[VU+ Solo4K] Crash coming out of standby

[db49er]

When TV turned on box comes out of standby and crashes three times before operating normally....logs attached. This first occurred after flashing 6.1.003 so reverted to 6.0.008 and all returned to normal. Hoped that 6.1.004 would cure problem but not so.

 

[ccs]

This is the 6.1.004 crash...

< 31029.8763> [eHdmiCEC] received message 05 84 20 00 05
< 31029.8766> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Report Physical Address>, cmd=84, ctrl0=32, length=4
< 31030.0166> [eHdmiCEC] received message 05 87 08 00 46
< 31030.0170> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Reporting Device Vendor ID>, cmd=87, ctrl0=8, length=4
< 31031.2543> [eHdmiCEC] received message 05 72 00
< 31031.2545> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Set System Audio Mode>, cmd=72, ctrl0=0, length=2
< 31031.2546> [HdmiCEC][messageReceived4]: volume forwarding=0, msgaddress=5
< 31050.6744> [eHdmiCEC] received message 05 84 20 00 05
< 31050.6746> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Report Physical Address>, cmd=84, ctrl0=32, length=4
< 31050.8149> [eHdmiCEC] received message 05 87 08 00 46
< 31050.8151> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Reporting Device Vendor ID>, cmd=87, ctrl0=8, length=4
< 31060.8262> [eHdmiCEC] received message 00 84 00 00 00
< 31060.8264> [HdmiCEC][messageReceived0]: msgaddress=0  CECcmd=<Report Physical Address>, cmd=84, ctrl0=0, length=4
< 31060.9871> [eHdmiCEC] received message 00 87 08 00 46
< 31060.9873> [HdmiCEC][messageReceived0]: msgaddress=0  CECcmd=<Reporting Device Vendor ID>, cmd=87, ctrl0=8, length=4
< 31061.1279> [eHdmiCEC] received message 00 82 00 00
< 31061.1281> [HdmiCEC][messageReceived0]: msgaddress=0  CECcmd=<Active Source>, cmd=82, ctrl0=0, length=3
< 31061.3349> [eHdmiCEC] received message 05 A0 08 00 46 00 0A 00
< 31061.3351> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Vendor Command With ID>, cmd=A0, ctrl0=8, length=7
< 31063.5454> [eHdmiCEC] received message 05 84 20 00 05
< 31063.5456> [HdmiCEC][messageReceived0]: msgaddress=5  CECcmd=<Report Physical Address>, cmd=84, ctrl0=32, length=4
< 31063.6196> [eHdmiCEC] received message 00 83
< 31063.6198> [HdmiCEC][messageReceived0]: msgaddress=0  CECcmd=<Give Physical Address>, cmd=83, ctrl0=32, length=1
< 31063.6204> Traceback (most recent call last):
< 31063.6204>   File "/usr/lib/enigma2/python/Components/HdmiCec.py", line 413, in messageReceived
< 31063.6211>   File "/usr/lib/enigma2/python/Components/HdmiCec.py", line 515, in sendMessage
< 31063.6215> UnicodeDecodeError: 'ascii' codec can't decode byte 0xff in position 0: ordinal not in range(128)
< 31063.6216> [ePyObject] (CallObject(<bound method HdmiCec.messageReceived of <Components.HdmiCec.HdmiCec object at 0xb179e898>>,(<enigma.iCECMessagePtr; proxy of <Swig Object of type 'ePtr< iCECMessage > *' at 0xaeb69758> >,)) failed)

 

[twol]

When TV turned on box comes out of standby and crashes three times before operating normally....logs attached. This first occurred after flashing 6.1.003 so reverted to 6.0.008 and all returned to normal. Hoped that 6.1.004 would cure problem but not so.

try this attachment....
1.putty.
login root/password
init 4(space between)

2. filezilla.
rename /usr/lib/enigma2/python/Components/HdmiCec.pyc to xHdmiCec.pyc
copy attachment to /usr/lib/enigma2/python/Components

3. putty ---> init 6(space between)

 

[db49er]

Thank you for suggestion but I have reverted this box to 6.0.008

 

[ccs]

Thank you for suggestion but I have reverted this box to 6.0.008

So you didn't try the download suggested in post #3 ?

 

[db49er]

No, I am afraid not. It was so irritating and spoiling recordings that I reverted before I had seen the post.