[CrossEPG-Config] Cross EPG not download on 4.1.014

[poklok]

Hi,

Today I seem to be having issues downloading the CrossEPG data on my Edison running the latest update.

I have crossEPG to download everyday to my HDD. Configured to use OpenTV SKY UK.

It seems to do something but seems much quicker than previously and the data is not populated in crossEPG.

Can someone point me in the right direction.

Thanks,

27/06/2016 23:43:11 SIFTeam CrossEPG Downloader 0.8.1+gitrAUTOINC+18c4f08afa (c) 2009-2014 Sandro Cavazzoni (https://github.com/oe-alliance/e2openplugin-CrossEPG)
27/06/2016 23:43:11 This software is distributed under the terms of the GNU Lesser General Public License v2.1
27/06/2016 23:43:11 Interactive: OPEN cmd received
27/06/2016 23:43:11 EPGDB opened (root=/media/hdd/crossepg)
27/06/2016 23:43:11 Clearing old aliases...
27/06/2016 23:43:11 Loading 'aliases.conf'...
27/06/2016 23:43:11 Loaded 1 aliases
27/06/2016 23:43:11 Adding new aliases...
27/06/2016 23:43:11 Completed
27/06/2016 23:43:11 Interactive: OK action sent
27/06/2016 23:43:11 Interactive: DEMUXER cmd received
27/06/2016 23:43:11 Interactive: OK action sent
27/06/2016 23:43:11 Interactive: FRONTEND cmd received
27/06/2016 23:43:11 Interactive: OK action sent
27/06/2016 23:43:12 Interactive: DOWNLOAD cmd received
27/06/2016 23:43:12 Started OpenTV events download
27/06/2016 23:43:12 Reading dictionary '/usr/crossepg/providers/skyuk_astra2_28.2.dict' ...
27/06/2016 23:43:12 Completed. Read 512 values
27/06/2016 23:43:12 Reading channels...
27/06/2016 23:43:22 Read 906 channels
27/06/2016 23:43:22 Reading titles...
27/06/2016 23:43:29 Read 4.21 MB
27/06/2016 23:43:29 Parsing titles...
27/06/2016 23:43:32 Titles parsed
27/06/2016 23:43:32 Reading summaries...
27/06/2016 23:43:44 Read 74 KB
27/06/2016 23:43:44 Parsing summaries...
27/06/2016 23:43:44 Summaries parsed
27/06/2016 23:43:44 Ended OpenTV events download
27/06/2016 23:43:44 Interactive: SAVE cmd received
27/06/2016 23:43:44 Interactive: CLOSE cmd received
27/06/2016 23:43:44 EPGDB closed
27/06/2016 23:43:44 Interactive: OK action sent
27/06/2016 23:43:44 Interactive: QUIT cmd received

 

[Huevos]

Works fine here.

Your log shows a problem reading the summaries. Can you post your exact setup so someone can test.

 

[edevs]

same here on vu solo2

 

[poklok]

Settings are as follows:

System - EPG - Settings
EPG Location /media/hdd
filename: epg
No
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
0
Yes
Yes

CrossEPG - Configure
No
Once a day
4:00
yes
yes

XMLTV - Nothing selected

OpenTV - Sky UK OpenTV

Script Providers - None Selected

EPG-Importer - New (i think) - Default Settings - not configured anything.

Please let me know if you want further information or if there is a better way of providing this information.

 

[abu baniaz]

Uploading debug log that captures the execution may be beneficial.

 

[poklok]

Debug Log Attached: View attachment Enigma2-2016-06-28_17-29-03.log

Hope this helps solve the issue.

 

[abu baniaz]

Can't seen anything obvious apart from excerpt below, hopefully someone else can.

<    86.324> [eDVBChannel] OURSTATE: tuner 1 failed, fatal

<    63.913> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 60(16)

Have you tried to delete the EPG data? The delete feature is in the EPG menu. (load/save/delete)

 

[poklok]

i noticed these too.

Both tuners are working fine. I have verified this.

I have tried deleting the epg data and confirm that it is deleted and tried again and still the same problem.

Thanks.

 

[poklok]

I changed the save location to the Internal Flash and it downloads correctly. Switching back to /media/hdd causes it to not display.

The HDD is working correctly as I am able to record to it.

 

[abu baniaz]

Try this plugin to delete EPG (install then run). Then retry using HDD again.

It will restart the receiver. Please uninstall it after you have used it.

 

[poklok]

Have installed the ipk and followed your instructions and it still doesn't download the epg.

I thought i may be to do with the hdd so have reinitialized and run a filesystem check too but still nothing.

 

[abu baniaz]

Lets try something. Create an Image backup and save it to your PC for restoration later.

Flash 015. Do not restore anything. Do not install any plugins. Set your tuners, run ABM for UK only. Then set and run CrossEPG downloader (using HDD option). Report back results please.

 

[poklok]

Exactly the same outcome.

 

[Huevos]

What receiver is this?

 

[poklok]

Edision OS MINI 2x DVB-S/S2

 

[abu baniaz]

Just remind me, is this an external HDD?

 

[abu baniaz]

See this thread, may be similar issue
http://www.world-of-satellite.com/s...meone-please-help-me-solve-my-cross-epg-issue

 

[poklok]

Yes it is a external HDD.

I read through that thread, and have done the following. Without changing or swapping any cables or HDD.

Restored my backup that I created earlier to restore all settings and plugins.
Tested the EPG download, it still didn't work.
Started a recording on Tuner A.
Switched to another channel so that Tuner B was active.
Started the CrossEPG from Blue button menu as before.
Screen went blank as EPG data downloaded.

Success EPG downloaded.

I stopped the recording and deleted the EPG data and tried again and once again it downloaded fine.

I have restarted the box and have repeated again and it is working as it should.

Thanks for the help tying to resolve this random issue. At least this might help someone else who runs into this issue.

 

[Busterroo]

Hi folks, I've had this problem with a couple of Edison boxes since I started using the new image but I am reluctant to say it's image related. Anyway if you go Menu>Setup>System>Customise>Prefered Tuner, and set it to tuner B it works like a dream every time.:thumbsup:

 

[poklok]

This also happened again today on the latest image but I wasn't able to grab any logs. I will make your suggested change.