTimer] Auto Poll Started
job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
KEY: 400 YELLOW
KEY: 400 YELLOW
action ->  ColorActions yellow
[AirPlayer] pressed start
[AirPlayer] trying to stop if running
[AirPlayer] service stopped
[AirPlayer] trying to start
[AirPlayer] starting AirPlayer version 0.4.1  on  mips32el
[AirPlayer] starting webserver
[AirPlayer] init Backend
[AirPlayer] init E2MediaBackEnd
[AirPlayUpdater] reading interface
[AirPlayUpdater] running on interface  0c:c6:ac:01:17:13
[AirPlayUpdater] vumodel: vu+duo
[AirPlayUpdater] model: vu+duo
[AirPlayUpdater] running on model: vu+duo
[AirPlayUpdater] check validation
[AirPlayUpdater] validationKey FMPt/PbKLk4D+lU22iQardFOwnTRL0db+0eODpkg+gbo8BAmVZe0hB1U1IuEFBGqA6MM3F4Cp8jcl5zhqDdapgm/sICMvuddDbwM0A4UWNMNgbrrdyckjPOgyluAKQtBqnHqDjxdDmfyYTJ+W58yuzoQSYEudon0ZzQDuLJV7RyHgC9NeSGgSp1Vy7TJ3GMd7nZuOe4DRQyQAQw1CWIibaFWpvBFh4nUo3J0FjwVL7M6ijujELuClv1GQU2ipmB+Py7eHfqjLQTjsXP5YDCkQCpoXMqDTEFB7MfEExXU0TINGCHawkWWntwslVCtVlwS+Tv3a4nMs33S/5BHs9XrFw==
[AirPlayer] using ServiceID:  4097
[AirPlayer] init protocol handler
[AirTunes] loading lib done
[AirPlayer] check for updates
[AirPlayer] update:  up to date
[AirPlayer] starting protocol hadler
("Exception(Can be ignored): Couldn't listen on 0.0.0.0:6002: [Errno 125] Address already in use.", 'Plugins.Extensions.AirPlayer.protocol_handler', 'W')
("Exception(Can be ignored): Couldn't listen on 0.0.0.0:5000: [Errno 125] Address already in use.", 'Plugins.Extensions.AirPlayer.AirTunes', 'W')
[AirPlayer] starting webserver done
[AirPlayer] starting zeroconf
killall: zeroconfig: no process killed
[AirPlayer] starting zeroconf done
[OpenWebif] page '/api/remotecontrol?command=400&_=1395445213732' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
Timeout!
Timeout!
KEY: 174 EXIT
action ->  WizardActions back
KEY: 174 EXIT
[OpenWebif] page '/api/remotecontrol?command=174&_=1395445248883' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
KEY: 352 OK
action ->  OkCancelActions ok
KEY: 352 OK
[OpenWebif] page '/api/remotecontrol?command=352&_=1395445253299' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
KEY: 352 OK
action ->  WizardActions ok
[SKIN] Parsing embedded skin <embedded-in-'AP_MainMenu'>
KEY: 352 OK
[OpenWebif] page '/api/remotecontrol?command=352&_=1395445257044' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
KEY: 398 RED
KEY: 398 RED
action ->  ColorActions red
[AirPlayer] open Settings
[SKIN] Parsing embedded skin <embedded-in-'AP_ConfigScreen'>
[OpenWebif] page '/api/remotecontrol?command=398&_=1395445263515' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !
KEY: 174 EXIT
action ->  SetupActions cancel
KEY: 174 EXIT
[OpenWebif] page '/api/remotecontrol?command=174&_=1395445271595' ok (json)
Grabbing 32bit Framebuffer ...
... Framebuffer-Size: 1280 x 720
Grabbing Video ...
Resizing Video to 1280 x 720 ...
Merge Video with Framebuffer ...
Resizing Screenshot to 700 x 393 ...
Saving 24 bit /tmp/screenshot.jpg ...
... Done !

 

[roy0110]

Gordyboy - I know you are frustrated but that statement is just not fair.

We know why the image has been totally rewritten - to take advantage of new developments in the future and hats off to Andy because he must have put a hell of a lot of hours into this.

This was always going to be tough call because at the moment, outwardly, end users see no real benefit to updating. Indeed - some users will see it as a step back as there will be instances like this where certain things do not quite work as planned.

But this update is planning for the future and those small issues will be ironed out and improved - be it a problem with the image or with a particular plugin.

Why not stay on the version that worked for you and wait until these little bumps are ironed out? There is no harm in that.

In the meantime, post on the airplayer.biz forum for a resolution to this particular problem.

Just trying to be helpful.

i like the way you have posted here, with understanding, patience & respect, some senior members of the forum here should take note.

i agree also with what you say about sticking to older versions if that's what works.
i'm just curious about the planning for the future thing?
andyblac can't force developers to update their plugins, so we may see old plugins that some people can't seem to live without never working on vix.
and thats fine with a lot of other people that understand we need to move with the times, but what is this openssl 1.0 all about?
will it satisfy plugin hungry people?.. will it do away with plugins?
i'm sure everyone is eager to know, and i can't pretend to have read all the threads here, but the times i have 'flicked through' i can't recall seeing how advantageous zeus is going to be.
again, thanks for your input (above)

 

[abu baniaz]

Almost all image teams will update their build environments. Do they not update because a plugin does not work? If you look at the airplay changelog, there was a fix to work on the new IOS. Would it be a logical argument to give to Apple, Airplay does not work. You are wrong to bring out the new ios?

With any issue, an understnding of the root cause is required and being able to trace/see the fault.

Problem:
Airplay is not working on Vix Zeus

Cause that has triggered the issue:
This is becasue the Vix image is now using libssl.so.1.0.0.

Analysis:
Has the plugin author put in a requirement that libsssl = 0.98 or libsssl => 0.98
If he has put in equal to or greater than 0.98, it should work using latest libssl. Until he confirms this, it is a waiting game.

If there is a problem with libssl.so.1.0.0 other plugins will stop working too. The only way this can be identified is for people who experience issues to report them with accurate and helpful reports.

 

[judge]

some senior members of the forum here should take note.

???

andyblac can't force developers to update their plugins, so we may see old plugins that some people can't seem to live without never working on vix.

That's how updating & new working plugins get developed.

 

[roy0110]

???

That's how updating & new working plugins get developed.

you're quoting me here for what exactly?
i'm sorry, but i don't understand any of it.

 

[abu baniaz]

Comments like "some senior members of the forum here should take note" rub people the wrong way. If there is an issue with a post by a "senior" or "junior" person, report it. If there is an issue with a moderator, don't argue with them in public, send a PM explaining your objection to their post. Send a PM to Admin if you must.

It is only a hobby. No need to get upset or upset anyone. Let us keep helping each other by sharing knowledge/experience. Rants will not help anyone. Nor will posts with little information to work off.

Person making posts:
Post in such a way that a person reading can understnd what you want to say, what your issue is, any errors. and how tehy can help you. They are not there in aperson and tehy do not have a glass ball.

Person responding
Not everybody has the same knowledge/experience. You were once a newbie. Respond in such a way that the person is helped.

 

[abu baniaz]

Taken from

https://www.openssl.org/news/

OpenSSL Security Advisory [10 May 2012]
=======================================

Invalid TLS/DTLS record attack (CVE-2012-2333)
===============================================

A flaw in the OpenSSL handling of CBC mode ciphersuites in TLS 1.1, 1.2 and
DTLS can be exploited in a denial of service attack on both clients and
servers.

DTLS applications are affected in all versions of OpenSSL. TLS is only
affected in OpenSSL 1.0.1 and later.

Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic fuzzing
as a service testing platform.

The fix was developed by Stephen Henson of the OpenSSL core team.

Affected users should upgrade to OpenSSL 1.0.1c, 1.0.0j or 0.9.8x

References
==========

URL for this Security Advisory:
http://www.openssl.org/news/secadv_20120510.txt

 

[Rob van der Does]

First of all, I would like you to know that all our team members spent literally hundreds of hours testing the new image and that we only released it when we were all happy to see it working without any flaw.

I also would like you to understand that all of us/you have a different set up; this includes plugins used. As there are so may plugins out there, chances are that the public uses one or more plugins that have not been used/tested by the team.

An example of this is Airplayer, as none of us uses an Apple device. So we are grateful for reports about issues we haven't discovered ourselves, and we have committed ourselves to try to get any issue fixed.
Doesn't it strike you that MS works the same way

Anyway: this is where we are limited. While we are offering Open Source software, allowing everybody to make personal changes and hence providing an easy way for plugin authors to adapt their work to our image, many plugins are closed source. No idea why, but that's a fact of life.
If an authors has no interest in doing so, we can be of assistance if the plugin is also open source. If not, it's the end of the story.

So please: report issues (as you do), stop moaning (as that will only lead to loosing our interest in the issue), and don't accuse us of not testing properly or enough.


PS: Could Airplayer users please see if the attached version works? I tried it, and it starts (and that's all I can test).

 

[Flyingpig]

Hello Rob van der Does,

I will check this in a bit - however, I am currently running this version on my ET9000 and it works and starts, but you cannot play movies or vids from the I-Pad / I-Phone to be shown on the TV.

A message appears on my screen saying;

"Airtunes audio streaming is not implemented for this box type"

However, you can view picture from the Ipad / Iphone on the airplayer, and this app makes them appear on the TV like Magic.

 

[foz]

just downloaded test results back in 5 minutes
foz
when adding premium key i still get :-

Your Premium-Status could not be checked because:
libssl.so.0.9.8: cannot open shared object file: No such file or directory

crashes and gives message airtunes not supported with this box type

 

[Rob van der Does]

OK, thanks, it was worth a try. So we really have to await a fix by the author.

 

[skratch]

Afraid it didn't work for me either. same error as last time on vu+ duo

 

[foz]

i have sent a log to abu
if you add sumbolic link you can add preium key
but black screen after airtunes message when trying to play moviebox etc
thanks for trying guys :thumbsup:
foz

 

[abu baniaz]

Best to upload logs here mate. (not received it though) That way everyone can check and these can be forwarded to the plugin author.

 

[foz]

attached log
ive also posted log on authors site
foz

 

[gordyboy]

At the end of the day I am a great believer in open dialogue, constructive not derogatory or offensive.

Everyone on this forum respects [should respect] all the hard work that goes into new developments.

I've said my point.